Search results for " engineering"
showing 10 items of 38291 documents
Application of polydopamine functionalized zinc oxide for glucose biosensor design
2021
Zinc oxide (ZnO) nanostructures are widely used in optical sensors and biosensors. Functionalization of these nanostructures with polymers enables optical properties of ZnO to be tailored. Polydopamine (PDA) is a highly biocompatible polymer, which can be used as a versatile coating suitable for application in sensor and biosensor design. In this research, we have grown ZnO-based nanorods on the surface of ITO-modified glass-plated optically transparent electrodes (glass/ITO). Then the deposition of the PDA polymer layer on the surface of ZnO nanorods was performed from an aqueous PDA solution in such a way glass/ITO/ZnO-PDA structure was formed. The ZnO-PDA composite was characterized by S…
Raman Investigations to Identify Corallium rubrum in Iron Age Jewelry and Ornaments
2016
International audience; During the Central European Iron Age, more specifically between 600 and 100 BC, red precious corals (Corallium rubrum) became very popular in many regions, often associated with the so-called (early) Celts. Red corals are ideally suited to investigate several key questions of Iron Age research, like trade patterns or social and economic structures. While it is fairly easy to distinguish modern C. rubrum from bone, ivory or shells, archaeologists are confronted with ancient, hence altered, artifacts. Due to ageing processes, archaeological corals lose their intensive red color and shiny surface and can easily be confused with these other light colored materials. We pr…
Pro-Degradant Activity of Naturally Occurring Compounds on Polyethylene in Accelerate Weathering Conditions
2019
In this work, naturally occurring compounds, such as Vitamin E (VE) and Ferulic Acid (FA), at high concentrations, have been considered as pro-degradant agents for Low Density Polyethylene (PE). However, all obtained results using the naturally occurring molecules as pro-oxidant agents for PE have been compared with the results achieved using a classical pro-oxidant agent, such as calcium stearate (Ca stearate) and with neat PE. The preliminary characterization, through rheological, mechanical and thermal analysis, of the PE-based systems highlights that the used naturally occurring molecules are able to exert a slight plasticizing action on PE and subsequently the PE rigidity and crystalli…
RILEM TC 279 WMR round robin study on waste polyethylene modified bituminous binders: advantages and challenges
2022
inter-laboratory experiments were designed to evaluate the impact of plas- tic waste blended directly in bitumen and to assess the properties, using conventional and advanced bituminous binder testing. The blends tar- geted 5% of plastic waste in 95% bitumen, using two types of polyethy- lene (PE) primary (pellets) and secondary (shreds) waste. The experiments showed that the addition of PE waste to bitumen does not alter the chem- istry of the bitumen, the blending is physical. The DSR results indicate a strong dependency on the testing temperature as at low temperatures the composite material bitumen and PE behave both elastically whereas, at higher temperatures, the bitumen becomes visco…
Comparative Investigation on the Soil Burial Degradation Behaviour of Polymer Films for Agriculture before and after Photo-Oxidation
2020
Polymer films based on biodegradable polymers, polyethylene (PE) and modified PE with oxo-degradable additive were prepared by film blowing. Carbon black (1%) was added to all the films. Commercial biodegradable Ecovio®
The role of the matrix-filler affinity on morphology and properties of polyethylene/clay and polyethylene/ compatibilizer/clay nanocomposites drawn f…
2009
In this work the structural variations and mechanical performance of polyethylene/clay nanocomposite drawn fibres, also in the presence ofcompatibilizer, such as a commercial maleic anhydride grafted polyethylene, PEgMA, was studied. In the isotropic state both systems show intercalated morphology.After spinning and cold drawing, by adding the nanoparticles, the tensile strength as a function of the draw ratio increases and this rise is more pronounced for the filled compatibilized system. The reduction of the elongation at break, on the contrary, is about the same for all the examined samples. The orientation of the macromolecules, evaluated by measurements of the birefringence and calorim…
Competition between chain scission and branching formation in the processing of high-density polyethylene: effect of processing parameters and of sta…
2009
Two samples of high-density polyethylene with different molecular weight were processed in a batch mixer and the rheological and structural properties were investigated. In particular, the effect of different processing parameters and the eventual presence of different stabilizers were evaluated. Actually, two reactions may occur during processing: branching/crosslinking or chain scission. The results indicate that when the processing conditions promote a scarce mobility of the macromolecular chains (lower temperatures, lower mixing speed, and higher molecular weight), branching is more favored than chain scission. On increasing the mobility of the chain (higher temperature, higher mixing s…
On the effectiveness of different additives and concentrations on the re-building of the molecular structure of degraded polyethylene
2006
Mechanical recycling is an easy and economic way to re-use plastic waste as secondary materials, but, in general, their properties are worse with respect to the reclaimed materials and the virgin polymer. The aim of this work was to study the effect of concentration and reaction kinetics of two additives, an ethylene-co-glycidyl methacrylate (Lotader) and a hydroxylamine derivative (CGX), in the re-building of a degraded polyethylene. CGX is a nitroxyl radical generator able to form branching in polyolefins while the epoxy groups of Lotader can react with the functional groups present in the recycled polyethylene. The results indicate that the CGX has a higher reaction rate than Lotader, pr…
Effect of sample preparation on gel permeation chromatography results of determination of molecular weight of polyethylene obtained with using of zir…
2003
Molecular weights of polyethylene (PE) obtained with using of zirconocene catalyst activated with large excess of methylaluminoxane (MAO) were determined by gel permeation chromatography (GPC) method. It was found that repeatability of the measurements is strongly influenced by MAO remained in PE samples as well as time of sample keeping in the apparatus (dissolution + measurement time) at temp. 142 °C. A method of MAO removing from PE samples, before GPC measurement, based on additional washing of the sample with HF in methanol solution has been proposed. This modification leads to better both authenticity and repeatability of the results. Studies on the influence of time of sample keeping…
Influence of accelerated ageing conditions on the process of polyolefines degradation
2003
The process of polymers weathering and the methods of polymers weathering and accelerated ageing investigations were characterized. Accelerated ageing tests of polyethylene and polypropylene samples have been done in laboratory conditions. The ageing time (up to 400 h) influence, at various levels of ageing factors: UV radiation intensity (80—190 W/m2), temperature (35—55 °C) and humidity (30—90%), on the changes of the structures of polymers investigated (shares of carbonyl and olefinic groups from FT-IR spectra — Fig. 1, 2, 4 and 5), on the changes of polymers molecular weights (Fig. 3 and 6, Table 1) and on the changes of mechanical properties during tension (Table 1) has been investigat…