Search results for " plastics"
showing 10 items of 2628 documents
Antibacterial biopolymeric foams: Structure–property relationship and carvacrol release kinetics
2019
Abstract In this work, the feasibility of antibacterial biopolymeric foams containing carvacrol (CRV) for potential food packaging applications was investigated. Sodium bicarbonate (SB) was chosen as foaming agent and a commercial biodegradable polymer, Mater-Bi® (MB), as a matrix. MB/SB and MB/SB/CRV systems were prepared by melt mixing and the foaming process was conducted in a laboratory press. The influence of foaming agent and antibacterial additive content was investigated. The foamed samples were characterized through morphological analysis, mechanical tests and measurements of CRV release kinetics. Moreover, a mathematical model, i.e. power law model, was used to fit the release dat…
Photoimaging through in-Situ Photopolymerization of Heterobifunctional Mesogenic Compounds in Liquid Crystalline State
2007
A series of heterobifunctional mesogenic biphenyl esters having two different polymerizable groups, i.e., acryl and diacetylene groups, were synthesized and their thermal behaviors and polymerization investigated. All compounds showed enantiotropic transitions. Under POM, highly birefringent focal-conic fan textures appeared on heating and cooling from the isotropic melt. Compounds 6−8 having a butyl spacer between a biphenyl and a diacetylene group exhibited LC phases even at room temperature. The X-ray diffractograms of compounds 6−8 showed a set of reflections in the small-angle region. They consisted of more than three sharp diffraction peaks with d spacings in the ratio of 1:1/2:1/3, s…
EFFECT OF DRAWING ON THE STRUCTURE AND THE DYNAMIC-MECHANICAL BEHAVIOR OF SALTED POLYCAPROAMIDE.
1982
Abstract Structural determinations, obtained through density, birefringence, and WAXS measurements, are reported for nylon 6/inorganic salt fiber samples as a function of draw ratio. They confirm the possibility of achieving very high amorphous orientation in these systems. Dynamic-mechanical data have also been collected which allow determination of glass transition temperatures. These are also discussed in terms of structural parameters.
Characterization of melt-polymerized polycarbonate: preparative fractionation, branching distribution and simulation
2001
Melt-polymerized bisphenol-A polycarbonate materials characterized by a low degree of branching were fractionated according to molecular weight by the continuous polymer fractionation (CPF) method. The distribution of two types of end-groups and in-chain salicylate moieties arising from thermal rearrangement reactions were assessed across the molecular weight distribution by analysis of the fractions. Experimentally determined branching densities of the fractions agreed well with a molecular simulation based on a random sampling polycondensation model. Both simulation and experiments showed that the branching density increases with molecular weight in the experimentally accessible range. (C…
Study of the Curing Process of DGEBA Epoxy Resin Through Structural Investigation
2015
In this work, a multi-scale approach with different analytical methods is applied to study the curing process and the structural properties of a diglycidyl ether of bisphenol A (DGEBA) epoxy resin. This monomer, thermally cured using 4,4′-diaminodiphenilsulfone (DDS) as hardener, is analyzed after 10, 45, 90, and 120 min of reaction time at 180 °C to obtain information on samples with different cross-linking densities. Samples are also characterized after extraction in acetone in order to obtain structural information on the insoluble parts. For this purpose, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), solid-state nuclear magnetic resonance (ss-NMR),…
Synthesis of AB and ABA block copolymers as compatibilizers in nylon 6/polycarbonate blends
1996
Nylon 6 (Ny6) and Bisphenol A polycarbonate (PC) are immiscible and form biphasic blends. To improve the compatibility of Ny6 and PC several ABA and AB Ny6/PC block copolymers were synthesized, and their compatibilizing behavior on the blends were tested. Block copolymers were prepared by reacting monoamino- or diamino-terminated Ny6 homopolymers with high molecular weight PC at 130°C in anhydrous DMSO. The reaction of diamino- and monoamino-terminated Ny6 with polycarbonate produces block copolymers of the type PC-Ny6-PC (ABA) and PC-Ny6 (AB), respectively, plus a certain amount of unconverted PC degradated to lower molecular weights. To separate the block copolymer from the unconverted PC…
Dielectric spectroscopy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly (ethyleneimine) and diglycidylether of bi…
2019
[EN] Dielectric Thermal Analysis (DETA) of a series of new thermoset obtained by click chemistry was performed. The new thermosets were obtained by a dual-curing process consisting in a first photochemical thiol-ene, followed by a thermal thiol-epoxy starting from an allyl-terminated hyperbranched poly(ethyleneimine) (HBPEI) and different proportions of diglycidylether of bisphenol A (DGEBA) and the corresponding stoichiometric proportions of pentaerythritol tetrakis (3-mercaptopropionate, PETMP). The dielectric behaviour was obtained experimentally supressing the conductive effects. Two sub-Tg intramolecular non-cooperative gamma and beta relaxations and an intermolecular cooperative alpha…
Filmability and properties of compatibilized PA6/LDPE blends
2005
Blends of low density polyethylene (LDPE) and polyamide 6 (PA6), compatibilized with an ethylene-acrylic acid copolymer (EAA), either alone or combined with a low molar mass bis-oxazoline compound (PBO), have been processed in film blowing operations and the properties of the films have been investigated. Without of compatibilization, the filmability of the blend was very poor and no significant specimen was collected. As a result of the reactive compatibilization, the blends with EAA and even more with the EAA-PBO, were processed successfully in film blowing. The films of the quaternary blends were shown to possess satisfactory mechanical properties as a result of fine and stable morpholog…
ANALISIS PENGENDALIAN PERSEDIAAN DENGAN METODE EOQ USAHA STAN KAYU SINAR SOWI KABUPATEN MANOKWARI
2020
Controlling and determining of inventory is an important thing in order to produce efficiently and able to make smooth sales. The purpose of this research is to know an analysis of controlling raw material inventoriesin the manufacture of brick by using Economic Order Quantity (EOQ) method to increase efficiency of the total inventory costin Stan Kayu Sinar Sowi. The raw material of brick is rough sand and cements.
 Type of case study research through a qualitative approach by means of interviews, observation and documentation. Case study on a wood booth business in Manokwari, West Papua.
 The results of the study that the purchase of raw materials made by the company is considere…
Halloysite nanotubes loaded with peppermint essential oil as filler for functional biopolymer film
2016
Abstract The purpose of this paper is to show how a functional bionanocomposite film with both antioxidant and antimicrobial activities was successfully prepared by the filling of a pectin matrix with modified Halloysite nanotubes (HNT) containing the essential peppermint oil (PO). Firstly, HNT surfaces were functionalized with cucurbit[6]uril (CB[6]) molecules with the aim to enhance the affinity of the nanofiller towards PO, which was estimated by means of HPLC experiments. The HNT/CB[6] hybrid was characterized by several methods (thermogravimetry, FT-IR spectroscopy and scanning electron microscopy) highlighting the influence of the supramolecular interactions on the composition, therma…