Search results for " Toughness"
showing 10 items of 83 documents
Sub-micron structured Polymethyl Methacrylate/Acrylonitrile-Butadiene rubber blends obtained via gamma radiation induced “in situ” polymerisation
2004
The morphology and properties of PMMA/rubber blends, obtained through gamma radiation induced “in situ” polymerization of methyl methacrylate (MMA) in the presence of small quantities of an acrylonitrile–butadiene based rubber (ABN), are presented. Different systems have been obtained by irradiating at a fixed irradiation dose rate and temperature, varying the integrated dose. All the blends obtained were characterized with respect to their melt state and solid state dynamic-mechanical response and mechanical tensile properties. In particular, the effect on the blend properties of prolonging the irradiation time was investigated. Furthermore, a morphological characterization through atomic …
Interfacial fracture toughness of universal adhesive systems treated with an antioxidant
2017
Background Secondary caries, degradation of the dentin-resin interface and fracture of the restoration are the most common forms of failure. The aim of this study was to assess the interfacial fracture toughness of three different adhesive approaches and to compare their fracture toughness after surface treatment with antioxidant. Material and methods Seventy two dentin blocks with 3×4mm dimension and 3mm thickness were prepared and attached to precured 3×4×12mm composite blocks from both sides. Six adhesive groups (N=12), All-bond universal, Scotchbond universal and Clearfil SE bond with or without antioxidant treatment (Sodium Ascorbate 10% )were applied to dentin surfaces, a 160µ polyeth…
Thermodynamics and continuum fracture mechanics for nonlocal-elastic plastic materials
2002
Nonlocal elasticity is used as an improved elasticity model which engenders no crack-tip stress singularities and thus makes applicable the classical stress-based failure criteria. Considering nonlocal-elastic plastic materials exposed to softening by particle decohesion in a process surface and to subsequent surface separation by fracture, fracture mechanics is addressed within the framework of irreversible internal-variable thermodynamics in the hypothesis of small strains and arbitrary (but sufficiently regular) fracture surface (crack surface plus process surface). The state equations and the energy dissipation densities are derived for the bulk material and for the process surface, for…
Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension
2010
The presence of stress concentrations at holes and notches is known to reduce the strength of composite materials. Due to complexity of the damage processes at a stress raiser in a composite, different modeling approaches have been developed, ranging from empirical point and average stress criteria to involved damage mechanics or cohesive zone-based models of failure. Finite fracture mechanics approach with a coupled stress and energy failure criterion, recently developed and applied mainly to cracking in homogeneous isotropic materials, allows predicting the appearance and propagation of a crack using material strength and toughness characteristics obtained from independent tests. The pres…
MoSi2 laser cladding—a comparison between two experimental procedures: Mo–Si online combination and direct use of MoSi2
2001
International audience; There are very strong interests in developing low density advanced material systems for service at temperatures up to 1300°C. These materials should mainly have moderate fracture toughness at low and intermediate temperatures and should exhibit oxidation resistant behaviour. The intermetallic compound, MoSi2 has been considered to be an attractive candidate due to its melting point (2030°C) and excellent oxidation resistance at high temperatures. In this paper, we compare the results obtained with two different techniques for laser cladding, one using an online combination between Mo and Si powders, the second using direct injection of the MoSi2 powder.
High-Performance TiO2 Nanoparticle/DOPA-Polymer Composites
2014
Many natural materials are complex composites whose mechanical properties are often outstanding considering the weak constituents from which they are assembled. Nacre, made of inorganic (CaCO 3 ) and organic constituents, is a textbook example because of its strength and toughness, which are related to its hierarchical structure and its well-defi ned organic–inorganic interface. Emulating the construction principles of nacre using simple inorganic materials and polymers is essential for understanding how chemical composition and structure determine biomaterial functions. A hard multilayered nanocomposite is assembled based on alternating layers of TiO 2 nanoparticles and a 3-hydroxytyramine…
Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies
2014
The present work has investigated the fracture toughness of a model DGEBA epoxy system subject to Hidro-Thermal aging. A Photoelastic Stress Analysis technique has been implemented, showing the evolution of stresses arising throughout the water uptake process due to the non-uniform swelling of the material. Gravimetric and Dynamic Mechanical Thermal Analyses have further complemented the characterization, showing the onset of plasticization effects with aging. The correlation of all previous characterizations has allowed to conclude that an increase of KIC fracture toughness is obtained at the fully saturated condition. In particular Photoelasticity has also revealed the onset of relevant s…
Wear mechanisms and residual stresses in alumina-based laminated cutting tools
2005
Abstract The outstanding performances of the Al2O3 cutting tools in terms of potential cutting speed can lead to substantial economies in the machining of metallic materials. Nevertheless, their widespread use is limited by some drawbacks such as the tendency to edge chipping and to the propagation of microcracks, which can lead to premature failures. These shortcomings are due to the intrinsic low toughness of the ceramic material, which is in turn related to its characteristics non-metallic bonds. A well-recognised method of increasing the toughness of brittle materials is the introduction of surface compressive stresses, which can be obtained through a suitable lamination geometry of the…
Mode I translaminar fracture toughness of high performance laminated biocomposites reinforced by sisal fibers: Accurate measurement approach and lay-…
2022
Abstract The present work performs a systematic experimental analysis of the translaminar fracture behavior of high performance biocomposites constituted by green epoxy reinforced by sisal fibers, by varying the main influence parameters as fiber concentration and lay-up. Despite the corrective function properly introduced to take into account the anisotropy as well as the use of the equivalent crack length, the study shows that the LEFM does not give accurate estimations of the fracture toughness, because the extension of the near tip damaged zone is higher than the singular dominated one. Accurate estimations can be obtained instead by the proposed modified area method that takes into acc…
Interlaminar fracture toughness behavior of electron-beam cured carbon-fiber reinforced epoxy-resin composites
2013
The work describes the preparation and physical-mechanical characterization of unidirectional CFRP panels manufactured by an electron beam curing technique. Delamination fracture toughness in Mode I and II is investigated in order to evaluate the influence of fiber–matrix adhesion strength, matrix toughness and matrix crosslinking density as determined by the radiation curing process. A matrix system comprising a DGEBA epoxy monomer and an initiator of cationic polymerization have been used, with one batch of resin mixed with a PES monomer in order to enhance matrix toughness. Curing was achieved with a pulsed 10 MeV Electron Beam accelerator. Thermally cured composite systems have also bee…