Search results for " Tecnica"
showing 10 items of 2030 documents
Stiffness and strength of composite truss beam to R.C. column connection in MRFs
2015
Abstract The results of experimental and numerical investigations on the cyclic behavior of composite truss beam to reinforced concrete column connection of moment resisting frames are reported. The beams are constituted by a steel truss and end zone added rebar embedded within a concrete block cast in place, so that, after curing, the steel truss and the added rebar work together with the concrete matrix as reinforcement of the composite beam. Particularly, three specimens of two-span continuous beams were tested under monotonic and cyclic actions as three point bending test. With the goal to investigate about the behavior of the end zone of the beam integrated into a moment resisting fram…
The use of steel angles for the connection of laminated glass beams: Experiments and modelling
2012
Abstract In the present paper the experimental results relative to three-point bending tests on multilayer glass beams and on semi-rigid connections realised with stainless double web angles are presented and discussed. Small and medium size glass beams were tested and load–deflection curves and crack patterns at failure were recorded. The laminated glass specimens, of equal cross-section, were characterised by three different combinations of annealed float and fully thermally tempered glass plies and different interlayers. Steel joints constituted by double web angles to connect two glass beams were tested adopting several geometrical configurations and using stainless steel bolts preloade…
Assessment of bio-combustibles production via slow pyrolysis of wine industry residues
2018
With the aim of evaluating the potential production of high energy solid and liquid bio-fuels, a laboratory scale fixed bed reactor (FBR) derived from the standard Gray-King (GK) assay test on coal was used to carry out fixed bed pyrolysis experiments on wine industry by-products. The present study provides results on the pyrolysis of grape marc, residual from wine-making process, consisting of 50% by weight of grape seeds and 50% by weight of grape skins, at temperature between 150 and 500 °C, holding time of 30 minutes. Pyrolysis mass yields of solid (char) and liquid (tar) products and their corresponding energy properties, as a function of reaction temperature, are reported and discusse…
The coffee-house: Upcycling spent coffee grounds for the production of green geopolymeric architectural energy-saving products
2023
This study investigates a possible alternative reuse of spent coffee grounds (SCG), the major residue of the brewing process, to manufacture green geopolymeric materials for innovative building applications in energy-saving construction, in line with the European Green Deal towards zero-energy building. Specimens were prepared by a combination of biomass fly ash from the Kraft paper-pulp process, as raw material (70 wt%), and SCG (up to 17.5 %), as filler. The high amount of reused bio-wastes makes the material fit the requirements for the Minimum Environmental Criteria (MEC) certification, in light of the Circular Economy (CE) approach. Sustainability is also boosted by the manufacturing p…
Characterization of Biodiesel from Vegetable Oil Using Comprehensive Two-Dimensional Gas Chromatography
2013
Biodiesel from vegetable oils has been analyzed and its suitability for internal combustion engines has been assessed. The Standard biofuel’s characteristics have been investigated. Gas chromatography (GC) tests were carried out to characterize the fatty acid behavior. It was found that the mass percentage of saturated fatty acids did not change substantially with time, while unsaturated fatty acids increased with time for both B100 and B30. An increase in density for B100 and B30 with time was noted. Biodiesel density was within the standardization. The calorific values of biodiesel and its blend increased with time. Higher heating value for B100 increased from 41 to 43 MJ/kg while B30 inc…
Architectural technologies for life environment: biomaterials for an eco-efficient and sustainable architecture.
2020
Bio-based architecture (usually known as green architecture) is a new way of thinking, designing, and building according to innovative ethical, economic and social criteria, aimed at creating a partnership between innovation and low environmental impact. In fact, bio-architectural constructions contemplate the use of advanced materials, often of organic nature, and renewable energy resources. In this sense, it could be interpreted as a new architectural movement that tends to employ new materials essentially derived from natural elements: stone, such as lime, agricultural wastes, such as potato peel, straw, hemp, farming wastes, such as wool, etc.. Wide use is also given to the reuse of ind…
An Anthropometric Analysis of Seated and Standing People
2012
Thermal radiative exchanges of the human body with surrounding surfaces play an essential role in describing the thermal conditions of people in a given environment. Moreover, they could be induced by, among other causes, the presence of high intensity radiant sources, like lighting spots or infrared heating panels. This implies that a suitable set of radiation data related to human body anthropometry is required. This set of data mainly comprises the body surface area, the clothing area factor, the effective radiation area factor, and projected area factors. Several analytical or experimental methods may be utilized in order to compute these parameters. A detailed description of the most c…
Convolution-based ensemble learning algorithms to estimate the bond strength of the corroded reinforced concrete
2022
Reinforced concrete bond strength deterioration is one of the most serious problems in the construction industry. It is one of the most common factors impacting structural deterioration and the major cause of premature decadence of reinforced concrete structures. Therefore, developing an accurate model with the lowest variance and high reliability for the bond strength of corroded reinforced concrete is very important. The current work evaluates the efficiency of convolution-based ensemble learning algorithms. To address these issues, convolution-based ensemble learning models are developed using a database collected from the previous experimental studies of relative bond strength for corro…
Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions
2005
Experimental results of the local bond stress-slip relationship of reinforcing bars embedded in lightweight fiber reinforced concrete with expanded clay aggregates are presented. The effect of the following parameters were investigated: - dimension of specimens; - anchorage length; - percentages of hooked steel fibers; - geometrical ratio of transverse reinforcement; - confinement external transverse pressure. Prismatic specimens with deformed steel bars embedded for a fixed length equal to five and eight equivalent diameters were tested under both monotonic and cyclic reversal imposed displacements at the tip of the bars, in controlled displacement tests. The influence of the above mention…
Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns
2021
Abstract The use of reinforced concrete (RC) jacketing is a common technique for retrofitting existing RC columns with poor structural performances. Literature studies highlighted that the relative slip occurring at the interface between the new and the old concrete can affect substantially the flexibility and the strength of the retrofitted member. For this reason, several interface treatments are usually applied, aiming to induce a monolithic behaviour to the column. However, despite the commonness of RC jacketing, a limited number of studies investigated numerical modelling strategies for including these phenomena, especially with reference to the development of numerical models for desi…