Search results for " optical fiber"
showing 10 items of 327 documents
Etched LPFGs in reflective configuration for sensitivity and attenuation band depth increase
2016
A reflection configuration setup for long-period fiber gratings is presented. It permits to obtain a unique band with attenuation double than that obtained in transmission configuration, which is interesting for applications where this value is reduced (e.g., the mode transition phenomenon). The method is based on the deposition of a silver mirror at the end of the optical fiber, which permits to absorb the power transmitted through cladding modes and to avoid the generation of interferometric bands. The method also solves the requirement of a precise cleave or to polish the end of the grating, a drawback present in other publications. The versatility of the setup has been proved by applica…
Suppression of stimulated Raman scattering in optical fibres by power-controlled multifrequency pumping
1999
International audience; We present a method for suppressing the stimulated Raman scattering process induced by a multifrequency pump field propagating in a normally dispersive single-mode fibre. The suppression process is completely achieved by suitably choosing the frequency separation between the pumps, as well as the power distribution among the frequency components of the pump field. The experimental spectra show the effectiveness of this suppression process for a dual-frequency pumping configuration.
Wavelength conversion from 1.3 µm to 1.5 µm in single-mode optical fibres using Raman-assisted three-wave mixing
2000
International audience; We theoretically analyse the achievement of wide-range all-optical wavelength conversion of a 1.31 µm signal to an idler wave in the 1.5 µm spectral region by Raman-assisted three-wave mixing in single-mode optical fibres. Raman-assisted three-wave mixing allows efficient conversion on a large frequency detuning bandwidth while alleviating the need for stringent phase-matching conditions.
Optical aging behaviour naturally induced on As_2S_3 microstructured optical fibres
2014
The efficiency and the stability of As2S3 microstructured optical fibres (MOFs) are limited by the shift of their optical properties that occurs over time due to a naturally induced aging process. Such sensitivity becomes more crucial for long optical path. Among the variety of fibre designs, the MOFs are developed for promising photonics applications such as supercontinuum generation for example. In the present work, we carried out an extensive aging study on As2S3 chalcogenide MOFs in ambient atmosphere. The evolution of the fibre transmission spectrum has been studied with regards to exposure time. The analysis of the transmission line profile was performed in terms of different spectral…
Intensity-Modulated Optical Fiber Sensor for AC Magnetic Field Detection
2015
An erbium-doped (Er3+) fiber optic laser is proposed for sensing alternated magnetic fields by measuring the laser intensity modulation. The sensor is fabricated using two partially overlapped narrow-band fiber Bragg gratings (FBGs) and a section of doped fiber in a Fabry–Perot configuration. Laser power stability and bandwidth are studied while changing the overlap. A bulk rod of TbDyFe, a magnetostrictive material, is glued to both the FBGs and the laser wavelength and power are modulated according to the magnetic field. Acquisition and processing are done using virtual instrumentation. Results have shown the possibility of detecting 11.18 $\mu \text{T}_{\mathrm {{rms}}}/\surd $ Hz for an…
Generation of supercontinuum in erbium-doped microstructured optical fibers
2009
We present experimental results on supercontinuum (SC) generation in Er-doped microstructured optical fibers (MOF) pumped with nanosecond pulses at 1064 nm. The Er doping increases the effective nonlinear refractive index [1]. As a result, nonlinear interactions are enhanced and broad supercontinuum spectra are generated with relatively low pump power. Supercontinuum spectra generated in two fibers with the zero dispersion wavelengths (ZDW) close to the pump wavelength are presented. The first MOF is an endlessly singlemode fiber with normal dispersion at the pump wavelength, while the second fiber is a large air-filling fraction MOF with anomalous dispersion at 1064 nm.
Ultrahigh-birefringent squeezed lattice photonic crystal fiber with rotated elliptical air holes.
2010
We report an experimental realization of a highly birefringent photonic crystal fiber as a result of compressing a regular hexagonal structure. The experimental measurements estimate a group birefringence of approximately 5.5x10(-3) at 1550 nm in good agreement with the numerical results. We study the influence of compressing the regular structure at different directions and magnifications, obtaining a method to realistically enhance the phase birefringence while moderating the group birefringence.
Flat supercontinuum generation pumped by amplified noise-like pulses from a figure-eight erbium-doped fiber laser
2017
The conditions to obtain noise-like pulses (NLPs) from a figure-eight fiber laser (F8L) and their application for supercontinuum (SC) generation in the anomalous dispersion regime are reported. The F8L is designed to remove the undesired low-intensity background radiation from pulse emission, generating NLPs with a 3 dB spectral bandwidth of 17.43 nm at the fundamental repetition frequency of 0.8 MHz. After amplification, NLPs reach a maximum average power of 9.2 mW and 123.32 nm spectral bandwidth. By controlling the amplifier pump power, flat SC generation is demonstrated through both a 800 m long spool of SMF-28 fiber and a piece of 5 m long highly nonlinear optical fiber. The results de…
Theory of parabolic pulse propagation in nonlinear dispersion decreasing optical fiber amplifiers
2008
Optical fibers ; Nonlinear optics ; Optical fiber amplifiers ; Optical amplifier ; Optical solitons ; Electromagnetic wave propagation ; Pulse propagation ;; International audience; We show that pulse spectral broadening in normally dispersive nonlinear fiber amplifiers may be enhanced by introducing a suitable dispersion tapering. We obtain an analytical dispersion profile that permits one to reduce pulse propagation in a varying dispersion fiber to the case of an equivalent fiber with constant parameters.
High frequency microwave signal generation using dual-wavelength emission of cascaded DFB fiber lasers with wavelength spacing tunability
2010
[EN] A dual wavelength fiber laser source based on two cascaded phase-shifted fiber Bragg gratings is presented The gratings are written in an erbium-doped fiber each configuring the cavity of a distributed feedback fiber laser The spacing between lasing modes is controlled dynamically by the use of piezoelectric actuators A continuous tuning range of 5-724 pm of the wavelength difference which is equivalent to a photodetected 072-92 GHz range is obtained Efficient generation from the L to the W microwave and millimeter bands has been achieved by heterodyne photodetection of the dual-wavelength optical signal (C) 2010 Elsevier BV All rights reserved