Search results for " Structural"
showing 10 items of 1751 documents
Influence of wall-to-floor connections and pounding on pre- and post-diction simulations of a masonry building aggregate tested on a shaking table
2023
AbstractThis paper presents numerical simulations within the frame of the project SERA—AIMS (Seismic Testing of Adjacent Interacting Masonry Structures). The study includes blind pre-diction and post-diction stages. The former was developed before performing the shaking table tests at the laboratory facilities of LNEC (Lisbon), while the latter was carried out once the test results were known. For both, three-dimensional finite element models were prepared following a macro-modelling approach. The structure consisted of a half-scaled masonry aggregate composed by two units with different floor levels. Material properties used for the pre-diction model were based on preliminary tests previou…
Simulation of blind pre-diction and post-diction shaking table tests on a masonry building aggregate using a continuum modelling approach
2023
AbstractMasonry buildings of historical centres are usually organized within aggregates, whose structural performance against seismic actions is challenging to predict and constitutes still an open issue. The SERA—AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) project was developed to provide additional experimental data by testing a half-scale, two-unit stone masonry aggregate subjected to two horizontal components of dynamic excitation. In this context, this paper investigates the reliability of the modelling approach and the assumptions adopted to generate a three-dimensional continuum finite element model. The work involves two stages, namely a blind pre-diction and a…
Properties of blended mortars produced with recycled by-products from different waste streams
2023
The construction industry encounters significant challenges in effectively managing solid waste produced during the extraction and production of building materials. In different countries, slurry waste generated from granite and marble processing industries, such as glass industry waste, constitutes a considerable portion of the total solid waste. Its undesirable disposal is causing unprecedented environmental damage. Using these non-biodegradable wastes to produce building materials would reduce the environmental burden and contribute to sustainable construction. This study, in detail, investigates the feasibility of utilizing Granite Powder (GP), Ground Granite Powder (GGP), and Ground Gl…
A closed form procedure for the design of longitudinal bars in RC sections subjected to axial load and biaxial bending
2020
This paper presents an analytical procedure for the design of the longitudinal reinforcement in reinforced concrete rectangular sections subjected to axial load and biaxial bending moment. The integration of the equilibrium equations is performed in analytical form for the case of uniaxial moment, including the effect of the reinforcement placed on the sides of the section and adopting code-based constitutive laws for steel and concrete. The strength domain of the section is calculated in closed form for the case of only main steel and in simplified form when including the reinforcement disposed on the side. Additionally, a formulation is proposed for the interaction domain of the two compo…
Development of a software package with GUI for the evaluation of monolithicity factors of RC jacketed columns
2023
The design of reinforced concrete (RC) jacketing for retrofitting substandard columns is a common practice when approaching the structural rehabilitation design of existing structures. In this framework, international technical codes suggest to assume the hypothesis of monolithic section and finally affecting the deduced performances by some empirical factors, known in the literature as monolithicity factors. The assessment of these coefficients is a difficult task, and only some rough assumptions can be found in the modern codes. This paper presents the development of a software package able to perform the static non-linear analysis of RC jacketed columns and evaluating the actual value of…
Variable Friction Dampers (VFD) for a modulated mitigation of the seismic response of framed structures: Characteristics and design criteria
2022
In this paper a new approach for the energy dissipation is discussed based on the use of Variable Friction Dampers (VFDs). The VFD device is borrowed from braking systems mechanical engineering, able to modulate its capability of dissipation, providing a constant pure friction force coupled with an additional (variable) damping force with the increasing of the displacement. Resorting to a previous study, the characteristics and the efficiency of the “braking” system in terms of reduction of the displacements and the restoring forces is described for SDOF systems under seismic excitations and compared with the performances achievable by classic constant friction dampers (CFDs). Then, a desig…
Simplified equivalent finite element modelling of concrete-filled steel tubular K-joints with and without studs
2022
Concrete Filled Steel Tubular (CFST) K-joints employed for truss structures gained high interest in the last years due to their widespread use in engineering practice. The overall performances of these joints can be efficiently improved by using steel studs welded in the inner surface of the steel chord filled with the concrete, avoiding punching shear failure, and improving the overall strength and ductility. However, a reliable prediction of the structural behavior of the joints is outmost of importance for the assessment of the capacity of new and existing structures, and there are no standardized design methods nowadays. In this paper, the structural performances of CFST K-joints with a…
Assessment of indoor illuminance and study on best photosensors' position for design and commissioning of Daylight Linked Control Systems. A new meth…
2018
Abstract Artificial lighting systems have to ensure appropriate illuminance with high energy efficiency according to best design practice and technical standards. These aims can be tackled, by incorporating a Daylight linked control system. However, the system behaviour is strongly influenced by several factors and, in particular, by the sensors' position. Indeed, very often the illuminance on work-plane is not fully correlated with illuminance measured by the photo-sensor used to control the luminaires. This fact leads to wrong information for the Daylight linked control systems affecting its efficacy. The artificial intelligence of Neural Networks can be exploited to provide a method for …
Thermal and structural properties of a hemp–lime biocomposite
2013
Abstract The need to reduce greenhouse gases emission produced by the building sector leads to the research of renewable and less impacting materials that can replace traditional ones. This subject has encouraged new researches on biocomposite concretes with the aim to exploit renewable resources like vegetal fibres intended as materials whose production processes are generally characterized by low costs and energy demand. This biocomposite is obviously much lighter than concrete and, therefore, can be suitably used in such cases where a structure cannot be overloaded, for instance in the realization of a green covering on top of a preexistent building. In this work, a first analysis of the…
The recent change in the Italian policies for photovoltaics: Effects on the payback period and levelized cost of electricity of grid-connected photov…
2015
Abstract This paper provides an economic analysis of the investment in grid-connected PV (photovoltaic) systems installed on the rooftops of buildings located in densely urbanised contexts. The analysis was applied to some case studies that were selected as representative of the latitudes of the southern, central and northern Italy. The returns of the investment in PV systems were investigated with the aim of comparing the impact of the current PV policy, based on the tax credit scheme, with the FIT (feed-in tariff) scheme, in force until July 2013. The cash flows related to the disbursements and benefits during the lifetime of the investment were computed for each combination of orientatio…