Search results for " ingegneria"

showing 10 items of 796 documents

An empirical analysis of revenue drivers in the mobile app market

2013

Mobile App Market Revenue Econometric analysisSettore ING-IND/35 - Ingegneria Economico-Gestionale
researchProduct

Phenomenological approach to compare the crystallization kinetics of isotactic polypropylene and polyamide-6 under pressure

2001

Reliable experimental data for semicrystalline polymers crystallized under pressure are supplied on the basis of a model experiment in which drastic solidification conditions are applied. The influence of the pressure and cooling rate on some properties, such as the density and microhardness, and on the product morphology, as investigated with wide-angle X-ray scattering (WAXS), is stressed. Results for isotactic polypropylene (iPP) samples display a lower density and a lower microhardness with increasing pressure over a wide range of cooling rates (from 0.01 to 20 °C/s). Polyamide-6 (PA6) samples exhibit the opposite behavior, with the density and microhardness increasing at higher pressur…

Morphology (linguistics)Materials sciencePolymers and PlasticsThermodynamicsIndentation hardnessCrystallinityPhase (matter)TacticityPolymer chemistryMaterials ChemistryPressurePolyamides (PA6)Physical and Theoretical Chemistrychemistry.chemical_classificationSettore ING-IND/24 - Principi Di Ingegneria ChimicaScatteringCooling rateSettore ING-IND/34 - Bioingegneria IndustrialePolymerCondensed Matter PhysicsKineticsSettore ING-IND/22 - Scienza E Tecnologia Dei MaterialichemistryPolyamidePoly(propylene) (PP)Crystallization
researchProduct

Phase separation of polymer blends in solution: A case study

2016

Abstract The phase behavior and phase separation features of the quaternary system poly- l -lactide (PLLA)/poly-rac-lactide (PLA)/dioxane/water were investigated. Experiments were performed with fixed total polymer concentration of 6 wt%, by varying the PLLA/PLA weight ratio. Blend weight compositions examined were 100/0, 80/20, 50/50, 20/80 and 0/100, at fixed dioxane/water weight ratio (87/13). Cloud point measurements reported that the demixing temperatures of blends are close to PLLA in the same mixed solvent, in line with the calculated spinodals. As regards to foam preparation, above the PLA cloud point, morphology is similar to pure PLLA foams; conversely, below PLA cloud point, the …

MorphologyMorphology (linguistics)Materials sciencePolymers and PlasticsPhase separationGeneral Physics and Astronomy02 engineering and technology010402 general chemistry01 natural scienceschemistry.chemical_compoundPhysics and Astronomy (all)Phase (matter)Materials ChemistryComposite materialchemistry.chemical_classificationCloud pointSettore ING-IND/24 - Principi Di Ingegneria ChimicaLactidePolymers and PlasticEquilibrium conditionsOrganic ChemistryPolymerPolymer blend021001 nanoscience & nanotechnology0104 chemical sciencesPolymer solutionSolventSettore ING-IND/22 - Scienza E Tecnologia Dei MaterialichemistryChemical engineeringPolymer blend0210 nano-technology
researchProduct

Greenhouse gas emissions from integrated solid waste management: a new mathematical model

2016

Municipal solid waste management significantly contributes to the emission in the atmosphere of greenhouse gases (e.g. CO2, CH4, N2O) and therefore the management process from collection to treatment and disposal has to be optimized in order to reduce these emissions. Many literature models developed for the evaluation of greenhouses gases emissions from the waste management system are based on the analysis of the life cycle. These models are not optimized for evaluation of emissions. The aim of this study is to overcome these limitations by proposing a mathematical model to estimate greenhouse gas emissions resulting from the integrated waste management. The model is aimed to be a verifica…

Municipal Solid Waste ManagementMathematical modelSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleGreenhouse gaseWaste treatmentMunicipal Solid Waste Management; Greenhouse gases; Waste treatment; Mathematical model
researchProduct

Biogas from municipal solid waste landfills: A simplified mathematical model

2018

AbstractMunicipal solid waste (MSW) landfills now represent one of the most important issues related to the waste management cycle. Knowledge of biogas production is a key aspect for the proper exploitation of this energy source, even in the post-closure period. In the present study, a simple mathematical model was proposed for the simulation of biogas production. The model is based on first-order biodegradation kinetics and also takes into account the temperature variation in time and depth as well as landfill settlement. The model was applied to an operating landfill located in Sicily, in Italy, and the first results obtained are promising. Indeed, the results showed a good fit between me…

Municipal solid wasteEnvironmental EngineeringWaste Disposal Facilitie020209 energyBiogas modelling02 engineering and technologySolid WasteBiogasWaste ManagementBiofuelLandfill lifetime0202 electrical engineering electronic engineering information engineeringDuration (project management)Landfill gaSicilyWater Science and TechnologyWaste managementSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSettlement (structural)Flux chamberModels TheoreticalRefuse DisposalBiodegradation kineticsWaste Disposal FacilitiesLandfill gasBiodegradation EnvironmentalBiofuelBiofuelsEnvironmental scienceEnergy source
researchProduct

Modeling of perched leachate zone formation in municipal solid waste landfills.

2010

The paper presents a 1D mathematical model for the simulation of the percolation fluxes throughout a landfill for municipal solid waste (MSW). Specifically, the model was based on mass balance equations, that enable simulation of the formation of perched leachate zones in a landfill for MSW. The model considers the landfill divided in several layers evaluating the inflow to and outflow from each layer as well as the continuous moisture distribution. The infiltration flow was evaluated by means of the Darcy’s law for an unsaturated porous medium, while the moisture distribution evaluation has been carried out on the basis of the theory of the vertically distributed unsaturated flow. The solu…

Municipal solid wasteSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleMoistureMass balanceEnvironmental engineeringInflowModels TheoreticalInfiltration (hydrology)Mathematical modelHydrologic balancesWaste ManagementEnvironmental sciencePerched leachate zoneComputer SimulationLandfillLeachatePorous mediumWaste Management and DisposalWater contentWaste management (New York, N.Y.)
researchProduct

Destino dei radionuclidi negli impianti di depurazione delle acque reflue urbane

2013

Lo studio presentato in questo lavoro ha avuto come obiettivo il monitoraggio e l’analisi del destino dei radionuclidi negli impianti di depurazione ed è stato condotto in collaborazione tra l’Università di Palermo e ARPA Sicilia. Esso ha previsto lo svolgimento di due fasi sperimentali. Nel corso della prima sono stati monitorati gli impianti di depurazione a servizio dei Comuni di Palermo (in località Acqua dei Corsari e Fondo Verde), Bagheria e Cefalù; nella seconda fase l’indagine è stata limitata al solo impianto di Acqua dei Corsari, nel quale si erano riscontrati in precedenza i maggiori spunti di interesse. In entrambe le fasi sono stati prelevati campioni istantanei in diverse sezi…

N/ASettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSettore ING-IND/20 - Misure E Strumentazione Nucleari
researchProduct

Influence of carbon to nitrogen ratio on nitrous oxide emission in an Integrated Fixed Film Activated Sludge Membrane BioReactor plant

2018

Abstract In this study a University of Cape Town (UCT) Integrated Fixed Film Activated Sludge (IFAS) Membrane BioReactor (MBR) wastewater treatment plant was monitored in terms of nitrous oxide (N2O) emissions. The short term effect on the N2O emission due to the influent carbon-to-nitrogen (C/N) ratio variation (C/N ratios of 2, 5 and 10 gCOD/gN) was evaluated. Since in a previous study, the effect of the C/N ratio was studied in the same system without biofilm (UCT-MBR configuration) the main aim here was to investigate the role of biofilms on N2O emissions. Under all the investigated C/N ratios, the N2O fluxes and the average emission factors were lower than that of previous studies with…

N2O-EmmisionDenitrificationCarbon-to-nitrogen ratioStrategy and Management0208 environmental biotechnologychemistry.chemical_element02 engineering and technology010501 environmental sciencesMembrane bioreactor01 natural sciencesIndustrial and Manufacturing Engineeringchemistry.chemical_compoundWWTP0105 earth and related environmental sciencesGeneral Environmental Science2300Settore ICAR/03 - Ingegneria Sanitaria-AmbientaleRenewable Energy Sustainability and the EnvironmentChemistryGlobal warmingEnvironmental engineeringBuilding and ConstructionNitrous oxideNitrogen removalC/N variationequipment and suppliesAnoxic watersNitrogen020801 environmental engineeringStrategy and Management1409 Tourism Leisure and Hospitality ManagementActivated sludgeEnvironmental chemistrySewage treatmentJournal of Cleaner Production
researchProduct

Recovering ammonium by treated and untreated zeolitic mixtures: A comprehensive experimental and modelling study

2023

The recovery of ammonium (NH4+) from aqueous solutions by zeolite is attractive. In this study, the physicalchemistry of NH4+ adsorption process from aqueous solution by two zeolitic mixtures, either treated or not treated with NaCl, was assessed. Results suggested that the zeolitic mixture richer in mordenite and with high specific surface area adsorbed more NH4+ than the one richer in clinoptilolite and heulandite showing a lower specific surface area. NaCl treatment increased the amount of NH4+ adsorbed by the zeolitic mixtures. The higher amount of NH4+ adsorbed by the zeolitic mixtures treated with NaCl was explained by the low/high density water model accounting for cation exchange am…

NaCl treatmentSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleMechanics of MaterialsSettore AGR/13 - Chimica AgrariaGeneral Materials ScienceGeneral ChemistryZeolites mineralogyIsotherm modelsCondensed Matter PhysicsAmmonium removalKinetics model
researchProduct

THE EFFECT OF INBOUND, OUTBOUND AND COUPLED INNOVATION ON PERFORMANCE

2012

The focus of this paper is on exploring linkages among Open Innovation practices and firm performance. While, in the last ten years, a certain amount of papers facing such issue has been published, most of them treat inbound, outbound, and coupled innovation practice processes separately respect to different dimensions of innovation and financial performance. We argue that the concurrent influence of specific Open Innovation practices on both innovation and economic-financial firms' performance has not been investigated so far into the literature and it is of primary managerial importance. We empirically test our framework on a sample of 105 companies listed on the Industrial Machinery and…

NasdaqFinancial performanceIndex (economics)Strategy and ManagementSample (statistics)Secondary data sourcesinnovation performanceSettore ING-IND/35 - Ingegneria Economico-GestionaleOpen Innovationfinancial performanceManagement of Technology and InnovationComponent (UML)EconomicsOpen Innovation innovation performance financial performance Nasdaq secondary data sourcessecondary data sources.Business and International ManagementMarketingOpen innovation
researchProduct