Search results for " impianti"

Electrochemical detection of chloride ions using Ag-based electrodes obtained from compact disc

2022

Abstract In this work electrochemical sensors fabricated from compact disc material (waste or new) are used to quantify chloride ions in different types of samples. All three electrodes, working, counter, and pseudo-reference electrodes, were fabricated from the compact disc and directly used. Different parameters were studied in order to demonstrate the possibility of using this waste material for efficient and low-cost electrochemical sensors. Chloride sensing performance was evaluated using linear scan voltammetry as the detection technique. A sensitivity of 0.174 mA mM−1 cm−2 with a limit of detection of 20 μM and excellent selectivity against many interferents was observed. Selectivity…

ASSESMENT OF TEMPERATURE POLARIZATION IN MEMBRANE DISTILLATION CHANNELS BY LIQUID CRYSTAL THERMOGRAPHY

2014

AbstractThe measurement of local temperature distributions within a membrane distillation (MD) channel is a crucial step for the optimization of the channel and spacer geometry. This information allows the estimation of temperature polarization phenomena, which can dramatically influence the thermal efficiency of the process and the optimal choice of the geometric configuration (net spacer features, channel size, etc.). In the present work, a recently presented experimental technique, based on the use of thermochromic liquid crystals and digital image analysis, has been employed in order to assess the temperature polarization phenomena. The local heat transfer coefficient distribution on th…

Experimental assessment of the shield-to-salt-fog properties of basalt and glass fiber reinforced composites in cork core sandwich panels applications

2018

Abstract In this paper, the effect of salt-fog exposition on the mechanical behavior of sandwich panels having cork agglomerate core was investigated. In particular, the aim of this research work is to assess the shield function of unidirectional basalt and E-glass reinforced polymer on the aging and failure mechanism of the core when such class of material are destined to operate in hostile environments (e.g., marine environment). To do this, the manufactured sandwich panels were exposed up to 60 days to salt-fog environment, according to ASTM B 117 standard. Unaged and aged specimens were analyzed through three point bending tests after aging time of 10, 25 and 60 days. Digital Image Corr…

Direct numerical simulation of turbulent heat transfer in curved pipes

2012

Fully developed turbulent convective heat transfer in curved pipes was investigated by Direct Numerical Simulation for a friction velocity Reynolds number of 500, yielding bulk Reynolds numbers between 12 630 and ~17 350 according to the curvature (pipe radius/curvature radius). Three different curvatures were compared, i.e. 0 (straight pipe), 0.1 and 0.3. The Prandtl number was 0.86. The computational domain was a tract of pipe 5 diameters in length. A finite volume method was used, with multiblock structured grids of ~5.3x10E6 hexahedral volumes. Simulations were typically protracted for 20 LETOT’s starting from coarse-grid results. Results were post-processed to compute first and second …

Reciprocating Flow in a Plane Channel: Comparison of RANS Turbulence Models and Direct Numerical Simulation

2009

Thermofluid-dynamic assessment of the EU-DEMO divertor single-circuit cooling option

2023

Until 2019, the thermo-hydraulic development of the EU-DEMO divertor was based on the “double-circuit” concept, in which two independent cooling circuits served by two different Primary Heat Transfer Systems were used to cool the Plasma-Facing Components (PFC) and the Cassette Body (CB). During the Divertor Final Design Review Meeting, held in May 2020, the possibility to adopt a single cooling circuit to serve both components was suggested. This new cooling circuit was originally conceived with the aim of simplifying remote maintenance, with potential benefits for some aspects of safety and balance of plant design and integration. During the years from 2020 to 2022, in the fram…

Electrochemical detection of dopamine with negligible interference from ascorbic and uric acid by means of reduced graphene oxide and metals-NPs base…

2021

Abstract Dopamine is an important neurotransmitter involved in many human biological processes as well as in different neurodegenerative diseases. Monitoring the concentration of dopamine in biological fluids, i.e., blood and urine is an effective way of accelerating the early diagnosis of these types of diseases. Electrochemical sensors are an ideal choice for real-time screening of dopamine as they can achieve fast, portable inexpensive and accurate measurements. In this work, we present electrochemical dopamine sensors based on reduced graphene oxide coupled with Au or Pt nanoparticles. Sensors were developed by co-electrodeposition onto a flexible substrate, and a systematic investigati…

Analisi dei modelli validi per lo studio dei processi di deposizione secca e sui dati meteo previsionali dell’ECMWF

2017

The DEIM's research group in collaboration with ENEA –C.R. Bologna, has performed the following activities: "Analysis of models to study dry deposition processes of pollutants in atmosphere onto urban surface", and "Preliminary study of compatibility between ECMWF forecast data and CALMET model". Regarding the first activity, a dry deposition model, based on electrical analogy, is developed to analyze complex phenomena,such as inertial impact processes and wind turbulence effects, that influence the transport of pollutants in the interface between urban canopy and quasi-laminar sublayer. The model allows the deposition rate assessment for particles with different diameters and various atmos…

Analysis of Protected Accidental Transients in the EFIT Reactor With the RELAP5 Thermal-Hydraulic Code

2008

The European Facility for Industrial Transmutation (EFIT) is aimed at demonstrating the feasibility of transmutation process through the Accelerator Driven System (ADS) route on an industrial scale. The conceptual design of this reactor of about 400 MW thermal power is under development in the frame of the European EUROTRANS Integrated Project of the EURATOM Sixth Framework Program (FP6). EFIT is a pool-type reactor cooled by forced circulation of lead in the primary system where the heat is removed by steam generators installed inside the reactor vessel. The reactor power is sustained by a spallation neutron source supplied by a proton beam impinging on a lead target at the core centre. A …

The sustainability of olive orchard planting management for different harvesting techniques: An integrated methodology

2019

Abstract The globalization of the olive oil market has caused greater competitiveness in terms of olive oil quality and production costs and the main countries interested in olive growing, have introduced efficient planting design and horticultural techniques in order to meet these requirements. In this paper the sustainability of olive orchard planting management for different olive fruit-harvesting methods has been assessed on the basis of the data gathered by the Geographic Information System and processed using a Multi-Criteria Decision Making Analysis. In particular, three different agronomic scenarios have been analyzed and a specific cultivar has been considered in order to ensure th…