Search results for " masonry"
showing 10 items of 76 documents
Influence of column shear failure on pushover based assessment of masonry infilled reinforced concrete framed structures: A case study
2017
Structural frames, constructed either of steel or reinforced concrete (RC), are often infilled with masonry panels. However, during the analysis of the structural frames, it has become common practice to disregard the existence of infills because of the complexity in modeling. This omission should not be allowed because the two contributions (of infills and of frames) complement each other in providing a so different structural system. The use of different modeling assumptions significantly affects the capacity as well as the inelastic demand and safety assessment. In specific, the adoption of equivalent diagonal pin-jointed struts leaves open the problem of the evaluation of the additional…
Prediction Equations for Out-of-Plane Capacity of Unreinforced Masonry Infill Walls Based on a Macroelement Model Parametric Analysis
2021
In the seismic performance assessment of reinforced concrete (RC) frames, a reliable estimation of the capacity of unreinforced masonry (URM) infill walls is of utmost importance to ensure structural safety conditions. With particular attention to the out- of-plane (OoP) capacity of URM infill walls after in-plane (IP) damage, the issue of defining reliable analytical prediction models for the assessment of the capacity is an ongoing study. In this paper, empirical equations are proposed for the evaluation of the infilled frame’s OoP capacity, with or without IP damage, based on an extensive numerical parametric analysis, focusing on the influence of the key parameters that govern the mecha…
A semi-empirical stress-strain model for equivalent strut fiber-section modeling of infilled frames
2017
Infill-frame interaction is commonly modeled by means of equivalent strut macro-models. The main difficulty in using this phenomenological approach is to properly calibrate a force-displacement curve for the struts, as this depends not only on the geometrical and mechanical properties, but more specifically on the different potential damage mechanisms which may occur for the infill-frame system subject to lateral forces. If fiber-section elements are used as diagonal struts, the force-displacement curve is substituted by a stress-strain law. In both cases, the attribution of the inelastic law of the struts, based on a mechanical approaches, is not valid in general, as mechanical approaches …
EVALUATION OF FRAGILITY OF INFILLED FRAME STRUCTURES SUBJECT AFTERSHOCKS BY MEANS OF DOUBLE INCREMENTAL DYNAMIC ANALYSIS APPROACH
2018
The paper investigates the role of masonry infill walls on the seismic fragility of reinforced concrete structures subject to mainshock/aftershock sequences. An assessment framework aimed at determining aftershock fragility curves of bare frames and infilled frames is presented. The framework is based on a Double Incremental Dynamic Analysis (D-IDA) approach, which provides the adoption of ground motions defined by combining a fixed intensity mainshock with a set of variable intensity aftershocks. Mainshock (MS) intensity is scaled several times and combined with the same set of aftershocks (AS). Chord-rotation and shear limit states are specifically defined to consider the influence of mas…
Macroelement Model for In-Plane and Out-of-Plane Responses of Masonry Infills in Frame Structures
2018
A new macroelement model is presented in this paper for the simulation of the in-plane (IP) and out-of-plane (OOP) response of infilled frames subjected to seismic actions. The model consists of two diagonal, one horizontal, and one vertical struts. Each strut is represented by two fiber-section beam-column elements. The model is able to capture the arching action of the wall under an OOP load as well as the interaction between the IP and OOP actions. The proposed modeling approach is sufficiently simple and efficient that it can be used for the static or dynamic analysis of an entire structural system. An experimental validation has been carried out. A further numerical study performed wit…
Definition of diagonal Poisson's ratio and elastic modulus for infill masonry walls
2014
The prediction of the response of infilled frames through the simplified approach of substituting the infill with an equivalent pin-jointed strut is treated. In this framework the results of an experimental study for the mechanical characterization of different types of masonry infills having the aim of estimating strength, Young modulus and Poisson's ratio are presented. Four types of masonry were investigated and subjected to ordinary compressive tests orthogonally to the mortar beds and along the directions of the mortar beds. The experimental campaign confirmed the possibility of using an orthotropic plate model for prediction of the Poisson's ratio and Young modulus along the diagonal …
Advanced Strategies and Materials for Reinforcing Normal and Disturbed Regions in Brick Masonry Columns
2016
This work presents the results of an experimental investigation on the behavior of 42 solid clay brick masonry columns internally strengthened by fiber-reinforced polymer (FRP) fabrics or stainless steel grids placed in horizontal mortar joints. In some cases, every course, and in other cases, alternate courses were reinforced with steel grids, carbon, and basalt FRP fabrics. Monotonic compressive loading tests were carried out under concentric and eccentric loads. Eccentric tests were carried out by loading the specimens on a reduced area with respect to the entire cross section, producing a disturbed region (D-region). A detailed characterization of the constituent materials was made expe…
Brick Masonry Columns Externally Wrapped with Steel Wires under Concentric and Eccentric Loads
2017
This paper discusses an experimental investigation of clay brick columns that are externally strengthened by steel wire collars wrapping the horizontal mortar joints. The study aims to prove the effectiveness of the proposed strengthening technique and detect the efficiency of different numbers of steel collars. Additionally, the effect of eccentric loading is investigated. This paper proves that an analytical expression available in the previous literature can be modified to provide the strength of the equivalent homogeneous cross section in simple compression. To this aim, the biaxial strength domain of the bricks is modified to account for the lateral pressure exerted by the steel collar…
Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons
2014
Abstract The results of in situ tests carried out on unreinforced and reinforced poor rubble masonry full-scale walls in the earthquake prone Messina (Italy) area are presented and discussed. This experimental research was aimed at the assessment of the in plane shear behaviour of ancient masonry strengthened with an innovative system for masonry and retrofitting of reinforced concrete element constituted by three-dimensional pre-tensioned stainless steel ribbons. A comparison between different strengthening configurations was made in order to characterise the behaviour of masonry panels under shear-compression load, focusing attention on the diagonal cracking failure mode. The effectivenes…
Masonry columns confined with fabric reinforced cementitious matrix (FRCM) systems: A round robin test
2021
Abstract The conservation and the preservation of existing masonry buildings, most of them recognized as cultural heritage, require retrofitting techniques that should reduce the invasiveness and assure reversibility and compatibility with the substrate. In this perspective, the strengthening system should be able to improve the bearing capacity of the structural member and, at the same time, to assure mechanical and material compatibility. The use of Fabric Reinforced Cementitious Matrix (FRCM) composites is now recognized to be suitable for these purposes. Indeed, the inorganic matrix has comparable properties with respect to the existing historical mortars while the fabric has relevant t…