Search results for " electronic engineering"
showing 10 items of 8284 documents
Ferromagnetic gyroscopes for tests of fundamental physics
2020
A ferromagnetic gyroscope (FG) is a ferromagnet whose angular momentum is dominated by electron spin polarization and that will precess under the action of an external torque, such as that due to a magnetic field. Here we model and analyze FG dynamics and sensitivity, focusing on practical schemes for experimental realization. In the case of a freely floating FG, we model the transition from dynamics dominated by libration in relatively high externally applied magnetic fields, to those dominated by precession at relatively low applied fields. Measurement of the libration frequency enables in situ measurement of the magnetic field and a technique to reduce the field below the threshold for w…
Photoelectrochemical evidence of nitrogen incorporation during anodizing sputtering--deposited Al-Ta alloys.
2015
Anodic films were grown to 20 V on sputtering-deposited Al–Ta alloys in ammonium biborate and borate buffer solutions. According to glow discharge optical emission spectroscopy, anodizing in ammonium containing solution leads to the formation of N containing anodic layers. Impedance measurements did not evidence significant differences between the dielectric properties of the anodic films as a function of the anodizing electrolyte. Photoelectrochemical investigation allowed evidencing that N incorporation induces a red-shift in the light absorption threshold of the films due to the formation of allowed localized states inside their mobility gap. The estimated Fowler threshold for the intern…
Extraordinary tuning of a nanocavity by a near-field probe
2011
Abstract We report here an experimental observation of an extraordinary near-field interaction between a local probe and a small-volume solid-state nanocavity. We directly compare the normally observed near-field interaction regime driven by the perturbation theory and then report the extraordinary interaction regime. Subsequently, we show that the cavity can take up to 2 min to recover from this interaction after removing the probe and that leads to an extraordinary blue-shift of the cavity resonance wavelength (∼15 nm) which depends on the probe motion above the cavity and not the position. The reasons for this effect are not fully understood yet but we try to give some explanations.
An environment based approach for the ant colony convergence
2020
Abstract Ant colony optimization (ACO) algorithms are a bio inspired solutions which have been very successful in combinatorial problem solving, also known as NP-hard problems, including transportation system optimization. As opposed to exact methods, which could give the best results of a tested problem, this meta-heuristics is based on the stochastic logic but not on theoretical mathematics demonstration (or only on certain well defined applications). According to this, the weak point of this meta-heuristics is his convergence, its termination condition. We can finds many different termination criteria in the scientific literature, yet most of them are costly in resources and unsuitable f…
Electromagnetic Sensitivity Analysis and Shape Optimization Using Method of Moments and Automatic Differentiation
2009
Sensitivity analysis is an important part of gradient-based optimization of electromagnetic devices. We demonstrate how sensitivity analysis can be incorporated into an existing in-house method of moments solver with a relatively small amount of labor by using a technique called automatic differentiation (AD). This approach enables us to obtain (geometrical) sensitivities of the discrete solution with accuracy up to numerical precision. We compare the assembly time and memory usage of the modified and original solvers. Moreover, we optimize the shape of a dipole antenna and the dimensions of a Yagi-Uda array using the presented AD technique, traditional response level finite difference sens…
Anthracene-containing PPE-PPV copolymers: Effect of side-chain nature and length on photophysical and photovoltaic properties
2009
Rupali Jadhav1,2, Stefan Turk3, Florian Kuhnlenz1, Vera Cimrova4, Silke Rathgeber5, Daniel A. M. Egbe*,2,3, and Harald Hoppe**,1 1 Institute of Physics, Ilmenau University of Technology, Weimarer Str. 32, 98693 Ilmenau, Germany 2 Linz Institute for Organic Solar Cells (LIOS), Johannes Kepler University Linz, Altenbergerstr. 69, 4040 Linz, Austria 3 Institute for Print and Media Technology, Chemnitz University of Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany 4 Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovský Sq. 2, 162 06 Prague 6, Czech Republic 5 Johannes Gutenberg-University Mainz, Staudingerweg 7, 55128 Mainz, Germany
The cryogenic anticoincidence detector for ATHENA-XMS: preliminary results from the new prototype
2012
ATHENA has been the re-scoped IXO mission, and one of the foreseen focal plane instrument was the X-ray Microcalorimeter Spectrometer (XMS) working in the energy range 0.3-10 keV, which was a kilo-pixel array based on TES (Transition Edge Sensor) detectors. The need of an anticoincidence (AC) detector is legitimated by the results performed with GEANT4 simulations about the impact of the non x-ray background onto XMS at L2 orbit (REQ. < 0.02 cts/cm2/s/keV). Our consortium has both developed and tested several samples, with increasing area, in order to match the large area of the XMS (64 mm2). Here we show the preliminary results from the last prototype. The results achieved in this work off…
Life Cycle Assessment of an Ambitious Renovation of a Norwegian Apartment Building to nZEB Standard
2018
Author's accepted manuscript. The upgrading of building infrastructure to modern standards represents a key tool for reducing global energy demand and emissions from buildings. In Norway, building upgrades have been prioritized despite the relatively low carbon intensity of the Norwegian energy mix through various incentive programs and continual improvement in building standards. Prioritizing upgrades is important as up to 90% of the existing Norwegian building stock is expected to remain standing by the year 2050. The overall impact of upgrading buildings is expected to be a net benefit to the environment but this is primarily in operation, and many studies on energy do not include the ma…
Comparison of two different devices to assess intraocular lenses
2016
[EN] In this paper, we have compared the performance of two commercial systems, Kaleo-I and IOLA Plus, in the characterization of monofocal intraocular lenses (IOLs) according to the International Standard requirements (ISO 11979-2). The dioptric power (DP) and the Modulation Transfer Function (MTF) at 100.1p/mm and 3.0 mm aperture have been measured with both instruments in twenty commercial monofocal HEMA IOLs and their agreement was assessed by Bland Altman analysis. Compared with the designed power, IOLA Plus gave lower values in 85% of measures: Kaleo I errors are dependent on the power of the lens: measurements were higher than the designed power in the low-medium power range and lowe…
Lensless object scanning holography for two-dimensional mirror-like and diffuse reflective objects
2013
Recently proposed lensless object scanning holography (LOSH) [Opt. Express 20, 9382 (2012)] is a fully lensless method capable of improving the image quality in digital Fourier holography applied to one-dimensional (1D) reflective objects and it involves a very simplified experimental setup. LOSH is based on the recording and digital postprocessing of a set of digital lensless Fourier transform holograms, which finally results in a synthetic image with improved resolution, field-of-view (FOV), signal-to-noise ratio (SNR), and depth of field. In this paper, LOSH is extended to the cases of two-dimensional (2D) mirror-like and 1D diffuse-based objects. For 2D mirror-like objects, the experime…