Search results for " Solar"
showing 10 items of 958 documents
Influence of the intermediate density-of-states occupancy on open-circuit voltage of bulk heterojunction solar cells with different fullerene accepto…
2010
Electron density of states (DOS) and recombination kinetics of bulk heterojunction solar cells consisting of a poly(3-hexylthiophene) (P3HT) donor and two fullerene acceptors, either [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) or 4,4′-dihexyloxydiphenylmethano[60]fullerene (DPM6), have been determined by means of impedance spectroscopy. The observed difference of 125 mV in the output open-circuit voltage is attributed to significant differences of the occupancy of the DOS in both fullerenes. Whereas DPM6 exhibits a full occupation of the electronic band, occupancy is restricted to the tail of the DOS in the case of PCBM-based devices, implying a higher rise of the Fermi level in the D…
Enhanced power-conversion efficiency in organic solar cells incorporating copolymeric phase-separation modulators
2018
A new class of copolymers containing oligothiophene moieties with different lengths and fullerene units have been designed and prepared by an easy and inexpensive one-step synthetic approach. The incorporation of small quantities of these copolymers into bulk heterojunction (BHJ) solar cells with donor regioregular polythiophene (P3HT) and an acceptor fullerene derivate (PCBM) results in good control of the phase separation process without further affecting the BHJ optoelectronic properties. Indeed, under thermal annealing these copolymers allow the modulation of the growth of domains whose size depends on the length of the copolymer repetitive units. Domain size on the same length scale as…
Phenothiazine dye featuring encapsulated insulated molecular wire as auxiliary donor for high photovoltage of dye-sensitized solar cells by suppressi…
2019
Abstract Two efficient dye-sensitized solar cells have been fabricated by two novel D–D–π–A phenothiazine-based organic dyes (PH2 and PH3) with an encapsulated insulated molecular wire (EIMW) as an auxiliary donor. The cell sensitized by PH2 with EIMW as an auxiliary donor shows a much higher photovoltage (Voc) relative to the reference dye PH1 without EIMW, because the former dye can inhibit dye aggregation and suppress the charge recombination effectively. The results show that the cell sensitized by PH2 with co-adsorption of chenodeoxycholic acid obtains a high power conversion efficiency, even higher than that of the cell based on N719. Thus, an effective way to increase the photovoltag…
Influence of Nitrogen Doping on Device Operation for TiO 2 -Based Solid-State Dye-Sensitized Solar Cells: Photo-Physics from Materials to Devices
2016
International audience; Solid-state dye-sensitized solar cells (ssDSSC) constitute a major approach to photovoltaic energy conversion with efficiencies over 8% reported thanks to the rational design of efficient porous metal oxide electrodes, organic chromophores, and hole transporters. Among the various strategies used to push the performance ahead, doping of the nanocrystalline titanium dioxide (TiO 2) electrode is regularly proposed to extend the photo-activity of the materials into the visible range. However, although various beneficial effects for device performance have been observed in the literature, they remain strongly dependent on the method used for the production of the metal o…
Synchrotron Radiation and Chemistry: Studies of Materials for Renewable Energy Sources
2014
We present an overview of selected applications of synchrotron radiation methods to topical chemical research. The analysis is limited to the studies on materials for renewable energy sources, focussing on topics peculiar to chemical research, such as reactivity and synthesis routes; in particular, the paper takes into account subjects having some relevance for the production and storage of energy based on hydrogen. Hydrogen production and storage are taken into account in the sections concerning: (i) Dye-sensitized solar cells, (ii) Metal-organic frameworks and (iii) Hydrides for hydrogen storage; production of energy by fuel cell devices is treated in (iv) Oxide ion and proton conductors …
How the formation of interfacial charge causes hysteresis in perovskite solar cells
2018
In this study, we discuss the underlying mechanism of the current-voltage hysteresis in a hybrid lead-halide perovskite solar cell. We have developed a method based on Kelvin probe force microscopy that enables mapping charge redistribution in an operating device upon a voltage- or light pulse with sub-millisecond resolution. We observed the formation of a localized interfacial charge at the anode interface, which screened most of the electric field in the cell. The formation of this charge happened within 10 ms after applying a forward voltage to the device. After switching off the forward voltage, however, these interfacial charges were stable for over 500 ms and created a reverse electri…
Multifunctional derivatives of dimethoxy-substituted triphenylamine containing different acceptor moieties
2020
This project has received funding from the Research Council of Lithuania (LMTLT), Agreement No. [S-LZ-19-2]. This research was funded by the Région Centre, the Tunisian ministry of research, University of Monastir and the French ministry of Higher Education and Research. J. Bouclé would like to thank the Sigma-Lim LabEx environment for financial supports, and the PLATINOM facility at XLIM laboratory regarding device fabrication and characterizations. DG acknowledges the Lithuanian Academy of Sciences for the financial support.
Recombination in Perovskite Solar Cells
2017
Trap-assisted recombination, despite being lower as compared with traditional inorganic solar cells, is still the dominant recombination mechanism in perovskite solar cells (PSCs) and limits their efficiency. We investigate the attributes of the primary trap assisted recombination channels (grain boundaries and interfaces) and their correlation to defect ions in PSCs. We achieve this by using a validated device model to fit the simulations to the experimental data of efficient vacuum-deposited p-i-n and n-i-p CH3NH3PbI3 solar cells, including the light intensity dependence of the open circuit voltage and fill factor. We find that, despite the presence of traps at interfaces and grain bounda…
Determination of electron and hole energy levels in mesoporous nanocrystalline TiO2 solid-state dye solar cell
2006
A study of a hybrid heterojunction solar cell based on nanocrystalline mesoporous TiO2 and the hole conductor spiro-OMeTAD (2,2′7,7′-tetrakis(N,N′-di-p-methoxyphenyl-amine)-9,9′-spiro-bifluorene) has been realized. Impedance and cyclic voltammetry techniques were used to measure the interfacial properties of the hybrid heterojunction and establish the energy levels of the solid-state electrolyte. It was observed that the energy levels of the organic hole transport material are changed when it forms a film deposited onto indium-doped tin oxide (ITO). Moreover, the HOMO level of the mono oxidized spiro-OMeTAD is well coupled with the HOMO level of the dye N719 (Ru(4,4′-dicarboxy-2,2′-bipyridy…
Structural and spectral properties of ZnO nanorods by wet chemical method for hybrid solar cells applications
2015
Abstract The synthesis of ZnO nanorods on transparent conducting oxides, Al doped ZnO seed layer on glass substrate (AZO) and indium tin oxide substrate (ITO) by using zinc nitrate hexahydrate (Zn (NO3)2·6H2O) and hexamethylenetetramine (HMT, (CH2)6N4 as raw materials is presented. The ZnO seed layer was fabricated by depositing an Al-doped ZnO thin film on glass substrate by sputtering. The effect of seeding on (AZO) and (ITO) substrate by using the wet chemical route growth of ZnO nanorods was investigated. The synthesized nanostructures of ZnO were characterized by X-ray diffraction (XRD), UV–vis absorption spectroscopy, scanning electron microscopy (SEM) and high-resolution transmission…