Search results for " solution"
showing 10 items of 3084 documents
Damping by Bulk and Shear Viscosity of Confined Acoustic Phonons for Nanostructures in Aqueous Solution
2007
International audience; A nanoparticle in aqueous solution is modeled as a homogeneous elastic isotropic continuum sphere in contact with an infinite viscous compressible Newtonian fluid. The frequencies and damping of the confined vibrational modes of the sphere are calculated for the material parameters of a CdSe nanoparticle in water and a poly(methyl methacrylate) nanosphere in water. Although the effects of viscosity are found to be negligible for macroscopic objects, for nanoscale objects, both the frequency and damping of the vibrational modes are significantly affected by the viscosity of the liquid. Furthermore, both shear viscosity and bulk viscosity play an important role. A mode…
Traversing Phase Fields towards Nanosized Beta Tricalcium Phosphate
2013
The difficulty of beta tricalcium phosphate (β-TCP) crystallization in aqueous media opens the question whether β-TCP can be produced using an alternative pathway. Amorphous calcium phosphate (ACP) is metastable in an aqueous environment and prefers a more stable apatite phase. Others have transformed a crystallized calcium deficient hydroxyapatite (Ca-def HAp) into β-TCP, but automatic transformation from ACP to Ca-def HAp followed by transformation to β-TCP has not been addressed. This work shows the formation of Ca-def HAp after different aging times of ACP and the subsequent transition to β-TCP. An amorphous phase with a Ca/P ratio of 1.5 was synthesized, rinsed, filtered and excess flu…
Abatement of 1,1,2,2-tetrachloroethane in water by reduction at silver cathode and oxidation at boron doped diamond anode in micro reactors
2012
The treatment of aqueous solutions of 1,1,2,2-tetrachloroethane was performed by anodic oxidation at boron doped diamond (BDD), cathodic reduction at silver and coupled processes. Experiments were performed in macro and micro reactors with an interelectrode distance lower than 100. μm. Drastically higher abatements of the chlorinated compound and current efficiencies were obtained in microdevices that, furthermore, allowed to perform the electrolyses with low cell voltages in the absence of supporting electrolyte. When reduction and oxidation processes were carried out simultaneously in the microreactor, a higher abatement of pollutants was obtained with the same amount of the passed charge…
Mesosynthesis of ZnO-SiO(2) porous nanocomposites with low-defect ZnO nanometric domains.
2011
Silica-based ZnO-MCM-41 mesoporous nanocomposites with high Zn content (5≤Si/Zn≤50) have been synthesized by a one-pot surfactant-assisted procedure from aqueous solution using a cationic surfactant (CTMABr = cetyltrimethylammonium bromide) as structure-directing agent, and starting from molecular atrane complexes as inorganic hydrolytic precursors. This preparative technique allows optimization of the dispersion of the ZnO nanodomains in the silica walls. The mesoporous nature of the final materials is confirmed by x-ray diffraction (XRD), transmission electron microscopy (TEM) and N(2) adsorption-desorption isotherms. The ZnO-MCM-41 materials show unimodal pore size distributions without …
Nanoparticles Built of Cross-Linked Heterotelechelic, Amphiphilic Poly(dimethylsiloxane)-b-poly(ethylene oxide) Diblock Copolymers
2000
Novel short chain α,ω-heterotelechelic amphiphilic poly(dimethylsiloxane)-b-poly(ethylene oxide) diblock copolymers (PDMS−PEO) with total molecular weights below 10 000 g/mol are synthesized, characterized, and used as basic constituent parts for functionalized nanoparticles. The self-assembly of the amphiphilic diblock copolymer in water as a solvent selective for the PEO block leads to the formation of spherical and cylindrical micellar structures with diameters between 10 and 25 nm. The core of the micelles is built of the hydrophobic PDMS chains, whereas the corona is set up by the hydrophilic PEO blocks. By using α,ω-heterotelechelic diblock copolymers, it is possible to fix the core o…
UV-tunable upper critical solution temperature behavior of azobenzene containing poly(methyl methacrylate) in aqueous ethanol
2015
A series of azobenzene containing copolymers were synthesized by post-modification of poly(methyl methacrylate-co-pentafluorophenyl methacrylate) with an amine-functionalized azobenzene. Light- and thermo-responsive behavior of these copolymers was investigated in ethanol–water solvent mixtures with various amounts of ethanol. The upper critical solution temperature (UCST) of the polymer solutions, resulting from the poly(methyl methacrylate), was found to be highly tunable by the substitution degree of the copolymers as well as the ethanol content of the solvent mixture. In addition, the copolymers are light responsive based on the cis–trans isomerization of the azobenzene group under UV i…
Rheological characterization and release properties of inulin-based hydrogels
2012
Abstract In the present study the rheological properties of hydrogels obtained through UV irradiation of an aqueous solution of methacrylated inulin (INUMA) alone or in the presence of four different crosslinkers, have been recorded as a function of irradiation time, at two different wavelengths (320 and 365 nm) and fixed frequency and amplitude by oscillatory experiments. Each hydrogel has been analyzed by measurements of the frequency-dependency of the elastic modulus, G ′, in the linear viscoelastic region. The amount of polymeric chains giving an elastic response has been correlated to the chemical nature of the crosslinker used together with INUMA. Finally the release properties of the…
Morphology, physical properties, silver release, and antimicrobial capacity of ionic silver-loaded poly(l-lactide) films of interest in food-coating …
2014
In the present study, silver ions were incorporated into a poly-(l-lactide) (PLA) matrix by a solvent casting technique using different solvents and glycerol as plasticizer. The effect of the different formulations on the morphology, thermal, mechanical and color properties were first evaluated. Additionally, a thorough study of the silver ions release to an aqueous environment was also monitored over time by anodic stripping voltammetry and correlated with the antimicrobial performance against S. enterica. The incorporation of silver contents of up to 1 wt % did not affect morphology, thermal or mechanical properties of the films. A sustainable, antibacterial effectiveness was found for th…
Effective low temperature reduction of graphene oxide with vanadium(iii)
2014
Reduction of graphene oxide (GO) with vanadium(III) trichloride under various reaction conditions has been investigated. The results show that V(III) can be used as an efficient reducing agent for GO in aqueous solutions at low concentrations and in moderate temperatures under ambient conditions. The IR spectroscopy and X-ray photoelectron spectroscopy (XPS) show that the structure of the vanadium-reduced material is similar to reduced graphene oxide prepared using TiCl3 or hydrazine as a reducing agent. The electrical conductivity of the material is also similar in all cases. However, on the basis of the XPS results, vanadium-based reduction does not leave significant reductant impurities …
Water-soluble carbon nanotubes through sugar azide functionalization
2011
In this work we report a covalent functionalization of pristine single-walled carbon nanotubes (SWCNTs) directly with three sugar azides, 2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl, 2,3,4,6-tetra-O-acetyl-β-d-galactopyranosyl or 2,3,4,6-tetra-O-acetyl-β-d-mannopyranosyl azide. Microwave-assisted functionalization was carried out for SWCNTs prepared with the HiPCO method. The as-prepared, new type of sugar-functionalized SWCNTs were analyzed by Raman and IR spectroscopy. Deacetylation of the functionalized tubes by sodium methoxide yielded nitrogen-linked, sugar-functionalized carbon nanotubes (CNTs) that formed stable dispersions in water. Reactivity of the sugar azides towards SWCNTs was es…