Search results for " Structural"
showing 10 items of 1751 documents
Semi-continuous anaerobic digestion of solid poultry slaughterhouse waste: effect of hydraulic retention time and loading.
2002
Abstract We studied the effect of hydraulic retention time (HRT) and loading on anaerobic digestion of poultry slaughterhouse wastes, using semi-continuously fed, laboratory-scale digesters at 31°C. The effect on process performance was highly significant: Anaerobic digestion appeared feasible with a loading of up to 0.8 kg volatile solids (VS)/m 3 d and an HRT of 50–100 days. The specific methane yield was high, from 0.52 to 0.55 m 3 /kg VS added . On the other hand, at a higher loading, in the range from 1.0 to 2.1 kg VS/m 3 d, and a shorter HRT, in the range from 25 to 13 days, the process appeared inhibited and/or overloaded, as indicated by the accumulation of volatile fatty acids an…
Electrochemical oxidation of organics in water: Role of operative parameters in the absence and in the presence of NaCl
2008
The electrochemical oxidation of organics in water was investigated theoretically and experimentally to determine the role of several operative parameters on the performances of the process in the presence and in the absence of sodium chloride. Theoretical considerations were used to design the experimental investigation and were confirmed by the results of the electrochemical oxidation of oxalic acid (OA) at boron doped diamond (BDD) or IrO(2)-Ta(2)O(5) (DSA-O(2)) anodes in a continuous batch recirculation reaction system equipped with a parallel plate undivided electrochemical cell. Polarization curves and chronoamperometric measurements indicated that, in the presence of chlorides, the a…
Barrier properties of anti-gas military garments, considering exposure to gas organic compounds
2020
The problems of determining the protective properties of barrier materials used for the production of body surface protection products of an isolative type are very actual. These garments are expected to have long-term resistance against permeation of toxic substances. The paper deals with the study of the effect of organic solvent vapours on the changes in protective properties of selected anti-gas protective garments commonly used by the North Atlantic Treaty Organization armed forces. Permeation measurements of selected gases with integral permeameter were performed to verify their barrier properties, surface changes after exposure to selected solvents by using a 3D optical profilometer,…
The miniaturised emission chamber system and home-made passive flux sampler studies of monoaromatic hydrocarbons emissions from selected commercially…
2017
Abstract The estimation of the emission rate of organic compounds released from various types of indoor materials can be performed using stationary environmental test chambers (ETC) classified as ex-situ methods or small-scale portable analytical devices based on the use of passive technique at the stage of analytes sampling from the gaseous phase (in-situ methods). The paper presents results of emissions of selected organic compounds from the monoaromatic hydrocarbons group (benzene, toluene, ethylbenzene, p,m-xylene and styrene) emitted from the surfaces of various types of commercially-available floor coverings and the underlay made of polyurethane foam which might be installed indoors u…
Vapour condensation and moisture accumulation in porous building wall
2002
Simultaneous one-dimensional heat and vapour transfer with condensation in a porous wall is analytically investigated. Spatially steady-state distribution of accumulated moisture, less than the critical content, is described. Closed-form analytical expressions for the temperature, condensation rate and moisture content are obtained. The presented model requires material properties which are relatively simple and easy to determine. The results of the paper are illustrated with an example of multilayer building wall under climatic conditions.
An optimal dimensioning method of a green wall structure for noise pollution reduction
2021
International audience; This paper concern the optimization of a multilayered green wall structure including substrate and foliage in order to reduce as much as possible backward noise reflection and forward transmission from the wall. Each component involved in the wall structure is fully characterized experimentally to get its transfer matrix. Simulation demonstrated that foliage layer superimposed to substrate layer doesn’t affect the transmission losses but contributes greatly to the increase of return losses of the green wall structure. To achieve the best performances in terms of return and forward losses as well as frequency bandwidth, the methods of optimization are discussed inclu…
Application of a new dynamic transport model to predict the evolution of performances throughout the nanofiltration of single salt solutions in conce…
2018
Although many knowledge models describing the rejection of ionic compounds by nanofiltration membranes are available in literature, they are all used in full recycling mode. Indeed, both permeate and retentate streams are recycled in order to maintain constant concentrations in the feed solution. However, nanofiltration of real effluents is implemented either in concentration or diafiltration modes, for which the permeate stream is collected. In these conditions, concentrations progressively evolve during filtration and classical models fail to predict performances. In this paper, an improvement of the so called "Donnan Steric Pore Model", which includes both volume and concentration variat…
Flexural behaviour of external R/C steel fibre reinforced beam-column joints
2011
ABSTRACT A softened strut-and-tie macro model able to reproduce the flexural behaviour of external beam-column joint is presented. The model is specific for concrete with hooked steel fibres (FRC) and it is designed to calculate the flexural response, as load-deflection curve, of a beam-column sub-assemblages. The model considers the presence of a constant vertical load acting on the column and of a monotonically increasing lateral force applied at the tip of the beam.
Metal ion adsorption by phomopsis sp. Biomaterial in laboratory experiments and real Wastewater Treatments
2005
An insoluble material of polysaccharidic nature has been obtained by thermal alkali treatment of the filamentous fungus Phomopsis sp. FT-IR spectrum of the resulting material as well as its nitrogen content suggest that chitosan and glucans are the main components of the biomaterial. Information on Lewis base sites has also been obtained and used as a guideline in the evaluation of the complexing ability against a number of metal ions in aqueous media at pH in the range 4--6. Results indicate that after 24h contact time, up to 870 micromol/g of lead, 390 micromol/g of copper, 230 micromol/g of cadmium, 150 micromol/g of zinc and 110 micromol/g of nickel ions are adsorbed into the material. …
Evaluation of a microclimate model for predicting the thermal behavior of different ground surfaces
2013
The microclimate model ENVI-met Version 4 was evaluated with field data in terms of the thermal behavior of different types of ground surface. A field experiment was conducted in a real construction project in Guangzhou, South China, from 29 August to 2 September in 2010. The surface types of concrete, tile, asphalt and grass were investigated. The comparison between observation and prediction was performed for both sub- and above-surface variables, including soil temperature at different depths, soil heat flux at the surface, surface temperature, and air temperature and humidity at different heights. The results show that the ENVI-met model is capable of reasonably modelling the diurnal th…