Search results for " Tunnel"
showing 10 items of 477 documents
Take-off aerodynamics in ski jumping
2001
The effect of aerodynamic forces on the force-time characteristics of the simulated ski jumping take-off was examined in a wind tunnel. Vertical and horizontal ground reaction forces were recorded with a force plate installed under the wind tunnel floor. The jumpers performed take-offs in non-wind conditions and in various wind conditions (21-33 m s(-1)). EMGs of the important take-off muscles were recorded from one jumper. The dramatic decrease in take-off time found in all jumpers can be considered as the result of the influence of aerodynamic lift. The loss in impulse due to the shorter force production time with the same take-off force is compensated with the increase in lift force, res…
Experimental characterisation of the CIRA plasma wind tunnel SCIROCCO test section
2008
Abstract During the Validation Phase of the CIRA-PWT SCIROCCO Facility located at Capua (Italy), a test campaign has been carried out to verify the performances of the facility with the use of the two conical nozzle configurations “D” and “F” with exit diameters are, respectively of, 1150 and 1950 mm. For the first time the data results of the tests have been used to characterize the plasma flow in the test section of the facility. In particular, analytical relationships between the main thermo-fluid-dynamic parameters in the test section and the reservoir conditions of the facility have been found, and compared to the CFD prediction developed during the Design Phase of the facility. Very i…
Analysis of Air Cycle and Efficiency Evaluation for a Blast Freezing Tunnel Plant
2013
Air refrigerating systems offer a suitable alternative to vapour compression systems. Air can be used as working fluid in gas compression cycles for refrigeration, air conditioning and heat pump systems. This paper gives some results of theoretical investigation into improved air cycles for refrigeration systems and a comparison is made with their performances. The case-study relates to a dual purpose refrigerating plant. A blast freezing tunnel gives the coldest air stream and, in cascade, the air coming out from the tunnel is used in a channel network for feeding a lot of chilling cells. The case-study analysed indicates that there is a real possibility to build plants which will be equip…
Fire safety investigation for road tunnel ventilation systems – An overview
2014
Abstract In recent years, research activities about fire events in tunnel have received a significant impulse, especially after several accidents. The Computational Fluid Dynamic (CFD) has a fundamental role about. Researchers have spent resources on various topics involving numerical tools as the performance of a ventilation system, the influence of this on the air flow motion in the tunnel or the methods for fire schematization, fire-induced smoke characterization, turbulence models, etc. One of the main phenomena to consider for the safety when a fire occurs in a tunnel is the possibility of the fire-induced smoke to rise the tunnel (backlayering). A well-designed ventilation system shal…
Forces and flow structures evolution on a car body in a sudden crosswind
2014
A vehicle driver is commonly exposed to strong side air flows, for example when passing through a wind gust. The aerodynamic efforts generated in these situations may induce undesired lateral deviations, which can lead to dramatic effects, if the driver is surprised. In order to simulate a sudden yaw angle change on a moving vehicle, a double wind tunnel facility, adapted from the one of Ryan, Dominy, 2000. Wake Surveys Behind a Passenger Car Subjected to a Transient Cross-wind Gust. SAE Technical Paper No. 2000-01-0874 is developed. Two Windsor car body models, differing from their rear geometry, are analysed. The transient evolution of the side force and yaw moment aerodynamic coefficient…
Magnetic Tunnel Junction (MTJ) Sensors for Integrated Circuits (IC) Electric Current Measurement
2013
We report on MgO Magnetic Tunnel Junction (MTJ) devices focusing on their potential application in the measurement of electrical current at the integrated circuit level. Single devices and full bridges have been specifically developed for this purpose. A sort of different designs regarding their geometry arrangement as well as the number of constitutive elements have been tested. Experimental characterization has been performed and results including impedance and sensitivity measurements are given.
SmartARP: merging IP and MAC addressing for low-cost gigabit Ethernet networks
1999
Abstract Address Resolution Protocol (ARP) is one of the key TCP/IP stack protocols, used on LANs to map 32 bit IP addresses into 48 bit hardware addresses. Regular ARP uses MAC layer broadcasts to perform the mapping. In this paper a new server-based ARP extension (smartARP) is proposed, which allows the extension of ARP functionality beyond a single MAC layer broadcast domain. Compared to regular IP router, smartARP together with simple broadcast-filtering switches presents a low-cost alternative for forwarding packets between MAC layer broadcast domains. SmartARP is transparent to existing IP hosts, operates independent of LAN speed, and scales for big networks.
ZERO: An Efficient Ethernet-Over-IP Tunneling Protocol
2013
An Ethernet over IPv4 tunneling protocol is proposed, which categorizes all Ethernet frames to be tunneled into NICE and UGLY frames. The UGLY frames are tunneled by traditional methods, such as UDP or GRE encapsulation, resulting in substantial overhead due to additional headers and fragmentation usually required to transport long Ethernet frames over IP network typically limited to MTU=1,500 bytes. Meanwhile the NICE Ethernet frames are tunneled without any overhead as plain IPv4 packets due to non-traditional reuse of “fragment offset” or “identification” field in the IP header. It is shown that for typical Internet traffic transported over Ethernet, the proposed ZERO tunneling protocol …
The efficacy of single suture for exit site wound closure and stabilization of hemodialysis central tunneled catheter
2021
Introduction: The majority of the end-stage renal disease patients begin hemodialysis with the central tunneled catheter as a permanent or bridge vascular access. The procedure of central tunneled catheter insertion can be complicated by exit site bleeding, prolonged tunnel healing, and infection. The study aimed at evaluating whether the catheter exit site wound closing with a single-suture method is equally effective as the double suture method, which is most frequently applied. The assumption was that the single-suture method, which is less traumatizing for the skin, could offer an advantage for the patients with “paper” skin, that is, elderly, after long-term immunosuppressive treatment…
Defects, Disorder, and Strong Electron Correlations in Orbital Degenerate, Doped Mott Insulators.
2015
We elucidate the effects of defect disorder and $e$-$e$ interaction on the spectral density of the defect states emerging in the Mott-Hubbard gap of doped transition-metal oxides, such as Y$_{1-x}$Ca$_{x}$VO$_{3}$. A soft gap of kinetic origin develops in the defect band and survives defect disorder for $e$-$e$ interaction strengths comparable to the defect potential and hopping integral values above a doping dependent threshold, otherwise only a pseudogap persists. These two regimes naturally emerge in the statistical distribution of gaps among different defect realizations, which turns out to be of Weibull type. Its shape parameter $k$ determines the exponent of the power-law dependence o…