Search results for " Structural"
showing 10 items of 1751 documents
Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites
2014
Abstract Recycled polyethylene terephthalate (rPET) nanocomposites with various amounts of montmorillonite clay (MMT) have been manufactured by using twin screw extrusion. By rising MMT weight content Wf up to 1 wt.% it is possible to increase yield strength and ultimate strength of the composite by 17% and 27% respectively in comparison to neat rPET. Introduction of MMT in the rPET leads also to considerable increase of the modulus of elasticity E. Relationship E(Wf), however, is non-linear and is characterized by slow-down in E growth along with increasing MMT content. At low nanofiller content experimental results are sufficiently well described by using the method of Mori–Tanaka and the…
On the thermal-hydraulic performances of the DEMO divertor cassette body cooling circuit equipped with a liner
2020
Abstract In the framework of the Work Package DIV 1 - “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by University of Palermo and ENEA to investigate the steady-state thermal-hydraulic performances of the DEMO divertor cassette cooling system. The research activity has been focussed onto the most recent design of the Cassette Body (CB) cooling circuit, consistent with the DEMO baseline 2017 and equipped with a liner, whose main function is to protect the underlying vacuum pump CB opening from plasma radiation. The research campaign has been carried out following a theoretical-computational approach based on the finite vo…
Thermal-hydraulic study of the DEMO divertor cassette body cooling circuit equipped with a liner and two reflector plates
2021
Abstract In the framework of the Work Package DIV 1 – “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by University of Palermo and ENEA to investigate the steady-state thermal-hydraulic performances of the DEMO divertor cassette cooling system. The research activity has been focussed onto the most recent design of the Cassette Body (CB) cooling circuit, consistent with the DEMO baseline 2017 and equipped with a liner and two Reflector Plates (RPs), whose main functions are to protect the underlying vacuum pump hole from the radiation arising from plasma and shield the PFCs inlet distributors, respectively. The research ca…
Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement
2017
Abstract Within the framework of EUROfusion R&D activities, CEA-Saclay has carried out an investigation of the thermal and mechanical performances of alternative designs intended to enhance the Tritium Breeding Ratio (TBR) of the Helium-Cooled Lithium Lead (HCLL) Breeding Blanket (BB) for DEMO. Neutronic calculations performed on the 2014 DEMO HCLL baseline predicted a value of TBR equal to 1.07, lower than the required value of 1.1, necessary to ensure the tritium self-sufficiency of the breeding blanket taking into account uncertainties. In order to reach the TBR target, the strategy of the steel amount reduction inside the HCLL module breeding zone (BZ) has been followed by suppressing s…
On the effect of stiffening plates configuration on the DEMO Water Cooled Lithium Lead Breeding Blanket module thermo-mechanical behaviour
2019
Abstract Within the framework of the pre-conceptual design of the EU-DEMO Breeding Blanket (BB) supported by EUROfusion action, results of the research activities carried out in the last years have highlighted that changes in the proposed Water Cooled Lithium Lead (WCLL) BB design have to be considered, especially as to the liquid breeder circulation path within the BB module. Therefore, in view of the definition of a final WCLL BB module layout, a parametric campaign of numerical analyses has been carried out at the University of Palermo in order to assess the impact of different SPs configurations on the module thermo-mechanical performances. To this purpose, attention has been focussed o…
Start-up and shutdown thermomechanical transient analyses of the IFMIF European lithium target system
2014
In the framework of the current IFMIF Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) phase, ENEA is responsible for the design of the European concept of the IFMIF lithium target system which foresees the possibility to periodically replace only the most irradiated and thus critical component (i.e., the backplate) while continuing to operate the rest of the target for a longer period (bayonet backplate concept). With the objective of evaluating the performances of the system in terms of temperature, stress and displacement fields evolution during start-up and shutdown phases, an uncoupled thermomechanical transient analysis has been performed in close collaboration w…
Safety analysis of the DONES primary heat removal system
2020
Abstract The development of a neutron source able to reproduce the irradiation conditions typical of a nuclear fusion reactor, in order to test candidate structural materials, is the main goal of the Work Package Early Neutron Source (WPENS) of the EUROfusion action. This source, named Demo Oriented NEutron Source (DONES), is a facility where neutrons are produced by means of D-Li interactions. More in detail, a beam of 125 mA deuterium ions at the energy of 40 MeV strikes a lithium jet flowing in a purposely shaped channel in order to obtain an intense and stable neutron flux for the irradiation of material samples. In the framework of these activities, safety analyses are a key aspect in …
Thermal-hydraulic optimisation of the DEMO divertor cassette body cooling circuit equipped with a liner
2019
Abstract Within the framework of the Work Package DIV 1 - “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by University of Palermo and ENEA to investigate the thermal-hydraulic performances of the DEMO divertor cassette cooling system. The research activity has been focused onto the most recent design of the Cassette Body (CB) cooling circuit equipped with a Liner, whose main function is to protect the underlying vacuum pump hole from the radiation arising from the plasma. The research campaign has been carried out following a theoretical-computational approach based on the Finite Volume Method and adopting the commercial…
Modelling of the thermal mechanical behaviour of a single size beryllium pebble bed
2001
The Helium Cooled Pebble Bed (HCPB) Blanket for fusion power reactors and the ITER breeding blanket are based on the use of pebble beds of lithium ceramics as breeder and beryllium as neutron multiplier. Experimental activities were performed at Forschungszentrum Karlsruhe concerning the measurement of pebble bed heat transfer parameters. At the Department of Nuclear Engineering of the University of Palermo, the experimental results have been reproduced by means of the ABAQUS finite element code. Moreover, a thermal-mechanical theoretical model has been developed for single size beryllium pebble beds. In the paper the results from the numerical and theoretical analyses and the comparison wi…
Optical, structural, and morphological characterisation of epitaxial ZnO films grown by pulsed-laser deposition
2013
We report on ZnO epitaxial growth by pulsed-laser deposition (PLD) on different substrates, such as quartz, sapphire, and GaN template. Approximately 1 mu m-thick films were grown under different substrate temperatures and background oxygen conditions. X-ray diffraction analysis indicated preferential growth along the c-axis direction with a full-width at half maximum(FWHM) of the rocking curve as narrow as 230 arcs in the case of the GaN template. Low-temperature photoluminescence showed A-excitonic emission near 3.36 eV and a FWHM of (DXA)-X-0 emission as small as 2.89 meV at 9 K. Atomic force microscope measurements showed that roughness as low as 18 nm could be obtained. These results p…