Search results for " progettazione."
showing 10 items of 503 documents
Determination of Bubble Size Distribution Using Ultrasound Array Imaging
2020
In this article, ultrasonic phased arrays are deployed as an imaging tool for industrial process analysis. Such arrays are typically used for sonar, medical diagnosis, and nondestructive testing; however, they have not yet been applied to industrial process analysis. The precise positioning of array elements and high frequencies possible with this technology mean that highly focused images can be generated, which cannot currently be achieved using ultrasound tomography. This article aims to highlight the potential of this technology for the measurement of bubble size distribution (BSD) and to demonstrate its application to both intrusive and noninvasive process measurements. Ultrasound imag…
Laser ultrasonics for defect evaluation on coated railway axles
2020
Abstract This scientific paper focuses on the application of an advanced non-destructive technique for an effective inspection of railway axles. The method pertains to ultrasonic techniques, which are widely used in the railway field. The experimental investigation was carried out on simulated defects tooled near the cross section reduction of the axle, in order to simulate fatigue cracks which, due to notch effect, can trigger crack propagation and axle failure. The aim of this research activity is to evaluate how efficiently the proposed technique detects defects and to verify its applicability to axles with a black coating for protection. In view of the experimental setup, comprising a p…
Low-velocity impact behaviour of green epoxy biocomposite laminates reinforced by sisal fibers
2020
Abstract Due to its good mechanical characteristics, low cost and high availability in the current market, sisal fiber is one of the most used for the manufacturing of biocomposites in various industrial fields (automotive, marine, civil construction etc.). The particular sub-fibrillar structure of the sisal fiber (similar to aramid fibers) and the corresponding anisotropic behavior detected by recent research activities, suggest that such biocomposites should exhibit also high impact strength, in such a way to permit their advantageously use also for the manufacturing of crashworthy components (bumpers, helmets, protection systems etc.), that are at the same time also eco-friendly, lightwe…
Mechanical Properties of CNT/Polymer
2018
Abstract The high mechanical properties, the stiffness-to-weight and strength-to-weight make the carbon nanotubes a perfect reinforcing agents in advanced composites. This interesting potential has attracted the attention of both industry and academia that have committed to this research field an impressive amount of work. Several applications of carbon nanotubes enriched polymer composites have already been seen: aerospace structures, sporting goods, automotive components, medical devices, optical barriers, photovoltaic devices, conducting plastics, electromagnetic interference shielding, efficient electrostatic painting of plastics, composite mirrors, plastics with high thermal dissipatio…
Electrical conductance of carbon nanotubes with misaligned ends
2013
During a manufacturing process, when a straight carbon nanotube is placed on a substrate, e.g., production of transistors, its two ends are often misaligned. In this study, we investigate the effects of multiwall carbon nanotubes’ (MWCNTs) outer diameter and chirality on the change in conductance due to misalignment of the two ends. The length of the studied MWCNTs was 120 nm, while the diameters ranged between 4 and 7 nm. A mixed finite element-tight-binding approach was carefully designed to realize reduction in computational time by orders of magnitude in calculating the deformation-induced changes in the electrical transport properties of the nanotubes. Numerical results suggest that ar…
Frictional effect in mode II delamination: Experimental test and numerical simulation
2013
Abstract The present paper proposes an experimental and a numerical analysis of the frictional effect on the mode II delamination. Frictional stresses between the crack edges can absorb and dissipate significant energy contributions in the delamination zones, especially under cyclic loading conditions. The experimental tests are performed for a set of unidirectional End-Notched Flexure (ENF) composite specimens, which are subjected to fatigue loading law with increasing mean value. The numerical analyses are performed considering a cohesive–frictional constitutive model, which is able to reproduce the transition of the interface behavior from the sound elastic condition to the fully cracked…
Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation
2014
In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this structure with an orthotropic equivalent thick plate that reproduces the in plane and out of plane behaviour of the original geometry. Different validation procedures have been implemented to verify the quality of t…
Experimental analysis and micromechanical models of high performance renewable agave reinforced biocomposites
2017
Abstract The present work deals with the experimental study of high performance biocomposites reinforced with optimized agave fibers, as well as the successive implementation of reliable micromechanical models that can be used at the design stage. In detail, systematical experimental analyses performed on biocomposites with epoxy or PLA matrix, have permitted to highlight that for short fibers biocomposites the reinforcing leads to a significant improvement of the matrix stiffness, whereas the particular damage mechanism based essentially on the matrix failure with consequent tensile failure of the fibers aligned with the applied load, does not allow to obtain an actual reinforcing of the m…
Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites
2014
Abstract This work investigates the hydrothermal ageing behaviour of a carbon fibre reinforced laminate and its epoxy matrix in bulk conditions. A model DGEBA epoxy is employed, and water uptake and dynamic mechanical thermal (DMTA) analyses have been performed on both the composites and bulk resin. Fracture toughness of the bulk resin has been measured, evidencing a substantially unmodified critical stress intensity factor KIC, although the evidence of plasticisation effects given by DMTA. Interlaminar Mode I fracture toughness of the composite showed a variable trend towards slight decreases or slight increases, according to the prevailing toughening or embrittling mechanisms activated by…
Parameters influencing the stiffness of composites reinforced by carbon nanotubes – A numerical–analytical approach
2014
Abstract Due to their high stiffness and strength, as well as their electrical conductivity, carbon nanotubes are under intense investigation as fillers in polymer matrix composites. The nature of the carbon nanotube/polymer bonding and the curvature of the carbon nanotubes may strongly reduce the reinforcing effect of the carbon nanotubes when added to a matrix to create composites. Here the effects of carbon nanotube waviness and the interaction with the matrix on the stiffness of the composite are investigated. Using a mixed numerical–analytical model, a parametric study of the waviness and volume fraction influence of CNTs on the elastic behavior of the nanocomposite is presented. The m…