Search results for " titanium"
showing 10 items of 126 documents
N-TiO2 Photocatalysts highly active under visible irradiation for NOX abatement and 2-propanol oxidation
2013
N-doped TiO2 powders were prepared by two different sol-gel methods. Samples were characterised by X-ray diffraction (XRD), BET specific surface area measurements (SSA), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Electron Paramagnetic Resonance (EPR). XPS measurements revealed a signal at 400 eV assignable to nitrogen in the form of Ti-N-O. EPR signals are attributed to molecular NO trapped with cavities/defects possibly interacting with oxygen vacancies. The photocatalytic activity under UV and visible light was determined following the abatement of NOx and the photodegradation of 2-propanol in gas-solid systems. N…
Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel "cold" and "hot" nanosoldering of Au and TiO2 nanoparticles…
2011
Abstract A novel approach to synthesize Au/TiO2 nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO2 nanoparticles are merely mixed at room temperature or laser irradiated after mixing. Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO2 nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO2 nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slowe…
Cell and tissue response to nanotextured Ti6Al4V and Zr implants using high-speed femtosecond laser-induced periodic surface structures
2019
In this paper, the effect of femtosecond laser nanotexturing of surfaces of Ti6Al4V and Zr implants on their biological compatibility is presented and discussed. Highly regular and homogeneous nanostructures with sub-micrometer period were imprinted on implant surfaces. Surfaces were morphologically and chemically investigated by SEM and XPS. HDFa cell lines were used for toxicity and cell viability tests, and subcutaneous implantation was applied to characterize tissue response. HDFa proliferation and in vivo experiments evidenced the strong influence of the surface topography compared to the effect of the surface elemental composition (metal or alloy). The effect of protein adsorption fro…
The effect of prepolymerization of a titanium catalyst on its deactivation in propylene polymerization
1997
Propylene polymerization rate was investigated in the presence of anunsupported titanium catalyst (TiCl3) that had been modified with a Lewis base (di-n-butyl ether) and activated (precat), or not activated (cat), by being used in a suspension prepolymerization (70°C, 0.6 MPa) of an identical monomer. The initial polymerization rate was higher with the precat than with the cat catalyst. Prepolymerization was also found to enhance the kinetic stability of catalyst's active sites, presumably by reason of the prepolymerization-induced modification of catalyst's morphology. Deactivation rate constants were evaluated for the active sites of either catalyst examined.
Kinetic studies of two-step polymerization of propylene over a titanium-aluminum catalyst
1997
The influence was studied of the modification of an unsupported titanium-aluminum catalytic system with an internal Lewis base incorporated, via prepolymerization, on the activity of this system in propylene polymerization. In order to clarify the reasons for the activating effect of prepolymerization, comparative studies were carried out on the kinetics of polymerization catalyzed by a titanium system and its prepolymerized counter part. Based on the kinetic model suggested for the polymerization mechanism, the concentration of active sites and rate constants were determined for chain propagation, chain transfer and termination reactions. The following conclusions were deduced: (i) the ini…
Assessment of the electrochemical behaviour of Nickel-Titanium-based orthodontic wires: Effect of some natural corrosion inhibitors in comparison wit…
2019
Background The aim of this study is to assess the corrosion resistance behaviour of Nickel-Titanium-based orthodontic wires (NiTi) in different concentrations of Sodium Fluoride (NaF) and the corrosion's inhibitory effect of the extracts of some medicinal plants (essential oils, hydrosols and extract). Material and methods In this study we used NiTi (3M) and CuNiTi (ORMCO, 35°C, California) orthodontic wires. The following electrolytes were prepared: Lactate Ringer solution with additions of 0.1%, 0.5% or 1% of Sodium Fluoride and the extracts of different plants: Artemisia, Syzygium aromaticum (Clove) and Celtis australis. Corrosion resistance was studied using anodic potentiodynamic polar…
Very high titanium content mesoporous silicas
2001
Titanium content in mesoporous titanosilicate catalysts has been modulated up to a minimum Si/Ti value of 1.9 by using complexing agents able to coordinate both Si and Ti atoms and harmonize the reactivity of the resulting precursors avoiding subsequent phase segregation and leading to chemically very homogeneous materials. El Haskouri, Jamal, Jamal.Haskouri@uv.es ; Beltran Porter, Aurelio, Aurelio.Beltran@uv.es ; Beltran Porter, Daniel, Daniel.Beltran@uv.es ; Amoros del Toro, Pedro Jose, Pedro.Amoros@uv.es
Sealing ability of lateral compaction and tapered single cone gutta-percha techniques in root canals prepared with stainless steel and rotary nickel …
2011
Objectives: The aim of this study was to evaluate the sealing ability of lateral compaction and tapered single cone gutta-percha techniques in root canals prepared with stainless steel and rotary nickel titanium root canal instruments by fluid filtration method. Study design: The root canals were prepared with stainless steel (SS) and nickel titanium (NiTi) instruments. The canals prepared with SS were obturated with lateral compaction technique using .02 tapered cones and the canals prepared with NiTi instruments were obturated with lateral compaction technique using .02 tapered cones or 06 tapered single cones. The amount of leakage was evaluated by fluid filtration model. The results wer…
Friction Stir Welding as an Effective Alternative Technique for Light Structural Alloys Mixed Joints
2014
Abstract The increasing use of structural light alloys in the aeronautical, automotive and transportation industry is pushing researchers to find new solutions for the production of innovative components. Mixed joints made out dissimilar alloys represent a challenge for engineers to the difficulties arising in welding materials characterized by significantly different mechanical, thermal and chemical properties. In the paper, an overview of the most used process to produce dissimilar joints of aluminum, magnesium and titanium is given. Both fusion based and solid state welding processes can be used. Although the joining of these materials is possible, particular attention must be taken to t…
Influence of the composition of titanium oxynitride layers on the fretting behavior of functionalized titanium substrates: PVD films versus surface l…
2014
International audience; Abstract In this work we compared the fretting behavior of pure titanium plates functionalized with titanium oxynitride surface layers, obtained by two methods: a Physical Vapor Deposition (PVD) method, reactive magnetron sputtering, and Surface Laser Treatments (SLT), under different mixtures of oxygen and nitrogen. The composition of the layers was determined by nuclear reaction analysis (NRA) and their structure was analyzed by Raman spectroscopy. PVD layers were TiN-like fcc layers, with an oxygen concentration going from 36 to 50 at.%. Three SLT layers were studied. The first one was a TiN-like layer containing ~28 at.% of oxygen. The second one was formed of di…