Search results for " aluminum"

Laser irradiation of ZnO:Al/Ag/ZnO:Al multilayers for electrical isolation in thin film photovoltaics

2013

Laser irradiation of ZnO:Al/Ag/ZnO:Al transparent contacts is investigated for segmentation purposes. The quality of the irradiated areas has been experimentally evaluated by separation resistance measurements, and the results are complemented with a thermal model used for numerical simulations of the laser process. The presence of the Ag interlayer plays two key effects on the laser scribing process by increasing the maximum temperature reached in the structure and accelerating the cool down process. These evidences can promote the use of ultra-thin ZnO:Al/ Ag/ZnO:Al electrode in large-area products, such as for solar modules. © 2013 Crupi et al.; licensee Springer.

Numerical investigation on dissimilar Friction Stir Welding of Aluminum and Magnesium sheets

2014

Preparation and characterization of Ce:YAG-PMMA and Ce:YAG-PC composites for white LED

2015

Polymeric composites of lanthanide-doped materials were considered as potential candidates for the development of white LED. Ce:YAG-PMMA and Ce:YAG-PC composites were prepared by melt compounding. The characterization was performed using transmission electron microscopy, X-ray diffractometry, thermogravimetry and photoluminescence spectroscopy. The effect of filler quantity, in the range 0.1-5 wt.%, on the morphology, optical and thermal properties was investigated.

Surface investigation and aluminum oxide estimation on test filters for the ATHENA X-IFU and WFI detectors

2016

The ATHENA mission provides the demanded capabilities to address the ESA science theme "Hot and Energetic Universe". Two complementary instruments are foreseen: the X-IFU (X-ray Integral Field Unit) and WFI (Wide Field Imager). Both the instruments require filters to avoid that the IR radiation heats the X-IFU cryogenic detector and to protect the WFI detector from UV photons. Previous experience on XMM filters recommends to employ bilayer membrane consisting of aluminum deposited on polyimide. In this work, we use the X-ray Photoelectron Spectroscopy (XPS) to quantify the native aluminum oxide thickness that affects the spectral properties of the filter. The estimation of the oxide thickne…

An Innovative Friction Stir Welding Based Technique to Produce Dissimilar Light Alloys to Thermoplastic Matrix Composite Joints

2016

Abstract Aluminum sheets can be joined to composite materials with different techniques. Each of them has advantages and weak points over the others. In literature, new techniques and patents are continuously developed to overcome these difficulties. In the paper a new Friction Stir Welding based approach is proposed to mechanically join AA6082-T6 to self-reinforced polypropylene. The aluminum sheet is pre-holed along both the sides of the weld line. A pinless tool generates the heat and pressure needed to activate back-extrusion of the composite. Joints have been produced with varying hole diameter and pitch. The mechanical resistance of the joint has been evaluated and the different failu…

Design and development of a new machine tool for continuous friction stir extrusion

2023

In the present paper the Continuous Friction Stir Extrusion process (CFSE), derived from the already known Friction Stir Extrusion (FSE), is proposed for effective solid-state recycling of metal scraps. A new dedicated machine tool was designed and developed. A Lagrangian implicit thermomechanical numerical model was set up and used to determine the proper ranges of the most relevant process parameters. An effective case study is proposed, involving the actual extrusion of a recycled wire in a continuous way. Metallurgical observations and mechanical characterization tests were carried out on the obtained specimen showing the potential of the process and its industrial feasibility.(c) 2023 …

RESHAPING AS NOVEL CIRCULAR ECONOMY STRATEGY FOR SHEET METAL BASED END-OF-LIFE COMPONENTS

2022

Making materials consumes about 21% of the global energy demand a specifically metals production, it accounts for about 8% of total global energy consumption. In fact, in the past few decades, the use of lightweight alloys has become increasingly widespread in many major industrial sectors thanks to the weight reduction associated with their applications. Most lightweight materials like aluminum alloys are characterized by high-energy demands primary production cycles that are responsible for a relevant share of the global CO2 emissions. Circular economy strategies such us longer life, more intense use, repair, product upgrades, modularity, remanufacturing, component re-use and open/closed …

Phenoxyamidine Zn and Al Complexes: Synthesis, Characterization, and Use in the Ring-Opening Polymerization of Lactide

2019

International audience; Herein we report the synthesis of new ditopic ligands, which consist of a phenoxy group and N,N,N'trisubstituted amidines linked by a methylene spacer (L1-L4). Their coordination chemistry has been studied/investigated with Zn(II) and Al(III). Alkane elimination route between the phenol-amidine proligands (L1H-L4H) and Et2Zn led to dinuclear complexes [(L1-L4)ZnEt]2 (1a-4a) in which the Zn centers are chelated by phenoxyamidine ligands and bridged through the oxygen atom of the phenoxy groups. Salt metathesis reaction between two equivalents of the sodium amidine phenate L1Na and ZnCl2 led to a bis-chelate chiral spiro-complex (L12Zn) 1a'. Analogous alkane eliminatio…

A Comparison of Mechanical Properties and Microstructure in Friction Stir Welded and MIG Welded Light Alloys

2012

Joining technologies are in a very interesting phase today due to some relevant innovations concerning new techniques. Friction Stir Welding (FSW) is a relatively new process, patented by TWI in 1991, able to weld through a solid state bonding materials considered difficult to be welded or unweldable by more traditional fusion welding techniques. By using this process welded joints are obtained with no external heat supplier, generating the required temperature increase by means of a revolving pin that follows a proper trajectory partially sunk in the workpiece surface. As for today, although first examples of industrial application can be found in the aeronautical and aerospace fields, the…

Etude de l'influence de l'hydratation des laitiers sur les propriétés de transfert gazeux dans les matériaux cimentaires

2015

Cements with high slag content are currently studied as possible candidate for nuclear waste containment materials. In this context it is important to know their microstructure and the transport properties (permeability and diffusion) of the gases that are formed by the radiolysis of the water present in this material. According to literature, these properties are strongly impacted by the addition of blast furnace slag. The aim of this work is to correlate the hydration processes of slag blended cements with their transport properties. In the first part of this work, the hydration of the slag blended cements, for which only few results have been reported to date, has been studied. Silicon-2…