Search results for " element"

Fast Hierarchical Boundary Element Method for Large Scale 3-D Elastic Problems

2010

This chapter reviews recent developments in the strategies for the fast solution of boundary element systems of equations for large scale 3D elastic problems. Both isotropic and anisotropic materials as well as cracked and uncracked solids are considered. The focus is on the combined use the hierarchical representation of the boundary element collocation matrix and iterative solution procedures. The hierarchical representation of the collocation matrix is built starting from the generation of the cluster and block trees that take into account the nature of the considered problem, i.e. the possible presence of a crack. Low rank blocks are generated through adaptive cross approximation (ACA) …

Structural Health Monitoring of delaminated composite structures by the Boundary Element method

2012

Structural Health Monitoring (SHM) for composite materials is becoming a primary task due to their extended use in safety critical applications. Different methods, based on the use of piezoelectric transducers, strain memory alloys as well as of fibre optics, has been successfully proposed to detect and monitor damage in composite structural components with particular attention focused on delamination cracks. In the present paper a Structural Health Monitoring model based on the use of piezoelectric sensors, already proposed by the authors for isotropic damaged components, is extended to delaminated composite structures. The dynamic behavior of the host damaged structure and the bonded piez…

A HYBRID VEM/BEM NUMERICAL TECHNIQUE FOR SIMULATING DAMAGE IN COMPOSITE MATERIALS

2021

Composite materials are nowadays widely used in the aerospace sector both for primary and secondary structures for their high mechanical properties and the ability to model them according to project needs. Therefore, accurately predicting material behaviour when subjected to operating loads is extremely important in making the design process more efficient. For this purpose, computational approaches based on continuum damage mechanics have been largely used to study the progressive loss of material integrity due to the propagation and coalescence of microscopic defects. In this contribution, a recently developed hybrid computational technique, which combines the Virtual Element Method (VEM)…

Coupling BEM and VEM for the Analysis of Composite Materials with Damage

2021

Numerical tools which are able to predict and explain the initiation and propagation of damage at the microscopic level in heterogeneous materials are of high interest for the analysis and design of modern materials. In this contribution, we report the application of a recently developed numerical scheme based on the coupling between the Virtual Element Method (VEM) and the Boundary Element Method (BEM) within the framework of continuum damage mechanics (CDM) to analyze the progressive loss of material integrity in heterogeneous materials with complex microstructures. VEM is a novel numerical technique that, allowing the use of general polygonal mesh elements, assures conspicuous simplific…

Application of dual boundary element method in active sensing

2013

In this paper, a boundary element method (BEM) for the dynamic analysis of 3D solid structures with bonded piezoelectric transducers is presented. The host structure is modelled with BEM and the piezoelectric transducers are formulated using a 3D semi-analytical finite element approach. The elastodynamic analysis of the entire structure is carried out in Laplace domain and the response in time domain is obtained by inverse Laplace transform. The BEM is validated against established finite element method (FEM).

An investigation of thermal behaviour of brake disk pad assembly with Ansys

2021

Abstract The brake disk is a key part of the braking mechanism, the task of it is to slow or stop the vehicle's wheels, on the one side, while the heat produced during the process is dissipated. In this regard, the brake pads are pressed by mechanical strength on the surface of the brake disks. This study aims to develop a model of a disk brake by use of CATIA V5, on the model, finite element analysis (FEA) done by ANSYS 19 then compare it to the findings gained by the original tests. A computational thermo-mechanical study was conducted on this research by use of ANSYS software for disk brake mounting inside a hydraulic brake system. This study is designed to provide insight into the heat …

Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns

2021

Abstract The use of reinforced concrete (RC) jacketing is a common technique for retrofitting existing RC columns with poor structural performances. Literature studies highlighted that the relative slip occurring at the interface between the new and the old concrete can affect substantially the flexibility and the strength of the retrofitted member. For this reason, several interface treatments are usually applied, aiming to induce a monolithic behaviour to the column. However, despite the commonness of RC jacketing, a limited number of studies investigated numerical modelling strategies for including these phenomena, especially with reference to the development of numerical models for desi…

Evaluation of saltwork ponds operation through brine characterization and geochemical modelling using PHREEQC code integrating the Pitzer correction

2021

Seawater represents a potential resource for the extraction of salts and raw materials [1]. About one-third of the global table-salt production is manufactured in solar saltworks [2], being the most representative product of seawater processing. However, other valuable compounds such as Magnesium, Lithium and trace elements belonging to the alkaline/alkaline-earth metals (e.g. Rb, Cs, Sr) and transition/post-transition metals (e.g. Co, Ga, Ge) are present. Many of these elements are included in the EU Critical Raw Materials (CRM) list, grouping natural assets classified as fundamental for the wealth of the socio-economic structure of Europe [3]. In saltworks, natural evaporation of seawater…

Bulk deposition at the industrial area of Gela (southern Sicily, Italy): preliminary results

2009

Cyclic AMP-mediated upregulation of the expression of neuronal NO synthase in human A673 neuroepithelioma cells results in a decrease in the level of…

2004

The expression level of neuronal nitric oxide synthase (nNOS) can vary depending on the (patho)physiological conditions. Here we document a marked induction of nNOS mRNA, protein, and total NO production in response to dibutyryl cyclic AMP (db-cAMP) in human A673 neuroepithelial cells. However, the upregulation of nNOS was associated with a decreased level of production of bioactive NO and by an increase in the level of generation of reactive oxygen species (ROS). ROS production could be prevented by the NOS inhibitor L-NAME, suggesting nNOS itself is involved in ROS generation. Sepiapterin supplementation of db-cAMP-treated A673 cells could restore full bioactive NO production, most likely…