Search results for " photovoltaic"

showing 10 items of 242 documents

An economic study about the installation of PV plants reconfiguration systems in Italy

2014

This paper shows the economic convenience of the application of a reconfiguration system for photovoltaic plants, considering the incentives system in Italy and its recent modifications. The reconfiguration is an alternative to the Distributed Maximum Power Point Tracking, DMPPT, technique used to overcome the mismatch problem in Photovoltaic, PV, plants. The reconfiguration techniques employ a microprocessor-based system that modifies the layout of the PV plant by physically changing the connections among modules. After the explanation of the working principle of the PV reconfiguration system allowing the improvement of the efficiency of the same plant and the relevant installation, the ma…

Engineeringbusiness.industryPhotovoltaic systemControl reconfigurationControl engineeringSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciMaximum power point trackingRenewable energyReliability engineeringSettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaSettore ING-IND/31 - ElettrotecnicaIncentiveGrid-connected photovoltaic power systemElectricityRooftop photovoltaic power stationbusinessReconfiguration photovoltaic incentives policies
researchProduct

Reconfiguration Techniques of Partial Shaded PV Systems for the Maximization of Electrical Energy Production

2007

In this paper, the research of the optimal layout of photovoltaic (PV) modules in a PV array giving the maximum output power under different shaded working conditions is carried out. The particular condition of non uniform solar exposition of the modules is analyzed. The study of the different configurations has been carried out starting from a circuital model used for the design of PV cells and for the simulation of the working behavior of PV arrays. The attained results appear to be interesting although the complexity of the problem in mathematical terms is huge when the number of panels is high. Moreover, the results confirm that this approach often allows to attain a higher electrical e…

Engineeringbusiness.industryPhotovoltaic systemControl reconfigurationPhotovoltaic cells Solar power generation Circuit optimization.MaximizationMaximum power point trackingPower (physics)Settore ING-IND/31 - ElettrotecnicaElectricity generationElectronic engineeringGrid-connected photovoltaic power systembusinessSolar power
researchProduct

Higher PV Module Efficiency by a Novel CBS Bypass

2011

There is an increasing focus on reducing costs and improving efficiency for photovoltaic (PV) cells and modules as well as finding a more efficient approach to the product manufacturing. This letter introduces an innovative solution to bypass shaded PV cells instead of a traditional Schottky diode, in order to avoid overheating of cells in the case of partial shading. The goal is to reduce the power dissipation and improve the general efficiency of a PV generator. A novel device called cool bypass switch is then presented. It is made up of a Power MOS driven by a controller with the task to charge a storage capacitor. Tests and comparisons with standard Schottky diodes are then performed an…

Engineeringbusiness.industryPhotovoltaic systemElectrical engineeringSchottky diodeMaximum power point trackinglaw.inventionCapacitorSolar cell efficiencyOperating temperaturelawHardware_INTEGRATEDCIRCUITSGrid-connected photovoltaic power systemBypass schottky diode efficiency hot-spot photovoltaic (PV)Electrical and Electronic EngineeringbusinessHardware_LOGICDESIGNDiode
researchProduct

A photovoltaic system suitable for the battery pack charging of an electrically power assisted velocipede

2012

The paper describes the designing, sizing, realization and setting up of a complete system suitable for the management of an electrically power assisted velocipede using a photovoltaic module for the charging of the batteries. In the work an overview on the sustainable mobility needs and on the commercial electrically power assisted velocipedes is presented and the "Ecolapa" prototype, set up in the SDELab laboratory of Palermo University, is precisely described underlining the designing, implementation and setting up phases of the photovoltaic charging system settled up on the velocipede. Moreover tests oriented on the setting up of the whole system and validation tests on the prototype ar…

Engineeringbusiness.industryPhotovoltaic systemElectrical engineeringSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciBattery packSizingPower (physics)Hardware_GENERALPower electronicsAutomation Power electronicsComputerSystemsOrganization_SPECIAL-PURPOSEANDAPPLICATION-BASEDSYSTEMSbusinessRooftop photovoltaic power station
researchProduct

Numerical Analysis of Medium Scale PV Plants and Their Power-Flow Control System With a Simple Three Phase Inverter

2012

This paper presents a mathematical analysis of a medium scale Photovoltaic (PV) power generation system connected to the distribution network and of its control system, in which the conversion stage is unique thanks to the absence of a boost chopper. Boost choppers are usually used as actuator for maximum power point tracking (MPPT). The conducted analysis leads to the conclusion that the used inverter presents two degrees of freedom that can be easily exploited in a control system in which the inverter simultaneously realizes the interconnection to the grid and at the same time realizes the MPPT control. The structure of the control system is then presented, discussed and then validated by…

Engineeringbusiness.industryPhotovoltaic systemPower factorPower Electronics PWM invertersSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciMaximum power point trackingPower optimizerMPPT controlElectric power systemStand-alone power systemControl theoryElectronic engineeringGrid-connected photovoltaic power systemPower-flow studybusinessPhotovoltaic system
researchProduct

Survey on power increase of power by employment of PV reconfigurator

2015

This paper shows the performance of a PV system under shadow projection on PV panels. The reconfiguration techniques, employing a microprocessor-based system, modifies the layout of the PV plant by physically changing the connections among modules, in order to recover the loss of power due to the shadows. Different cases have been considered to evaluate the increase of power.

Engineeringbusiness.industryReconfiguration photovoltaicPhotovoltaic systemElectrical engineeringControl reconfigurationSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciAutomotive engineeringPower (physics)Renewable energySettore ING-IND/31 - ElettrotecnicaShadowGrid-connected photovoltaic power systemPv plantbusinessProjection (set theory)
researchProduct

Distribution grid analysys through PSAT open source tools

2015

In this paper a study of an electrical distribution grid with presence of renewable energy sources performed using the Power System Analysis Tool is presented. The paper describes the load flow analysis of a real existing grid owned by the Italian DSO “ENEL Distribuzione SpA” and located in an urban area.

Engineeringbusiness.industryRenewable Energy Sustainability and the EnvironmentDistribution gridFuel cellElectrical engineeringLoad balancing (electrical power)Energy Engineering and Power TechnologyPower Sustem Analysis ToolboxWindAutomotive engineeringGrid paritySettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaBase load power plantSmart gridDistributed generationIntermittent energy sourceGrid-connected photovoltaic power systemDFIGGrid energy storagebusinessPhotovoltaic
researchProduct

Experimental characterization of series arc faults in AC and DC electrical circuits

2014

This paper presents an experimental characterization of the arc fault phenomenon, for both AC and DC systems, focusing the attention on series arcs. The aim of the study is to find some current characteristics, which can be significant for the purpose of arc detection. The arcing current signal is analyzed in both time and frequency domain. For the AC analysis, the test conditions are chosen in accordance with the “unwanted tripping tests” and the “operation inhibition tests” reported in the Standard UL 1699. The DC study is carried out on the currents waveforms acquired during some on-field tests on a PV plant. Starting from the study herein presented, the authors have found that is it pos…

Engineeringbusiness.industryarc faults detection home protection photovoltaic systems electrical safety series arcs arc fault circuit interrupter (AFCI) UL 1699Electrical engineeringArc-fault circuit interrupterlaw.inventionArc (geometry)Electric arclawFrequency domainElectrical networkElectronic engineeringHarmonicArc flashWaveformbusinessSettore ING-INF/07 - Misure Elettriche E Elettroniche
researchProduct

A New Device for the Control and the Connection to the Grid of Combined RES-based Generators and Electric Storage Systems

2013

In this paper a new device for the control and the connection to the supply utility grid of combined RES-based generators and electric storage systems is presented. The device is a bidirectional converter that can be controlled so as to facilitate the interface between the low voltage grid and photovoltaic or wind generators combined with batteries, contemporary addressing the requirements of the reference technical standards for users connection and providing different ancillary services. In the paper the functioning of the device and its circuit diagram are described, the single parts are shown and the potentiality of its control system are commented. © 2013 IEEE.

Engineeringbusiness.industryenergy storage systemElectrical engineeringGridlithium-ion;energy storage system;bidirectional converterbidirectional converterSettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaStand-alone power systemElectric power systemDistributed generationControl systemGrid-connected photovoltaic power systemElectronic engineeringElectric powerlithium-ionbusinessCircuit diagram
researchProduct

Thermoeconomic optimization of a renewable polygeneration system serving a small isolated community

2015

During the last years, special attention has been paid to renewable polygeneration technologies, able of simultaneously producing thermal, cooling, electrical energy and desalinated water from seawater. This paper focuses on an innovative polygeneration system driven by renewable energy sources, including the following technologies: hybrid photovoltaic/thermal collectors, concentrating parabolic trough (CPVT), a biomass heater, a single-stage absorption chiller and a multiple-effect distillation desalination system. The system is designed to cover the base load of an isolated small community. In previous papers, the dynamic simulation model about plant operation is discussed. In this paper,…

ExergyEngineeringSolar desalinationControl and Optimizationexergy analysiSolar heating/cooling Photovoltaic/thermal collectors Solar desalinationEnergy Engineering and Power TechnologyDesalinationlcsh:Technologyjel:Q40Exergoeconomicjel:Qjel:Q43jel:Q42jel:Q41Parabolic troughSettore ING-IND/10 - Fisica Tecnica Industrialejel:Q48jel:Q47Electrical and Electronic EngineeringEngineering (miscellaneous)jel:Q49exergoeconomicsWaste managementphotovoltaic/thermal collectors (PVT)Renewable Energy Sustainability and the Environmentbusiness.industrylcsh:Tsolar heating and coolingPhotovoltaic systemjel:Q0multiple-effect distillation (MED)jel:Q4Renewable energysolar heating and cooling; photovoltaic/thermal collectors (PVT); solar desalination; multiple-effect distillation (MED); exergy analysis; exergoeconomicsBase load power plantExergy efficiencySolar desalinationbusinessexergy analysisEnergy (miscellaneous)
researchProduct