Search results for " Structural"
showing 10 items of 1751 documents
Out-of-plane elastic constants of curved cell walls honeycombs
2021
International audience; The work describes the out-of-plane properties of a curved wall honeycomb structure evaluated using analytical models and finite elements techniques. Out-of-plane properties are calculated using a theoretical approach based on energy theorems and validated using a fullscale<br>finite element technique to simulate transverse shear tests. The effects of the curvature of the walls and the depth of the honeycomb cells on the out-of-plane elastic constants are evaluated and excellent agreement is observed between theoretical and numerical models. These curved cell wall honeycombs feature specific (i.e., relative density weighted) highly tailorable upper shear bounds tha…
Application of cohesive-zone models to delamination behaviour of composite material
2012
International audience; The parameters of cohesive elements have to be chosen correctly in the simulation of composite delamination by finite element method: such as interface strength, interface stiffness and shape of cohesive law. The purpose of this work is to investigate their influence on the accuracy of the results obtained. A three-dimensional cohesive-zone model has been established using Ls-dyna to simulate Double-Cantilever-Beam mode I (DCB) and Edge-Notched-Flexure mode II (ENF) tests. The influence of these parameters of cohesive element on the maximum load and the slope of load-displacement curve have been discussed by comparing experimental and numerical results. Four traction…
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds
2017
Abstract The present work investigates the features of an active Infrared-NDT Thermography technique derived from a Flying Laser Spot set-up for the analysis of interlaminar disbonds in layered structures in general and Fibre Metal Laminates in particular. The presented technique uses a laser-spot heat source, which moves at a constant speed, raster scanning the object surface. Interlaminar defects parallel to the surfaces act as barriers towards through-the-thickness heat diffusion. This produces some modifications over the surface thermal field which are well identified in the Standard Deviation calculated over a Reference Area following the heat source. The mechanisms leading to such def…
A high-resolution layer-wise discontinuous Galerkin formulation for multilayered composite plates
2020
Abstract In this work, a novel high-resolution formulation for multilayered composite plates is presented. The formulations is referred to as high-resolution since it combines (i) Layer-Wise plate theories, which are based on a per-layer, high-order expansion of the primary variables throughout the plate’s thickness, providing a detailed layer-level description of the sought solution; (ii) The discontinuous Galerkin method, a numerical approach based on a discontinuous representation of the unknown fields over the mesh elements and on the introduction of boundary integral operators enforcing inter-element continuity, which allow the natural treatment of high-order mesh elements and provide …
A non-linear Ritz method for the analysis of low velocity impact induced dynamics in variable angle tow composite laminates
2021
Abstract Variable angle tow (VAT) laminates feature composite layers reinforced by fibres following continuous curved paths and offer a wide structural design space for the manufacturing of composite components. In this work, a formulation for the analysis of the impact-induced dynamics in VAT laminated plates is proposed, implemented and tested in this work. The method is based on the adoption of first order shear deformation kinematics and includes von Karman non-linear strains. The discrete system is obtained by employing a pb-2 Ritz series expansion into the Hamilton’s variational statement, while the impact loading is modelled through Hertzian contact law. The resulting non-linear gove…
Evaluation of building heating loads with dimensional analysis: Application of the Buckingham π theorem
2017
Abstract A detailed assessment of building energy performance requires a large amount of input data concerning building typology, environmental conditions, envelope thermophysical properties, geometry, control strategies, and several other parameters. Notwithstanding, the use of specialized software tools poses many challenges in regards to the retrieval of reliable and detailed information, setting a steep learning curve for engineers and energy managers. To speed up the preliminary assessment phase, it might be more convenient to resort to a simplified model that allows the evaluation of heating energy demand with a good level of accuracy and without excessive computational cost or user e…
Theorems of restricted dynamic shakedown
1993
Abstract Dynamic shakedown for a rate-independent material with internal variables is addressed in the hypothesis that the load values are restricted to those of a specified load history of finite or even infinite duration, thus ruling out the possibility—typical of classical shakedown theory—of indefinite load repetitions. Instead of the usual approach to dynamic shakedown, based on the bounded plastic work criterion, another approach is adopted here, based on the adaptation time criterion. Static, kinematic and mixed-form theorems are presented, which characterize the minimum adaptation time (MAT), a feature of the structure-load system, but which are also able to assess whether plastic w…
Thermal-hydraulic behaviour of the DEMO divertor plasma facing components cooling circuit
2017
Abstract Within the framework of the Work Package DIV 1 – “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by ENEA and University of Palermo to investigate the thermal-hydraulic performances of the DEMO divertor cassette cooling system. A comparative evaluation study has been performed considering three different options for the cooling circuit layout of the divertor Plasma Facing Components (PFCs). The potential improvement in the thermal-hydraulic performance of the cooling system, to be achieved by modifying cooling circuit layout, has been also assessed and discussed in terms of optimization strategy. The research acti…
The design of the DONES lithium target system
2019
Abstract In the framework of the EU fusion roadmap implementing activities, an accelerator-based Li(d,xn) neutron source called DONES (Demo-Oriented early NEutron Source) is being designed within the EUROfusion Work Package Early Neutron Source as an essential irradiation facility for testing candidate materials for DEMO reactor and future fusion power plants. DONES will employ a high speed liquid lithium jet struck by a 125 mA, 40 MeV deuteron beam to generate the intense neutron flux used to irradiate the material samples up to the desired level of displacement damage (˜10 dpa/fpy for iron in 0.3 l) and He production rates (˜10-13 appm He/dpa). In order to rapidly achieve a sound and stab…
Parametric study of the influence of First Wall cooling water on the Water Cooled Lithium Lead Breeding Blanket nuclear response
2019
Abstract In the framework of EUROfusion Work Package International Cooperation R&D activities, a close collaboration has been started among University of Palermo, ENEA Brasimone and ENEA Frascati for the development of the Water Cooled Lithium Lead (WCLL) Breeding Blanket (BB) concept. In this context, a research campaign has been carried out at the University of Palermo in order to investigate the influence of First Wall (FW) cooling water configuration on the nuclear response of the WCLL BB under irradiation in EU-DEMO, in order to gain useful indications for the WCLL BB pre-conceptual designs. To this end, three-dimensional nuclear analyses have been performed by MCNP5 v. 1.6 Monte Carlo…