Search results for " reactor"
showing 10 items of 361 documents
Improving angle stability by switching shunt reactors in mixed overhead cable lines. An Italian 400 kV case study
2019
Stringent environmental constraints make the construction of new transmission overhead lines more and more difficult. Alternatively, today it is possible to use cable lines for high (HV) and extra-high (EHV) voltage systems. The configuration of the so-called mixed lines can create some problems in the operation of the electrical system, both during steady-state and transient conditions. In particular, the system stability is one of the main concerns when analyzing the dynamic response of power systems. In this paper, the study of angular stability of a system containing a mixed line is presented: a specific control logic applied to the shunt reactors of the mixed line is proposed as improv…
Natural Convection Cooling of a Hot Vertical Wall Wet by a Falling Liquid Film
2008
Abstract The system studied is a plane channel in which one of the two vertical walls is kept at an arbitrary temperature profile and may be partially or completely wet by a falling liquid film, while the opposite wall is adiabatic. Air from the environment flows along the channel with a mass flow rate which depends on the balance between hydraulic resistances and buoyancy forces. These latter, in their turn, depend on the distribution of temperature and humidity (hence, density) along the channel and eventually on the heat and mass transferred from wall and film to the humid air. A simplified computational model of the above system was developed and applied to the prediction of relevant qu…
Study of a water-cooled convective divertor prototype for the DEMO fusion reactor
2000
The plasma facing components of a fusion power reactor have a large impact on the overall plant design, its performance and availability and on the cost of electricity. The present work concerns a study of feasibility for a water-cooled prototype of the convective divertor component of the DEMO fusion reactor. The study has been carried out in two steps. In the first one thermal-hydraulic and neutronic parametric analyses have been performed to find out the prototype optimized configuration. In the second step thermo-mechanical analyses have been carried out on the obtained configuration to investigate the potential and limits of the proposed prototype, with a particular reference to the ma…
Two-Dimensional Modeling of a Flat-Plate Photocatalytic Reactor for Oxidation of Indoor Air Pollutants
2007
In this paper we present a two-dimensional (2-D) analysis of a narrow-slit, flat-plate, single-pass, flow-through photocatalytic reactor for air purification. The continuity equation for convection and diffusion in two dimensions, under un-steady-state conditions, was coupled with radiation field modeling and photocatalytic reaction kinetics to model the transient and steady-state behavior of the reactor. The model was applied to the photocatalytic oxidation of trichloroethylene (TCE) in humidified air streams under different experimental conditions. The kinetic parameters determined by a three-dimensional (3-D) computational fluid dynamics model of the reactor were used in the 2-D model si…
Model predictive control for continuous lactide ring‐opening polymerization processes
2020
International audience; Polylactic acid (PLA) is an attractive environment-friendly thermoplastic that is bio-sourced and biodegradable. PLA is industrially produced by the ring-opening polymerization of Lactide. This reaction is sensitive to drifts in the operating conditions and impurities in the raw materials that may affect the reaction rate as well as the polymer properties, which can be very costly in continuous processes. It is therefore crucial to employ a control strategy that allows recovering the nominal conditions and maintaining the desired properties and conversion level in case of drift. Three control strategies are discussed in this paper: Proportional-Integral controller (P…
MHD Free Convection in Helium-Cooled Lithium-Lead Blanket Modules for the Demonstration Fusion Reactor
2003
Integrated multi-physics design tool for fusion breeding blanket systems - development and validation
2020
Il Breeding Blanket (BB) del reattore DEMO rappresenta un sistema complesso in un ambiente pericoloso. Infatti, esso deve soddisfare diversi requisiti e vincoli ingegneristici sia di tipo nucleare, termo-strutturale che di sicurezza. Per questi motivi, è necessaria una progettazione omnicomprensiva che preveda l'applicazione di strumenti avanzati di simulazione basati su approcci multi-fisici. Questi strumenti devono eseguire simultaneamente diversi tipi di analisi. Tre di esse possono essere considerate prioritarie e propedeutiche per lo studio di tutti gli altri fenomeni riguardanti il BB, vale a dire l´analisi nucleare, termo-fluidodinamica e strutturale. In questa tesi, è proposto un in…
Eurofusion-DEMO Divertor - Cassette Design and Integration
2020
International audience; The Eurofusion-DEMO design will complete the Pre Conceptual Design phase (PCD) with a PCD Gate, named G1, scheduled to take place in Q4 2020 that will focus on assessing the feasibility of the plant and its main components prior to entering into the Conceptual Design phase. In the paper first an overview is given of the Eurofusion-DEMO Divertor Assembly including design and interface description, systems and functional requirements, load specification, system classification, manufacturing procedures and cost estimate. Then critical issues are discussed and potential design solutions are proposed, e.g.:- Neutron material damage limits of the different (structural) mat…
Shortcut nitrification-denitrification by means of autochthonous halophilic biomass in an SBR treating fish-canning wastewater
2017
Abstract Autochthonous halophilic biomass was cultivated in a sequencing batch reactor (SBR) aimed at analyzing the potential use of autochthonous halophilic activated sludge in treating saline industrial wastewater. Despite the high salt concentration (30 g NaCl L −1 ), biological oxygen demand (BOD) and total suspended solids (TSS), removal efficiencies were higher than 90%. More than 95% of the nitrogen was removed via a shortcut nitrification-denitrification process. Both the autotrophic and heterotrophic biomass samples exhibited high biological activity. The use of autochthonous halophilic biomass led to high-quality effluent and helped to manage the issues related to nitrogen removal…