Search results for " solution"
showing 10 items of 3084 documents
Bond strength dependent superionic phase transformation in the solid solution series Cu2ZnGeSe4−xSx
2014
Recently, copper selenides have shown to be promising thermoelectric materials due to their possible superionic character resulting from mobile copper cations. Inspired by this recent development in the class of quaternary copper selenides we have focused on the structure-to-property relationships in the solid solution series Cu2ZnGeSe4−xSx. The material exhibits an insulator-to-metal transition at higher temperatures, with a transition temperature dependent on the sulfur content. However, the lattice parameters show linear thermal expansion at elevated temperatures only and therefore no indication of a structural phase transformation. 63Cu nuclear magnetic resonance shows clear indications…
Enhanced thermoelectric properties of the n-type Magnéli phase WO2.90: reduced thermal conductivity through microstructure engineering
2014
The thermoelectric properties of the Magneli phase WO2.90 were investigated, with special attention to how the thermoelectric performance can be altered by changing its microstructure. Spark plasma sintering (SPS) allowed the direct preparation of large amounts of consolidated material. Adding Ta2O5 to the reaction mixture lead to the formation of solid solutions W1−xTaxO2.90via a concurrent reaction between WO3 and Ta2O5 during the SPS treatment. In addition, micron-sized inclusions containing tungsten surrounded by WOx embedded in a WO2.90 matrix were formed, which act as additional scattering centers. As a result, the thermal conductivity of the Ta-containing samples was reduced by ≈30% …
Electrodeposition of supported gadolinium-doped ceria solid solution nanowires
2012
Gadolinium-ceria solid solution nanowires with tunable composition have been prepared through template cathodic electrodeposition from solutions containing Ce 3+Gd 3+ in a variable ratio. The employed template is Porous Anodic Alumina because it can function as thermal resistant separator supporting the nanowires if used as ionic conductor in Solid Oxide Fuel Cell (SOFC). Scanning Electron Microscopy of the deposited nanostructures revealed that the use of ethanol as solvent and metal chloride as electrolyte allowed to prepare continuous, compact and well defined nanowires with morphological features stable even after thermal treatment. EDX compositional analysis confirms the presence of bo…
Ab initio thermodynamic study of (Ba,Sr)(Co,Fe)O3 perovskite solid solutions for fuel cell applications
2013
(Ba,Sr)(Co,Fe)O3 (BSCF) perovskite solid solutions are promising materials for solid oxide fuel cell cathodes and oxygen permeation membranes. Cathode performance strongly depends on the morphology of these materials remaining as a single phase or two-phase mixture. Combining ab initio calculations of the atomic and electronic structure of different supercells with thermodynamics of solid solutions, we have constructed and discussed phase diagrams of several important BSCF chemical compositions. It is demonstrated that in BSC cobaltite solid solution the spinodal decomposition may occur already at relatively low temperatures, while ferrite (BSF and SCF) solid solutions decompose at relative…
Rietveld refinement study of vanadium distribution in V+4–ZrSiO4 solid solutions obtained from gels
2002
Abstract Vanadium-containing zircon gel precursors with nominal compositions Vx–ZrSiO4 with x=0.0, 0.004, 0.01, 0.04 and 0.2 were prepared by a previously reported colloidal sol-gel technique and annealed for 30 h at 1400 °C. The Rietveld refinement of the structures by X-ray powder diffraction confirms previous results concerning the limit of solubility of V+4 in the zircon structure. The new finding regarding with the entry of V+4 in the Zr+4 site for zircon doped with high contents of vanadium is in accordance with reported results.
Structural and Electric Properties of Sodium Lithium Niobate Ceramic Solid Solution Li0.08Na0.92NbO3
2011
A lead-free solid solution Li0.08Na0.92NbO3 was prepared by a two-stage hot-pressing technology. The structure and morphology of Li0.08Na0.92NbO3 were characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The studies of electric conductivity were performed depending on temperature and frequency of electric measuring field on heating and cooling processes. These measurements revealed that the a.c. conductivity changed with the frequency according to the formula: σ(ω)=σ dc +Aω n where n < 1. These results were discussed considering the conduction mechanism as a type of polaron hopping.
Data on phase and chemical compositions of black sands from “El Ostional” beach situated in Mompiche, Ecuador
2020
Abstract Data revealing the phase and chemical compositions of natural black sands from “El Ostional” beach, located in the northern Ecuadorian Pacific coast have been presented. The samples were collected from six points over the shore area of approximately 500 × 40 m2. The data on crystalline phases (iron titanium oxide, orthoclase feldspar and zircon) were determined by X-ray powder diffraction (XRPD), while semi-quantitative chemical analyses of major (Fe and Ti) and trace elements were obtained by X-ray fluorescence spectroscopy (XRF). The phase composition was verified by scanning electron microscopy (SEM), using backscattered electron (BSE) mode and energy dispersive spectroscopy (ED…
Alumina supported Pt(1%)/Ce0.6Zr0.4O2 monolith: Remarkable stabilization of ceria–zirconia solution towards CeAlO3 formation operated by Pt under red…
2009
Abstract A structured Pt(1 wt%)/ceria–zirconia/alumina catalyst and the metal-free ceria–zirconia/alumina were prepared, by dip-coating, over a cordierite monolithic support. XRD analyses and Rietveld refinements of the structural data demonstrate that in the Pt supported catalysts ceria–zirconia is present as a Ce 0.6 Zr 0.4 O 2 homogeneous solid solution and that the deposition over the cordierite doesn’t produce any structural modification. Moreover no Pt sintering occurs. By comparing the XRD patterns recorded on Pt/ceria–zirconia/alumina and ceria–zirconia/alumina after three redox cycles, it results that Pt, favouring the structural reorganization of the ceria–zirconia into one cubic …
Dopant solubility in ceria: alloy thermodynamics combined with the DFT+U calculations
2018
This research was partly funded by the Russian Science Foundation (under the project 14-43-0005) and ERA-NET HarvEnPiez project, with the computer resources provided by Stuttgart Supercomputing Centre (Project DEFTD 12939). A. C. also acknowledges financial support from the University of Latvia Foundation (Arnis Riekstins’s ‘‘MikroTik’’ donation). Authors thank R. Merkle, A. Popov for fruitful discussions.
Effects of CuO doping on structure, microstructure and dielectric properties of BaTiO3–PbTiO3 solid solution
2019
Ba0.7Pb0.3TiO3 and Ba0.7Pb0.3TiO3+yCuO (y = 0.1 wt%, 0.5 wt%, 1 wt% and 3 wt%) samples were prepared by a solid state reaction method. High purity raw materials were used. Structural properties of the sintered pellets were studied by X-ray diffractometer X’Pert PRO (PANalytical). A single phase of perovskite structure with tetragonal phase was identified at room temperature. The surface morphology of the obtained specimens was characterized by the scanning electron microscopy (Hitachi S4700). The investigations has shown that the synthesized ceramic materials are characterized by the high density, homogeneity of microstructure and low porosity. Dielectric spectroscopy was used to study the …