Search results for " density"
showing 10 items of 2709 documents
Heat and mass transfer analysis in single cell of PEFC using different PEM and GDL at higher temperature
2019
Abstract According to the H2 and fuel cell road map in Japan, the target operating temperature of polymer electrolyte fuel cell (PEFC) should be 90 °C from 2020 to 2025. In this study, the impact of polymer electrolyte membrane (PEM) and gas diffusion layer (GDL)'s thickness on heat and mass transfer characteristics as well as power generation performance of PEFC is investigated at operating temperature of 90 °C. The in-plane temperature distributions on anode and cathode separator are also measured using thermograph. As a result, it is observed that the increase in power from 1 W to 5 W at the current density of 0.80 A/cm2 as well as even temperature distribution within 1 °C can be obtaine…
Low Current Density Driving Leads to Efficient, Bright and Stable Green Electroluminescence
2013
Electroluminescent devices have the potential to reshape lighting and display technologies by providing low-energy consuming solutions with great aesthetic features, such as flexibility and transparency. In particular, light-emitting electrochemical cells (LECs) are among the simplest electro-luminescent devices. The device operates with air-stable materials and the active layer can be resumed to an ionic phosphorescent emitter. As a consequence, LECs can be assembled using solution-process technologies, which could allow for low-cost and large-area lighting applications in the future. High efficiencies have been reported at rather low luminances (<50 cd m(-2)) and at very low current densi…
Evaluation of the influence of light-curing units on the degree of conversion in depth of a bulk-fill resin.
2020
Background It is known that bulk-fill have been widely studied and used by dentists in the clinic. However, the use of light-curing units that do not have the ability to adequately light-cure these materials at the appropriate depth can affect their clinical performance. The aim of this study was evaluating the influence of 5 different light curing units (LCUs) on the degree of conversion (DC) of a bulk-fill resin at depths of 0 to 4 mm and determined the effect of using 20s exposure and 40s. Material and methods Cylinders of composite were made in a stainless steel matrix (n=10). The specimens were exposed from the top surface using 5 LCUs: Valo® Cordless (VA); Radii Plus (RA); Emitter.D (…
Transient Moiré rotation patterns in thin colloidal crystals
2010
A high resolution optical microscopy study on low salt charged sphere suspensions settling under gravity reveals the formation of AB-stacked triangular layers via different transient structures. In particular, metastable triangular Moire rotation patterns (formally corresponding to 1 × 1 Rα super structures) with rotation angles α = 27.8° and α = 38.2° are identified.
Real-space imaging with pattern recognition of a ligand-protected Ag374 nanocluster at sub-molecular resolution
2018
High-resolution real-space imaging of nanoparticle surfaces is desirable for better understanding of surface composition and morphology, molecular interactions at the surface, and nanoparticle chemical functionality in its environment. However, achieving molecular or sub-molecular resolution has proven to be very challenging, due to highly curved nanoparticle surfaces and often insufficient knowledge of the monolayer composition. Here, we demonstrate sub-molecular resolution in scanning tunneling microscopy imaging of thiol monolayer of a 5 nm nanoparticle Ag374 protected by tert-butyl benzene thiol. The experimental data is confirmed by comparisons through a pattern recognition algorithm t…
An automated procedure for computing the packing properties of dense and locked sands by image analysis of thin sections
2014
The macroscopic mechanical behaviour of dense sands originates to a great extent from their microstructural characteristics such as the coordination number, the grain contact and the packing density indexes. The study of intergranular contacts and the reckoning of these indexes may be carried out on planar images of the grains either by means of time-consuming visual inspection assisted by CAD or by automatic image analysis. An innovative method for the automatic determination of microstructural characteristics of sands based on image analysis of thin section is proposed. Tests performed on a locked sand show that the proposed method is much more effective, convenient and faster than the us…
Mechanism of large oscillations of anodic potential during anodization of silicon in H3PO4/HF solutions
2000
Abstract Effect of large oscillations of electrical potential during anodic polarization of silicon in electrolytes composed of phosphoric and hydrofluoric acids has been reported. The oscillations last hours without damping if experimental conditions are optimal. Changes of temperature, anodic current density, intensity of stirring, etc. quench them or convert into less periodic ones. The oscillations are of very high amplitude (typically 15 V) with a period ranging from 18 to 30 s. Scanning electron microscopy (SEM)-imaging of the samples experiencing the oscillatory kinetic behaviour shows unambiguously that the stage of the anodic voltage growth is assisted by the formation of a thin (5…
Metalenses with high-NA, enhanced resolution and apodization
2017
Dielectric microlenses employed in imaging and focusing for optoelectronics are currently prospects to be substituted by metalenses showing an extraordinary optical performance within notably reduced volumes. Here we present some proposals to achieve an enhanced resolution in metallodielectric metasurface-based lenses established on either efficient arrangements with high numerical aperture or spatial filtering enabling to surpass the limit of resolution derived by the Rayleigh criterion.
A combination magnetic plus Si(Li)-Si(Li) sum-coincidence technique for in-beam studies of internal pair transitions
1979
Abstract An intermediate-image magnetic plus Si(Li) combination pair spectrometer featuring an excellent energy resolution and a pair-line efficiency of 10 −3 , recently presented and demonstrated, has been made more universally applicable by reducing the background underlying the pair lines. The best background reduction is achieved by using two standard Si(Li) detectors and a sum-coincidence method. An experimental coincidence pair-line efficiency of 2.1 × 10 −4 for the 1911 keV E0 pair line in 64 Zn is achieved. In this typical case, the high-energy background (mainly caused by β + activity) is reduced by a factor of about 200 as compared with the direct spectrum of a single detector.
Calculation of the elastic–plastic strain energy density under cyclic and random loading
2001
Abstract The paper presents a method of identification and calculation of the components of strain energy density under cyclic and random loading causing elastic–plastic strain in the material. The method consists in integration of the history of the strain instantaneous power.