Search results for " thermal analysis"
showing 10 items of 91 documents
A Comprehensive Thermogravimetric Analysis Multifaceted Method for the Exact Determination of the Composition of Multifunctional Metal‐Organic Framew…
2020
Thermogravimetric analysis (TGA) has been widely used as a tool to characterise the composition of materials such as Metal-Organic Frameworks (MOFs). However, given their multifunctionality and structural complexity, examples of detailed methodologies for the exact calculation of the composition of complex MOF structures and MOF composites are lacking in the literature. Herein, we introduce a new straightforward methodology – based on the experimental ratio between the mass of a structure and its residue – for the exact calculation of the composition of almost any MOF material. We provide a detailed guide for the application of our methodology to different MOF materials, including MOFs in w…
Improving thermoelectric performance of TiNiSn by mixing MnNiSb in the half-Heusler structure
2016
The thermoelectric properties of n type semiconductor, TiNiSn is optimized by partial substitution with metallic, MnNiSb in the half Heusler structure. Herein, we study the transport properties and intrinsic phase separation in the system. The Ti1-xMnxNiSn1-xSbx alloys were prepared by arc-melting and were annealed at temperatures obtained from differential thermal analysis and differential scanning calorimetry results. The phases were characterized using powder X-ray diffraction patterns, energy dispersive X-ray spectroscopy, and differential scanning calorimetry. After annealing the majority phase was TiNiSn with some Ni rich sites and the minority phases was majorly Ti6Sn5, Sn, and MnSn2…
Thermal studies of sulphonamide derivative complexes
1991
Abstract A thermal study of a new series of acetazolamidate complexes of Co(II), Ni(II) and Cu(II) using the TG, DTG and DTA techniques in flowing air, static air and N 2 atmospheres is described. From the TG-DTG and DTA curves, different thermal behaviours can be observed. Although in all the complexes the processes of dehydration, deammination and pyrolysis can be clearly observed, in some cases they appear as several well-separated steps and, in others, as continuous stages which take place simultaneously. The differences observed between the pyrolytic decomposition in flowing air and in nitrogen are described. In flowing air, metal sulphate is formed from the thiadiazole ring, except fo…
Development of a new peat-based oil sorbent using peat pyrolysis
2013
The growing use and transport of crude oil and oil products has led to increasing numbers of oil spillages of various scales. Oil sorbents have been extensively used for remediation of the consequences of such accidents. The aim of this study is to investigate the possible use of peat and its thermal treatment products for oil sorption. Peat as an oil sorbent has poor buoyancy characteristics, relatively low oil sorption capacity and low hydrophobicity. However, thermal treatment (low-temperature pyrolysis and synthesis of peat-based activated coal) helps to significantly improve its sorptive characteristics. Peat is a potential material for oil sorption because it has such advantages as lo…
Powder X-Ray Diffraction Investigation of Xylazine Hydrochloride Solid Phase Transformation Kinetics
2013
The kinetics of the solid-state phase transformation of xylazine hydrochloride form X to A has been investigated using powder X-ray diffraction and differential thermal analysis. Three different kinetic models have been used to describe transition kinetics: the Avrami–Erofeev equation, the Cardew equation, and the methodology for simulation of solid-state phase transition kinetics by the combination of nucleation and nuclei growth processes. The latter has been recently developed and has been tested in this paper for the case of a real solid-state transition. The relative humidity, mechanical pressure, temperature, and sample-preparation effect on phase-transition kinetics have been investi…
A novel approach to prevent graphene oxide re-aggregation during the melt compounding with polymers
2015
Abstract The technology for the preparation of polymer-GO nanocomposites was investigated by studying the structure-properties relationships of two different systems, based on PA6 and EVA, fabricated by using different preparation methods, i.e. melt mixing, wet phase inversion, and the combination of the two. The morphology of nanocomposites resulted dramatically influenced by the technique adopted and showed to be the critical variable affecting the physical properties of the materials. Finally, the mechanical and dynamic-mechanical of the nanocomposites were improved by using the hybrid technique combining the two procedures.
Ni-containing spinel aluminates glass-ceramic materials obtained from cordieritic bulk glasses
2003
Monolithic glasses with compositions 2MO � 2Al2O3 � 5SiO2, being M ¼ Ni and equimolar mixtures of Ni and Mg, were prepared at 1650 C by melting mixtures of raw materials. The crystallization of monoliths was produced by heattreatment at several temperatures up to 1200 C. The crystallization sequence was followed by differential thermal analysis (DTA), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy dispersive X-ray (EDX) and diffuse reflectance spectroscopies. Surprisingly, the only crystalline phase formed after heating up to 1100 C was a nickel-containing aluminate spinel for both compositions. The microstructural characterization indicated t…
Effect of some additives on the development of spinel-based glass-ceramic glazes for floor-tiles
2005
Abstract The feasibility of developing spinel-based glass-ceramic glazes from a glass with composition in the system ZnO–MgO–B 2 O 3 –Al 2 O 3 –SiO 2 was examined. To do it additional fluxes and/or nucleants were added to a parent glass before melting. Pressed pellets of powdered glasses were submitted to standard thermal treatments up to 1200 °C. The crystallization path and the microstructural development at several temperatures were followed by several experimental techniques. The results showed that additions of TiO 2 as nucleant or additional B 2 O 3 as flux to the chosen glass favored the crystallization of cordierite or mullite as main crystalline phase. Glasses which also contained …
Novel Wireless Sensor System for Dynamic Characterization of Borehole Heat Exchangers
2011
The design and field test of a novel sensor system based in autonomous wireless sensors to measure the temperature of the heat transfer fluid along a borehole heat exchanger (BHE) is presented. The system, by means of two specials valves, inserts and extracts miniaturized wireless sensors inside the pipes of the borehole, which are carried by the thermal fluid. Each sensor is embedded in a small sphere of just 25 mm diameter and 8 gr weight, containing a transceiver, a microcontroller, a temperature sensor and a power supply. A wireless data processing unit transmits to the sensors the acquisition configuration before the measurements, and also downloads the temperature data measured by the…
Effect of electrolytical hydrogenation on the thermal stability and crystallization kinetics of METGLASS MBF-50
2007
The effect of electrolytical hydrogenation on both the surface and volume crystallization kinetics and thermal stability of amorphous alloy METGLASS MBF-50 has been investigated. The surface crystallization has been investigated by the exoelectron emission (EEE) technique, whereas the volume crystallization has been followed by differential thermal analysis (DTA). It has been found that both the surface and volume crystallization of investigated material occur in two stages. The surface crystallization occurs at temperature lower and with activation energy distinctly smaller than the volume crystallization. Hydrogenation of the investigated metallic glass enhances its thermal stability by i…