Search results for " fiber"
showing 10 items of 1776 documents
Influence of bundle porosity on shell-side hydrodynamics and mass transfer in regular fiber arrays: A computational study
2023
CFD predictions of the effects of a fiber bundle porosity on shell-side hydrodynamics and mass transfer under conditions of steady laminar flow were obtained. Fluid was assumed to flow around regular hexag-onal or square arrays of cylindrical fibers of different pitch to diameter ratios, yielding bundle porosities ranging from the theoretical minimum up to similar to 1. A large number of axial, transverse and mixed flow combinations were simulated by letting the axial and transverse flow Reynolds numbers and the trans-verse flow attack angle vary. Both fully developed and developing conditions (entrance effects) were con-sidered. The continuity and momentum equations, along with a transport…
Refitting of an eco-friendly sailing yacht: numerical prediction and experimental validation
2016
A 4.60 m sailing yacht, made with a flax fiber composite and wood, has been refitted with the aim of hull weight reduction and performance improvement during regattas. The first objective was obtained with a lightening of internal hull reinforcements while the second one with a reduction of the maximum beam, in order to minimize the longitudinal moment of inertia. The refitting was first simulated via CAD-FEM interaction to establish the feasibility of the procedure and to verify the structural integrity. The resulting hull was then instrumented with strain gauges and tested under typical rigging and sailing conditions. Results obtained by the numerical modeling and measured from experiment…
O2 Loaded Germanosilicate Optical Fibers: Experimental In Situ Investigation and Ab Initio Simulation Study of GLPC Evolution under Irradiation
2022
International audience; In this work we present a combined experimental and ab initio simulation investigation concerning the Germanium Lone Pair Center (GLPC), its interaction with molecular oxygen (O2), and evolution under irradiation. First, O2 loading has been applied here to Ge-doped optical fibers to reduce the concentration of GLPC point defects. Next, by means of cathodoluminescence in situ experiments, we found evidence that the 10 keV electron irradiation of the treated optical fibers induces the generation of GLPC centers, while in nonloaded optical fibers, the irradiation causes the bleaching of the pre-existing GLPC. Ab initio calculations were performed to investigate the reac…
Long- and short-term stability of all polarization-maintaining thulium doped passively mode-locked fiber lasers with emission wavelengths at 1.95 µm …
2023
In this work, we compare the operation of a passively modelocked polarization-maintaining emission in two thulium-doped fiber lasers pumped at 1561 nm, with emission at wavelengths of 1.951 μm in one case and 2.07 μm in the other. We obtained a sequence of light pulses at 15.6 MHz, whose temporal width was 81 ps at 1.95 μm, and a sequence of light pulses at 13.1 MHz, whose temporal width was 94 ps at 2.07 μm. Finally, we also measured the long-term stability of this setup during a 24-h operation, as well as the short-term stability in a simulated harsh environment. The results confirm the superior performance of fiber laser systems with a fully polarization-maintaining design.
Mechanical properties of basalt fiber reinforced composites manufactured with different vacuum assisted impregnation techniques
2016
Abstract This work describes an experimental mechanical characterisation campaign on composites made out of a quasi-unidirectional basalt fabric. In order to evaluate the ability of commercial basalt fabrics and their composites to meet the potentials of basalt fibers, the work has used raw materials from commercial catalogs with no further modification. Two common manufacturing techniques for medium performance composites have been adopted: vacuum assisted resin infusion, and hand-impregnated vacuum bagging. Two panels, one for each technique, have been fabricated, able to provide a sufficient number of samples for a comprehensive stiffness and strength characterization through Tensile, Fl…
Restore the natural: a review and case series report on reattachment
2014
Reattachment of the original tooth fragment to the fractured tooth helps in maintaining the tooth’s color, wear resistance, morphology and translucency in the restoration. This article describes the reattachment of fractured fragment using a fiber post and dual cure resin cement with a self-etching adhesive. Two young male patients reported with a complicated crown fracture of the right maxillary central incisor due a road traffic accident. The fractured fragments were loosely attached to the palatal gingival tissue, which was then surgically removed and preserved for the reattachment procedure. The fractured tooth segments were successfully reattached following fiber post cementation. Toot…
First Specifications of a PSTM Working In the Infrared
1993
One of the most promising extension of the photon scanning tunneling microscope (PSTM) is its use as a locally resolved spectroscopic tool. The infrared (IR) spectral window offers a wide variety of interesting applications since many materials have a well-defined signature in this range. We have undertaken the experimental modifications that are necessary to operate the existing PSTM’s in the IR domain. In this work, we present preliminary data obtained with two IR light sources: an extended source (Globar type) and the free electron IR laser source (CLIO) available at LURE (Orsay). In both cases, the evanescent field has been detected with a fluoride glass optical fiber and the characteri…
Ephaptic coupling of myelinated nerve fibers
2001
Numerical predictions of a simple myelinated nerve fiber model are compared with theoretical results in the continuum and discrete limits, clarifying the nature of the conduction process on an isolated nerve axon. Since myelinated nerve fibers are often arranged in bundles, this model is used to study ephaptic (nonsynaptic) interactions between impulses on parallel fibers, which may play a functional role in neural processing.
Reduction of beauvericin and enniatins bioaccessibility by prebiotic compounds, evaluated in static and dynamic simulated gastrointestinal digestion
2015
Abstract The aim of this study was to investigate the bioaccessibility of beauvericin (BEA) and enniatins (ENs) present in wheat crispy breads. A microbial fermentation was performed by a BEA- and ENs-producer Fusarium strain, adding inulin and fructooligosaccharides (FOS) at two concentrations (1% and 5%). The bioaccessibility of mycotoxins was determined by static and dynamic simulated gastrointestinal digestion systems, imitating the digestive physiological conditions until the colonic compartment. BEA and ENs were determined in the intestinal fluids by liquid chromatography-tandem mass spectrometry (LC-MS/MS). BEA and ENs bioaccessibilities in the static model (46.7–61.1% and 6.2–44.9%,…