Search results for " impianti"
showing 10 items of 778 documents
On the Improved Current Pulse method for the thermal diffusive characterization of lithiated ceramic pebble beds
2012
Abstract Packed pebble beds are granular systems composed of small particles generally arranged in irregular lattices and surrounded by a gas filling their interstitial spaces. They show non-linear and coupled thermal and mechanical behaviours, which are under theoretical and experimental investigation to set-up a realistic constitutive model to be adopted for design-oriented purposes. At the Department of Nuclear Engineering (DIN) of the University of Palermo a realistic constitutive model of fusion-relevant pebble beds thermo-mechanical behaviour was developed adopting a “continuous” approach, based on the assumption that a pebble bed could be considered as a continuous, homogeneous and i…
Modelling of the thermal mechanical behaviour of a single size beryllium pebble bed
2001
The Helium Cooled Pebble Bed (HCPB) Blanket for fusion power reactors and the ITER breeding blanket are based on the use of pebble beds of lithium ceramics as breeder and beryllium as neutron multiplier. Experimental activities were performed at Forschungszentrum Karlsruhe concerning the measurement of pebble bed heat transfer parameters. At the Department of Nuclear Engineering of the University of Palermo, the experimental results have been reproduced by means of the ABAQUS finite element code. Moreover, a thermal-mechanical theoretical model has been developed for single size beryllium pebble beds. In the paper the results from the numerical and theoretical analyses and the comparison wi…
Reflection-refraction effects on light distribution inside tubular photobioreactors
2017
One of the main parameters affecting autotrophic algae cultures is photon absorption distribution inside the photobioreactor. This clearly depends on the geometry of both the radiation source and the photobioreactor, as well as on algae suspension optical properties. In this work the local volumetric rate of photon absorption LVRPA in a cross-section of a horizontal-pipe photobioreactor was investigated by means of simplified Monte Carlo simulations. In particular, the fate of a number of photons perpendicularly hitting the photobioreactor circular section was simulated in relation to different values of algae concentration. The model takes into account refraction/reflection phenomena at th…
Thermo-mechanical analyses and ways of optimization of the helium cooled DEMO First Wall under RCC-MRx rules
2017
Abstract The EUROfusion Consortium develops a design of a fusion power demonstrator plant (DEMO) in the framework of the European “Horizon 2020” innovation and research program. One of the key components in the fusion reactor is the Breeding Blanket (BB) surrounding the plasma, ensuring tritium self-sufficiency, heat removal for conversion into electricity, and neutron shielding. Among the 4 candidates for the DEMO BB, 2 of them use helium as coolant (HCPB, HCLL), and another one (DCLL) uses helium to cool down the First Wall (FW) only. Due to uncertainties regarding the plasma Heat Flux (HF) load the DEMO BB integrated FW will have to cope with, a set of sensitive thermal and stress analys…
Numerical simulations of the dependency of flow pattern on impeller clearance in stirred vessels
2001
The flow and turbulence fields in a fully baffled vessel stirred by a Rushton turbine have been simulated by means of computational fluid dynamics (CFD) techniques. The simulation techniques adopted (the "Sliding-grid" and "Inner-outer" methods) are fully predictive and require no experimental data as boundary or initial conditions. The effect of clearance (C) on the flow patterns in stirred vessels was simulated as the flow field transition observed can be considered a particularly stringent benchmark for the testing of CFD techniques. The results are compared with previously obtained LDA data and show that the double- to single-loop transition experimentally observed when impeller clearan…
Steady state and transient thermal-hydraulic characterization of full-scale ITER divertor plasma facing components
2008
Abstract In the frame of the activities related to ITER divertor R&D, ENEA CR Brasimone was in charge by EFDA (European Fusion Development Agreement) to investigate the thermal-hydraulic behaviour of the full-scale divertor plasma facing components, i.e. the outer vertical target, the inner vertical target and the dome-liner, both in steady state and during draining and drying transient. The investigation was performed by means of both experimental test campaigns performed at ENEA CR Brasimone and theoretical simulation developed in RELAP5 Mod.3.3 environment at the Department of Nuclear Engineering of the University of Palermo (DIN). This paper presents the achieved experimental results fo…
On the theoretical–numerical study of the ITER Upper Port Plug structure hydraulic behaviour under steady state and draining and drying transient con…
2011
Abstract The ITER diagnostic Upper Port Plug (UPP) is a water-cooled stainless steel structure aimed to integrate within vacuum vessel the plasma diagnostic systems, shielding them from neutron and photon irradiation. Due to the very intense heat loads expected, a proper cooling circuit has been designed to ensure an adequate UPP cooling with an acceptable thermal rise and an unduly high pumping power and to perform its draining and drying procedure by injection of pressurized nitrogen. A theoretical research activity has been launched at the Department of Nuclear Engineering of the University of Palermo aiming to investigate the hydraulic behaviour of the UPP Trapezoid Section cooling circ…
Experiments and CFD Predictions of Solid Particle Distribution in a Vessel Agitated with Four Pitched Blade Turbines
2001
The distribution of solid particles in a high aspect-ratio baffled tank agitated with four 45° pitched blade turbines (PBT) was investigated using both experimental measurements and CFD simulations. Dilute suspensions of glass beads in water and moderately viscous liquids were considered. The measurement of axial particle concentration profiles was conducted by means of a light attenuation technique. Fully predictive simulations of solid-liquid suspensions were performed using a Sliding-Grid approach coupled with the Eulerian-Eulerian Two Fluid Model and the ‘homogeneous’ two-phase k-ɛ turbulence model. The simulated particle axial concentration profiles were compared with the experimental …
Experimental tests and thermo-mechanical analyses on the HEXCALIBER mock-up
2008
Abstract Within the framework of the R&D activities promoted by European Fusion Development Agreement on the helium-cooled pebble bed test blanket module to be irradiated in ITER, ENEA Brasimone and the Department of Nuclear Engineering of the University of Palermo performed intense research activities on the modelling of the thermo-mechanical behaviour of both beryllium and lithiated ceramics pebble beds, which are envisaged to be used, respectively, as neutron multiplier and tritium breeder. In particular, at the DIN a thermo mechanical constitutive model was developed for both lithiated ceramics and beryllium pebble beds and it was successfully implemented on a commercial finite element …
Fixed Bed Adsorption of Drugs on Silica Aerogel from Supercritical Carbon Dioxide Solutions
2013
Supercritical adsorption coupled with the high adsorption capacity of silica aerogel allows the preparation of a new kind of delivery systems of poor water soluble drugs. In order to overcome drawbacks of conventional techniques where the use of liquid solvents can cause the fracture of aerogel porous structure, in this work a new adsorption process of drugs from a supercritical mixture is proposed. Adsorption takes place from a fluid solution of the drug in supercritical CO2and ethanol as cosolvent. A fixed bed adsorption plant has been developed to allow fast mixing of fluid phase and effective contact in the adsorption column. The use of ethanol as cosolvent allows to overcome the limita…