Search results for " ceramic"

Toward high performance renewable agave reinforced biocomposites: Optimization of fiber performance and fiber-matrix adhesion analysis

2017

Abstract The increasing sensitivity toward the environmental pollution and the recent laws on the environmental protection, have led to an increasing attention to the so called biocomposites, i.e. to ecofriendly or renewable composite materials, obtained from biopolymers reinforced by natural fibers. Although the contribution of various works reported in literature, focused on biocomposites reinforced by agave fibers, such materials are still exclusively used in the automotive industry for non-structural applications, and the implementation of high performance biocomposites for semi-structural and structural applications, is an expected, but not yet reached objective. Therefore, the present…

Salt-fog spray aging of jute-basalt reinforced hybrid structures. Flexural and low velocity impact response

2017

Abstract In this work, a study on the aging resistance of jute and jute-basalt interply hybrid laminates exposed to salt-fog is presented with the aim to investigate the possibility to enhance the durability of natural fiber reinforced composites for marine application by a ply-substitution approach. In particular, jute and basalt/jute reinforced composite plates were manufactured by vacuum assisted resin infusion in two different staking sequences (i.e., intercalated and sandwich-like basalt-jute) and aged under salt fog conditions. The effects of the accelerated aging at increasing times on the mechanical response of laminates were assessed in both quasi static (three point bending) and d…

Microanalytical characterization of decorations in handmade ancient floor tiles using inductively coupled plasma optical emission spectrometry (ICP-O…

2013

In this study a total of 114 glazed decorations of 42 ceramic floor tiles, manufactured in Sicily fromthe 16th to 19 the 21th AD, were investigated. The micro sampling method, proposed by us, using a cotton swab soaked in hydrofluoric acid, includes advantages of high sensitivity, high selectivity, simplicity, speed, not expensive and can be considered non-destructive because the point of sampling remains invisible to the human eye. ICP-OES technique was used in this study. Twenty-four elements (Al, As, B, Be, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Ni, Pb, Sb, Se, Si, Sn, Ti, V and Zn) were determined in each colored enamel. Enameled decorations in Sicilian tiles were varied in tones an…

Ceramic Raw Materials

2016

Any ceramic object represents the result of a well-structured production chain starting with the localization and the exploitation of a suitable raw material and ending with the artisanship and craftsmanship of the potter. The study of ceramic raw materials has been increasingly regarded in archaeometric research as the best starting point for identifying local paste recipes for pottery diachronically produced in any historical period. The classification of a ceramic paste and its assignment to a production center can be established more easily when ceramic sherds, kiln wasters, and raw material are studied in combination. The reconstruction of the “production chain” should facilitate the s…

Bond strength of metal-ceramic systems in three-point flexure bond test

1995

This study deals with a three-point flexure test for the metal-ceramic bond involving geometrically simple specimens (alloy strips partly coated with ceramic) that can be fabricated with reasonable expenditure and sufficient reproducibility. The calculation of the stress distribution in such specimens with the aid of the finite-element method (FEM) is presented. The aim of this numerical analysis is: to investigate the stress distribution in a ceramometallic specimen with dimensions that, in a large number of experiments, have proven to lead to debonding at one end of the ceramic veneer instead of a crack in the middle of the veneer; and to assign a bond strength to the measured critical be…

Revival neoclassico e ideali risorgimentali nel programma decorativo della casa di un antiborbonico siciliano

2012

Lo scavo della Chiesa di Santa Maria Degli Angeli alla Gancia: indicatori archeologici della prima età islamica a Palermo

2014

Lo scavo in occasione del restauro della chiesa di Santa Maria degli Angeli alla Gancia a Palermo ha permesso di recuperare alcune stratigrafie affidabili relative alla prima età islamica a Palermo. Lo studio della ceramica ha restituito una serie di indicatori cronologici per il IX-X secolo nonché di proporre nuove cronologie per alcune classi di materiali. Relativamente alla storia della città questo scavo ha aggiunto alcune note importanti che riguardano il porto e la cittadella e mirale la al-Halisah.

Potes meleiros e colmenas em cerâmica: una tradicâo milenar

2006

Neste estudo apresenta-se uma breve resenha sobre a importância do mel na antiguidade e destaca-se a existência de contentores destinados ao seu armazenamento. Tendo em conta a maior antiguidade destes contentores recolhidos na Península (datáveis, pelo menos, a partir de c. de 600 a.C.), a sua persitência ao longo dos tempos, e a existência de paralelos etnográficos ainda hoje documentados, admitimos tratar-se de uma tradicâo com origem da Península.Destaca-se, ainda, a importância dos mellaria na economia do mundo antigo e realça-se a identificacâo de colmeias em cerâmica na regiao de Valência e de uma inédita recolhida em Bracara Augusta, uma cidade romana localizada no extremo ocidente …

Compositional and Optical Gradient in Films of PbZrxTi1-xO3 (PZT) Family

2011

Pb(ZrxTi1-x)O3 (PZT) (x = 0-1) films have attracted the attention of researchers for the past 30 years due to their excellent ferroelectric (FE) and electromechanical properties, which have led to the commercialization of thin PZT films for ferroelectric random access memory (FeRAM), forming a market of several millions USD annually. Ferroelectricity of perovskite oxide thin films, especially PZT thin films, can be exploited in semiconductor devices to achieve non-volatile random access memory (NVRAM) with high-speed access and long endurance, which can overcome the barriers, encountered in current semiconductor memory technologies. The ferroelectricity can be also exploited to voltage depe…

Bioactivity of bioceramic materials used in the dentin-pulp complex therapy : a systematic review

2019

Este es el artículo que se ha publicado de forma definitiva en: https://www.mdpi.com/1996-1944/12/7/1015 Dentistry-applied bioceramic materials are ceramic materials that are categorized asbioinert, bioactive and biodegradable. They share a common characteristic of being specificallydesigned to fulfil their function; they are able to act as root canal sealers, cements, root repair or fillingmaterials. Bioactivity is only attributed to those materials which are capable of inducing a desiredtissue response from the host. The aim of this study is to present a systematic review of availableliterature investigating bioactivity of dentistry-applied bioceramic materials towards dental pulp stemcel…