Search results for " composite material"
showing 10 items of 33 documents
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
Accceleration of Fatigue Tests of Polymer Composite Materials by Using High-Frequency Loadings
2004
The possibility of using high-frequency loading in fatigue tests of polymer composite materials is discussed. A review of studies on the use of high-frequency loading of organic-, carbon-, and glass-fiber-reinforced plastics is presented. The results obtained are compared with those found in conventional low-frequency loadings. A rig for fatigue tests of rigid materials at loading frequencies to 500 Hz is described, and results for an LM-L1 unidirectional glass-fiber plastic in loadings with frequencies of 17 and 400 Hz are given. These results confirm that it is possible to accelerate the fatigue testing of polymer composite materials by considerably increasing the loading frequency. The n…
Longitudinal Flexure as a Method for Determining the Flexural Strength of Composite Materials
2004
A method is presented for determining the flexural strength of composites from tests on pinned specimens in axial compression. This scheme is close to the so-called Euler buckling model, but the load is applied eccentrically, and the bar is bent practically from the beginning of loading. An analytical model is proposed for calculating the flexural stress in longitudinal flexure of a thin bar in the case of large displacements. The problem is solved in elliptic integrals of the first and second kinds. The analytical model shows an excellent agreement with experiments. The results obtained are compared with experimental tension data. A device is also designed for testing composite bars in lon…
Geometry and stacking sequence effect on composite spinnaker pole’s stiffness: experimental and numerical analysis
2006
Composite materials are widely employed in sailing sports, a possible application is for the mast pole or other sail poles. In the paper the attention is focused on the spinnaker poles mechanical performances; in particular the focus is on axial and ring compressive properties of three different carbon fibre/epoxy resin spinnaker poles, to investigate both the diameter and stacking sequence effect on the mechanical performance of the structure. Starting from the stacking sequence used in the production of a particular spinnaker pole, the effect of a lamina at 0- in the middle of wall thickness is investigated with the purpose to obtain a more stiff structure. Moreover to test the proposed s…
Quantifiable analysis of the failure of advanced carbon fibre composite structures leading to improved safety factors
2022
Abstract The increasing use of advanced composite materials means that they must now be considered as major materials for a wide variety of structures some of which will be in service for decades. There is therefore an important need to be able to quantify damage accumulation leading to failure in these materials particularly as they are often used in extreme situations for which failure must be avoided. This review shows how damage accumulation in many major composite structures is dominated by fibre failure but that the viscoelastic nature of the matrix induces time effects including delayed failure. It is shown that damage accumulation can be quantitatively modelled using a multi-scale a…
Manufacture of marine composite sandwich structures
2016
Abstract The aim of this chapter is to present the main processes of manufacture of composite sandwich structures used in marine applications. In the introduction, sandwich structure classification and properties and advantages/disadvantages in their uses are presented. In the second and third section, the main used technologies to made sandwich are, respectively, described and compared. Then, the goodness of these techniques is evidenced with the discussion of some experimental results obtained by the authors in their studies. The last section concludes with a thorough list of the future trends.
VIRTUAL ELEMENT METHOD FOR COMPUTATIONAL HOMOGENIZATIONS OF UNIDIRECTIONAL FIBER-REINFORCED COMPOSITE MATERIALS
2019
The Virtual Element Method (VEM) is a generalization of the Finite Element Method (FEM) for the treatment of general polygonal/polyhedral mesh elements. Despite its recent introduction, VEM has been applied to several problems in structural mechanics. Due to such capability of dealing with mesh elements of general shape and of naturally addressing the presence of hanging nodes, the VEM ensures a noticeable simplification in the data preparation stage of the analysis, allowing implementing a mesh generation process over complex multi-domain geometries in a fully automated way. Moreover, for the lowest order VEM used in this contribution,no numerical integration is required to compute the sys…
Ionizing radiation induced curing of epoxy resin for advanced composites matrices
2005
Abstract The radiation curing of an epoxy monomer in the presence of an iodonium salt, as photo initiator, is studied. Systems with different concentrations of photo initiators have been polymerized via both gamma rays and e-beam, at various dose rates. The aim of this work is to investigate how the photo initiator concentration and the irradiation dose rate affect the temperature of the systems during curing and how the different thermal histories influence the dynamic mechanical thermal properties of the obtained materials.
The influence of the processing temperature on gamma curing of epoxy resins for the production of advanced composites
2007
Abstract Gamma radiation curing of an epoxy monomer, in the presence of an iodonium salt, as initiator, is studied. Systems have been polymerized at the same irradiation dose and dose rate and at different processing temperatures. The experimental results show that all the irradiated materials exhibit a latent reactivity, undergoing toward an increase of crosslinking density if they are thermally cured after irradiation. The results indicate that the processing temperature affects both the crosslinking density after irradiation and the sensibility to the post-irradiation thermal treatment.