Search results for " Structural"
showing 10 items of 1751 documents
Tritium distribution and chemical forms in the irradiated beryllium pebbles before and after thermoannealing
2011
Abstract Beryllium pebbles are foreseen as a neutron multiplier in the tritium breeding blanket of the future fusion devices. Tritium inventory in the beryllium as a result of neutron-induced transmutations is a significant safety and technological issue for the operation of the breeding blanket. In this study, beryllium pebbles from 3 different irradiation experiments: BERYLLIUM, EXOTIC 8/3-13 and PBA, performed at High Flux Reactor HFR have been investigated. The distribution of tritium in the bulk of the pebbles and the abundance ratios of chemical forms of tritium T 0 , T + and T 2 have been analysed before and after the different thermo-annealing experiments. In order to determine the …
Mechanical cleaning of graphene using in situ electron microscopy
2020
Avoiding and removing surface contamination is a crucial task when handling specimens in any scientific experiment. This is especially true for two-dimensional materials such as graphene, which are extraordinarily affected by contamination due to their large surface area. While many efforts have been made to reduce and remove contamination from such surfaces, the issue is far from resolved. Here we report on an in situ mechanical cleaning method that enables the site-specific removal of contamination from both sides of two dimensional membranes down to atomic-scale cleanliness. Further, mechanisms of re-contamination are discussed, finding surface-diffusion to be the major factor for contam…
Salt extraction from lime-based mortars: An experimental study using different poultice formulations
2020
Abstract The extractive capability of soluble salts in poultices treatments currently used in mortar conservation (ArbocelTM plus sepiolite; ArbocelTM, sepiolite and sand; Westox-Cocoon®) were tested to evaluate their efficiency and compatibility with specific mortar substrate. The pore size distribution of the experimental mortar substrate and of the blank dried poultices were preliminarily accomplished by mercury intrusion porosimetry (MIP). Desalination tests were carried out on specifically-formulated mortars after capillary absorption of Na2SO4 0.3 M solution. The efficiency of salt extraction was measured by means of electrical conductivity meter and ion chromatography. Among the test…
Analysis-oriented stress–strain model of CRFP-confined circular concrete columns with applied preload
2018
The compressive behavior of FRP-confined concrete is a current issue in the field of structural retrofitting. The available models well predict the stress–strain behavior under monotonic and cyclic loads. However, in the practical applications, columns that need an increasing of bearing capacity are often strengthened under serviceability load conditions, with a stress and strain state that could change the response of the reinforced systems with respect to the case of the unloaded state. In this paper, the compressive behavior of circular FRP-confined concrete columns with preload is analyzed with the introduction of a modified analysis-oriented model. Differently from the classical formul…
Investigation on Application of Basalt Materials as Reinforcement for Flexural Elements of Concrete Bridges
2015
Basalt polymers are rather new materials for civil engineering; therefore, identification of peculiarities and limitations of application of such polymers in concrete structures (particularly bridges) is of vital importance. This paper experimentally investigates deformation behaviour and cracking of flexural elements, which are predominant parameters governing serviceability of the bridges. Unlike a common practice, the present study is not limited by the analysis of concrete beams reinforced with the polymer bars; it also considers effectiveness of basalt fibre reinforced polymer sheets for repairing the beams. The analysis has revealed that a combination of the high strength and elastici…
Analytical prediction of the shear connection capacity in composite steel–concrete trussed beams
2016
Steel–concrete trussed composite beams are a particular types of composite girders constituted by a steel truss embedded in a concrete core. The truss is typically composed by a steel plate or a precast concrete slab working as bottom chord while coupled rebars are generally used to form the upper chord. Moreover, a system of ribbed or smooth steel rebars welded to the plate and forming the diagonals of the truss, works as web reinforcement. In the present study, the attention is focused on the evaluation of the shear resistance of the connection between bottom steel plate (the bottom chord) and concrete core through the diagonal bars of the truss developing a mechanical model able to accou…
Activity monitoring of a gaseous tritium source by beta induced X-ray spectrometry
2013
Abstract For monitoring and control of gaseous tritium sources in fuel circulation systems of fusion reactors beta induced X-ray spectrometry (BIXS) seems to be an applicable method. The characteristics of a BIXS monitoring setup built at TLK were examined. A low-noise silicon drift detector (SDD) was used together with two thin beryllium windows evaporated with gold films of 100 nm for efficient X-ray production. The measured X-ray intensity was proportional to the tritium partial pressure and the average detection efficiency was evaluated as 32.6 × 10−8 cps/Bq. A tritium memory effect was revealed. From the results it was concluded that such a monitoring system would be a useful complemen…
SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: Manufacturing, characterization, corrosion tests
2017
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
Effect of the loading rate on ultimate strength of composites. Application: Pressure vessel slow burst test
2013
International audience; The strength of unidirectional elastic fibre composites is shown to depend on the loading rate as the viscoelastic nature of the matrix results in a fall in breaking load as the rate is reduced. The simulation of the accumulation of fibre breaks leading to failure, takes into account all physical phenomena involved fibre failure, including the stochastic nature of fibre strength, stress transfer through the matrix between reinforcements, interfacial debonding and the viscoelastic nature of the matrix. The kinetics of composite failure are seen to involve the initial formation of random fibre breaks which at higher loads coalesce into clusters of broken fibres. The ra…
Steady state and transient thermal-hydraulic characterization of full-scale ITER divertor plasma facing components
2008
Abstract In the frame of the activities related to ITER divertor R&D, ENEA CR Brasimone was in charge by EFDA (European Fusion Development Agreement) to investigate the thermal-hydraulic behaviour of the full-scale divertor plasma facing components, i.e. the outer vertical target, the inner vertical target and the dome-liner, both in steady state and during draining and drying transient. The investigation was performed by means of both experimental test campaigns performed at ENEA CR Brasimone and theoretical simulation developed in RELAP5 Mod.3.3 environment at the Department of Nuclear Engineering of the University of Palermo (DIN). This paper presents the achieved experimental results fo…