Search results for " polymer"
showing 10 items of 3533 documents
Failure maps to assess bearing performances of glass composite laminates
2018
Aim of this article is the assessment of the bearing mechanical performances of pin-loaded glass laminates as function of their geometrical configuration. To this concern, 32 specimens having different hole diameter (D), laminate width (W), and hole center to laminate free edge distance (E) have been tested under bearing conditions. The maximum bearing stress and the stress-displacement curves were analyzed as function both of hole to laminate free edge distance E and hole diameter D. Moreover, an experimental 2D failure map was created by placing the experimental results (i.e., the kind of failure mechanism occurred for each geometrical configuration) in the plane E/D versus W/D ratios. In…
Application of a compositional rotatable plan in modeling the propylene content in a vinyl chloride/propylene copolymer
2019
Abstract Using a fractional rotatable plan, the effect of five input parameters of the conduct of the copolymerization process on the amount of propylene built into the copolymer, obtained as a result of free radical suspension copolymerization of vinyl chloride with propylene in a batch suspension polymerization reactor, was analyzed. Using the results obtained, the analysis of variance was carried out and the influence of particular factors and their interactions on the product properties was determined. Thus, it was determined that the greatest influence on the amount of the incorporated propylene in the copolymer is exerted by the amount of propylene introduced into the system, while th…
Diode laser welding of ABS: Experiments and process modeling
2009
International audience; The laser beam weldability of acrylonitrile/butadiene/styrene (ABS) plates is determined by combining both experimental and theoretical aspects. In modeling the process, an optical model is used to determine how the laser beam is attenuated by the first material and to obtain the laser beam profile at the interface. Using this information as the input data to a thermal model, the evolution of the temperature field within the two components can be estimated. The thermal model is based on the first principles of heat transfer and utilizes the temperature variation laws of material properties. Corroborating the numerical results with the experimental results, some impor…
Transformation of Construction Cement to a Self-Healing Hybrid Binder
2019
A new biomimetic strategy to im prove the self-healing properties of Portland cement is presented that is based on the application of the biogenic inorganic polymer polyphosphate (polyP), which is used as a cement admixture. The data show that synthetic linear polyp, with an average chain length of 40, as well as natural long-chain polyP isolated from soil bacteria, has the ability to support self-healing of this construction material. Furthermore, polyP, used as a water-soluble Na-salt, is subject to Na+/Ca2+ exchange by the Ca2+ from the cement, resulting in the formation of a water-rich coacervate when added to the cement surface, especially to the surface of bacteria-containing cement/c…
A Mechanical Approach for Evaluating the Distribution of Confinement Pressure in FRP-Wrapped Rectangular Columns
2019
In recent decades, fiber reinforced polymer (FRP) wrapping has become a common technique to retrofit reinforced concrete (RC) columns. Numerous research works have sought to verify analytically and experimentally its effectiveness in terms of enhancement of axial load bearing capacity and ductility. These studies highlighted that in the case of sharp-cornered sections, the maximum allowable confinement pressure is limited by premature failure at corners and, consequently, stress in the FRP, as well as the distribution of the confinement pressure, is not uniform. The prediction of this phenomenon is not straightforward, and existing theoretical studies propose complex numerical simulations, …
The role of extracellular polymeric substances (EPS) on aerobic granules formation: comparison between a case of synthetic wastewater supply and anot…
2017
The paper focused on the evolution and the comparison of the extracellular polymeric substances (EPSs) content during the granulation process in two Granular Sequencing Batch Airlift Reactors (GSBAR) (3,5 L) fed with synthetic (R1) and industrial wastewater (R2). The results showed that in both the reactors the EPSs, in particular proteins (PN), were mainly produced during the feast phase because of the high substrate availability, especially under conditions of metabolic stress. Then, the EPSs content reduced during the famine period, because of biodegradation by bacteria. More in detail, during the granulation process, a greater polysaccharides (PS) consumption occurred in both reactors, …
Evaluation of Antibacterial Efficacy of Photodynamic Therapy vs. 2.5% NaOCl against E. faecalis-infected Root Canals Using Real-time PCR Technique
2017
Background Bacteria like E. faecalis can produce intra- and extra-radicular biofilms. Theoretically, the adjustable penetration ability of lasers enables better access to root canal system. Therefore the aim of the present study was to compare the ability of photoactivated laser and 2.5% NaOCl irrigation solution to eliminate E. faecalis from the root canals by real-time PCR technique. Material and methods Sixty extracted human upper central incisors were selected and sterilized in an autoclave. The root canals were infected with E. faecalis (PTCC 1237, Persian Type Culture Collection, Iran) and then incubated for 24 hours. The samples were randomly divided into 3 groups. No intervention wa…
Hybrid Biopolymer and Lipid Nanoparticles with Improved Transfection Efficacy for mRNA
2020
Cells 9(9), 2034 (1-19) (2020). doi:10.3390/cells9092034
Engineering of a DNA Polymerase for Direct m6A Sequencing
2017
Methods for the detection of RNA modifications are of fundamental importance for advancing epitranscriptomics. N6-methyladenosine (m6A) is the most abundant RNA modification in mammalian mRNA and is involved in the regulation of gene expression. Current detection techniques are laborious and rely on antibody-based enrichment of m6A-containing RNA prior to sequencing, since m6A modifications are generally "erased" during reverse transcription (RT). To overcome the drawbacks associated with indirect detection, we aimed to generate novel DNA polymerase variants for direct m6A sequencing. Therefore, we developed a screen to evolve an RT-active KlenTaq DNA polymerase variant that sets a mark for…