Search results for " wastewater treatment"
showing 10 items of 79 documents
Effect of the air pressure on electro-Fenton process
2019
Electro-Fenton process is considered a very promising tool for the treatment of waste waters contaminated by organic pollutants refractant or toxic for microorganisms used in biological processes [1-6]. In these processes H2O2 is continuously supplied to an acidic aqueous solution contained in an electrolytic cell from the two-electron reduction of oxygen gas, directly injected as pure gas or bubbled air. Due to the poor solubility of O2 in aqueous solutions, two dimensional cheap graphite or carbon felt electrodes give quite slow generation of H2O2, thus resulting in a slow abatement of organics. In this context, we report here a series of studies [7-9] on the effect of air pressure on the…
Characterization of activated sludge settling properties with a sludge collapse-acceleration stage
2019
Abstract The sedimentability of the activated sludge can be affected by the presence of a large variety of coagulants and polymers from a previous physical-chemical process. In this paper, the activated sludge settling process in industrial wastewater treatment plants where the sludge does not settle in a conventional way is studied. The two observed constant hindered settling velocity stages and the instant the intermediate sludge acceleration period occurs are described. A variation of the Richardson and Zaki model is used to characterize the two stages of constant settling velocity. The concentration of suspended solids, where a sudden decrease of hindered settling velocity was observed,…
Electrochemical Treatment of Wastewater by ElectroFenton, Photo-ElectroFenton, Pressurized- ElectroFenton and Pressurized Photo ElectroFenton: A Firs…
2021
In the last few years increasing attention has been devoted to the utilization of electroFenton (EF) and EF based technologies for the treatment of wastewater polluted by recalcitrant organics. It has been shown that the performances of EF can be strongly improved using ultraviolet (UV) irradiation, e.g., by the photo-electroFenton (PEF) method, or pressurized air or oxygen, e.g., by the pressurized-electroFenton (PrEF) one. Although several studies were carried out on the degradation of many organic pollutants using EF, PEF or PrEF, a systematic comparison between PEF and PrEF was never reported as well as the possibility to couple the irradiation with pressurized air. In this study the pe…
Water Resource Recovery Facilities (WRRFs): The Case Study of Palermo University (Italy)
2021
The wastewater sector paradigm is shifting from wastewater treatment to resource recovery. In addition, concerns regarding sustainability during the operation have increased. In this sense, there is a need to break barriers (i.e., social, economic, technological, legal, etc.) for moving forward towards water resource recovery facilities and demonstration case studies can be very effective and insightful. This paper presents a new water resource recovery case study which is part of the Horizon 2020 EU Project “Achieving wider uptake of water-smart solutions—Wider Uptake”. The final aim is to demonstrate the importance of a resource recovery system based on the circular economy concept. The r…
A mathematical model for wastewater modification processes assessment in a stabilization reservoir
2012
The paper presents a mathematical model for the simulation of the ecological status of a wastewater stabilization reservoir (WSR). WSRs are hypertrophic aquatic systems devoted to storage of water resources in warm countries where shortage conditions have quite often to be faced. Several factors that affect the stabilization reservoir effluent quality were taken into account: hydraulics and hydrology, solar radiation, atmospheric reaeration, algae, zooplankton, organic matter, pathogen bacteria, and sediment-water interaction. The model quantifies the specific influence of each factor on effluent quality, evaluating the correlation between the different considered factors. State variables i…
Roadmapping the Transition to Water Resource Recovery Facilities: The Two Demonstration Case Studies of Corleone and Marineo (Italy)
2022
The current exploitation of freshwater, as well as the significant increase in sewage sludge production from wastewater treatment plants (WWTPs), represent nowadays a critical issue for the implementation of sustainable development consistent with the circular economy concept. There is an urgent need to rethink the concept of WWTPs from the conventional approach consisting in pollutant removal plants to water resource recovery facilities (WRRFs). The aim of this paper is to provide an overview of the demonstration case studies at the Marineo and Corleone WRRFs in Sicily (IT), with the final aim showing the effectiveness of the resources recovery systems, as well as the importance of plant o…
Environmental assessment of the Sibiu County, Romania: proposal for sewage sludge and OFMSW management
2017
The aim of the work is to assess current solid waste management (SWM) and wastewater treatment (WWT) in the county of Sibiu, Romania. Sibiu is a region where industrialization and tourism are spreading constantly, while pollution monitoring and the introduction of circular economy (CE) principles are still lacking. The environmental issues are mostly due to the absence of reliable sanitation systems, in particular for what concerns sewage sludge treatment. Moreover, Organic fraction from selective collection of municipal solid waste is still missing, since it is disposed of directly to landfill, increasing environmental pollution and contributing considerably to global warming. As a result,…
Biosorption of lead(II), zinc(II) and nickel(II) from industrial wastewater by Stenotrophomonas maltophilia and Bacillus subtilis
2015
Abstract The biosorption of Pb(II), Zn(II) and Ni(II) from industrial wastewater using Stenotrophomonas maltophilia and Bacillus subtilis was investigated under various experimental conditions regarding pH, metal concentration and contact time. The optimum pH values for the biosorption of the three metals were in the range 5.0-6.0, while the optimal contact time for the two bacterial species was 30 min. Experimental data was analyzed using Langmuir and Freundlich isotherms; the former had a better fit for the biosorption of Pb(II), Zn(II) and Ni(II). The maximum adsorption uptakes (qmax) of the three metals calculated from the Langmuir biosorption equation for S. maltophilia were 133.3, 47.…
Microbial Fuel Cell with Ni–Co Cathode Powered with Yeast Wastewater
2018
Wastewater originating from the yeast industry is characterized by high concentration of pollutants that need to be reduced before the sludge can be applied, for instance, for fertilization of croplands. As a result of the special requirements associated with the characteristics of this production, huge amounts of wastewater are generated. A microbial fuel cell (MFC) forms a device that can apply wastewater as a fuel. MFC is capable of performing two functions at the same time: wastewater treatment and electricity production. The function of MFC is the production of electricity during bacterial digestion (wastewater treatment). This paper analyzes the possibility of applying yeast wastewate…
Correlation of wood-based components and dewatering properties of waste activated sludge from pulp and paper industry.
2010
Large amounts of wet sludge are produced annually in municipal and industrial wastewater treatment. Already in pulp and paper industry, more than ten million tons of primary sludge, waste activated sludge, and de-inking sludge is generated. Waste activated sludge contains large quantities of bound water, which is difficult to dewater. Low water content would be a matter of high calorific value in incineration but it also has effects on the volume and the quality of the matter to be handled in sludge disposal. In this research waste activated sludges from different pulp and paper mills were chemically characterised and dewatered. Correlations of chemical composition and dewatering properties…