Search results for " removal"

The effect of the solids and hydraulic retention time on moving bed membrane bioreactor performance

2018

Abstract The aim of the present paper was to investigate the effect of solids (SRT) and hydraulic (HRT) retention time on Integrated Fixed Film Activated Sludge (IFAS) University of Cape Town (UCT) membrane Bioreactor (MBR). In particular, three different pairs of SRT and HRT values were analysed, namely, Phase I 56 d/30 h, Phase II 31 d/15 h and Phase III 7 d/13 h. The short-term effect of these three SRT/HRT conditions was assessed by analysing several system performance indicators: organic carbon and biological nutrient (nitrogen and phosphorus) removal, biomass respiratory activity, activated sludge filtration properties and membrane fouling. The results showed that the decrease of SRT/…

Comparison of Two Mathematical Models for Greenhouse Gas Emission from Membrane Bioreactors

2017

In this study two mathematical models (Model I and Model II), able to predict the nitrous oxide (N2O) and carbon dioxide (CO2) emission from an University Cape Town (UCT) – membrane bioreactor (MBR) plant, have been compared. Model I considers the N2O production only during the denitrification. Model II takes into account the two ammonia-oxidizing bacteria (AOB) formation pathways for N2O. Both models were calibrated adopting real data. Results highlight that Model II had a better capability of reproducing the measured data especially in terms of N2O model outputs. Indeed, the average efficiency related to the N2O model outputs was equal to 0.3 and 0.38 for Model I and Model II respectively.

Diimidazolium-based supramolecular ionogels for dye removal from wastewaters

Synthesis, Characterization, and Study, of New Nanostructured Materials

Dense drug-eluting biodegradable Fe-Ag nanocomposites

2021

Abstract Biodegradable metals in orthopedics are aimed to eliminate secondary the surgical intervention for implant removal, and thus improve patient compliance, reduce surgery costs and the risk of infections. In addition, biodegradable implants could be loaded with different drugs to prevent the growth of pathogens and the development of bone infections, kill remaining cancer cells after tumor resection or stimulate bone regeneration. However, drugs undergo thermal decomposition under the conditions of conventional metal fabrication processes. In this work, we describe the fabrication of a dense drug-eluting biodegradable Fe-Ag nanocomposite containing 10 vol% of Ag and loaded with the an…

Cactus pear (O. ficus-indica (L.) Mill.) fruit production: Ecophysiology, orchard and fresh-cut fruit management

2015

Cactus pear (Opuntia ficus-indica L. Mill.) is cultivated in wide range of environments with the consequence of large differences in crop potential, orchard systems and management. These differences may be related to temperature and rainfall range (water availability) but also to the day/night length and, of course, to soil characteristics. This leads to considerable variability in the field and in fruit quality. Crop value much depends in crop variability in terms of fruit size, which is the major factor for fruit price in Europe. The increase of crop value very much depends on regular cultural practices such as irrigation and fruit thinning, but it is also dependent on plant crop yield an…

Combined effects of electric toothbrushing and dentifrice on artificial stain removal : an in vitro study

2018

This in vitro study aimed to clarify the combined effect of electric toothbrushing and dentifrice on the removal of artificial stain. Twenty-five bovine incisors were cut at the cervix and the crown was embedded in auto-cured acrylic resin. Specimens were abraded using #240 SiC paper to obtain a flat enamel surface, and 20 specimens were treated with 10% citric acid / 3% ferric chloride solution followed by 1% tannic acid solution to produce surface staining. They were divided into four groups: 1) brushing with an electric toothbrush and whitening dentifrice (group S+B); 2) brushing with an electric toothbrush and fluoride dentifrice (group S+C); 3) brushing with an electric toothbrush and …

Dentist´s knowledge, attitudes and determining factors of the conservative approach in teeth with reversible pulpitis and deep caries lesions

2018

Background The aim of this study was to investigate dentists` knowledge, attitudes and factors regarding the conservative approach in the management of deep caries lesions (DCLs) in teeth with reversible pulpitis. Material and methods 187 dentists were contacted directly or by mail, and 125 (67%) were finally included in the study. Dentists were requested to answer an open/discursive questionnaire about the routine approach to the diagnosis and treatment of DCLs, including knowledge-related attitudinal items. Results Total caries excavation was the preferred treatment option for more than 80% of dentists in case of DCL with reversible pulpitis. Only a small percentage (8%) chose partial car…

A methodology for sequencing batch reactor identification with artificial neural networks: A case study

2009

This paper presents a systematic methodology based on the application of artificial neural networks for sequencing batch reactor (SBR) identification. The SBR is a fill-and-draw biological wastewater technology, which is specially suited for nutrient removal. The proposed approach makes optimal use of the available data during the training stage and it is aimed at achieving high generalization ability. For this purpose, a wide range of experimental conditions, including different solids retention times and influent characteristics, has been used. The methodology is successfully applied to develop a soft-sensor for monitoring a laboratory-scale SBR operated for enhanced biological phosphorus…

DSC: software tool for simulation-based design of control strategies applied to wastewater treatment plants.

2011

This paper presents a computer tool called DSC (Simulation based Controllers Design) that enables an easy design of control systems and strategies applied to wastewater treatment plants. Although the control systems are developed and evaluated by simulation, this tool aims to facilitate the direct implementation of the designed control system to the PC of the full-scale WWTP (wastewater treatment plants). The designed control system can be programmed in a dedicated control application and can be connected to either the simulation software or the SCADA of the plant. To this end, the developed DSC incorporates an OPC server (OLE for process control) which facilitates an open-standard communic…