Search results for "0201 civil engineering"
showing 10 items of 242 documents
Influence of column shear failure on pushover based assessment of masonry infilled reinforced concrete framed structures: A case study
2017
Structural frames, constructed either of steel or reinforced concrete (RC), are often infilled with masonry panels. However, during the analysis of the structural frames, it has become common practice to disregard the existence of infills because of the complexity in modeling. This omission should not be allowed because the two contributions (of infills and of frames) complement each other in providing a so different structural system. The use of different modeling assumptions significantly affects the capacity as well as the inelastic demand and safety assessment. In specific, the adoption of equivalent diagonal pin-jointed struts leaves open the problem of the evaluation of the additional…
Macroelement Model for In-Plane and Out-of-Plane Responses of Masonry Infills in Frame Structures
2018
A new macroelement model is presented in this paper for the simulation of the in-plane (IP) and out-of-plane (OOP) response of infilled frames subjected to seismic actions. The model consists of two diagonal, one horizontal, and one vertical struts. Each strut is represented by two fiber-section beam-column elements. The model is able to capture the arching action of the wall under an OOP load as well as the interaction between the IP and OOP actions. The proposed modeling approach is sufficiently simple and efficient that it can be used for the static or dynamic analysis of an entire structural system. An experimental validation has been carried out. A further numerical study performed wit…
A simple model for the calculation of the axial load-carrying capacity of corroded RC columns
2015
In the present paper, a simplified model is used to determine the axial load-carrying capacity of compressed short reinforced concrete columns subjected to corrosion processes. The model considers members with circular and square cross-sections and accounts for—cover spalling, —concrete core confinement induced by transverse steel reinforcement, —buckling of longitudinal reinforcing bars. Strength reduction in concrete cover and core due to cracking induced by rust formation, reduction of steel area in longitudinal bars and transverse stirrups due to general and pitting corrosion and loss of confinement pressure are considered. The load-carrying capacity and load-axial strain curves here ge…
Shear and flexural strength prediction of corroded R.C. beams
2017
Abstract The purpose of the work was the study of the structural safety of R.C. beams subjected to corrosion processes though the derivation of moment-curvature diagrams and moment-to-shear interaction diagrams. Normal-strength reinforced concrete beams with longitudinal bars in the presence of transverse stirrups and subjected to corrosion processed are considered. Experimental results available in the literature related to corrosion processes, for steel bars, crack openings and bond degradation due to rust formation are reviewed. Then analytical laws relating to crack opening, bond degradation with attack penetration depth, through a rearranged form of Faraday’s law, are presented. An ana…
Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons
2017
In this work, the second part of an experimental campaign investigating the efficiency of an alternative retrofitting method for increasing the flexural and/or shear capacity in reinforced concrete beams, based on the use of prestressed stainless steel ribbons and steel angles, is presented and analytically reproduced. This group of tests focuses on the ability of the adopted retrofitting method to improve the shear strength and ultimate deformation of reinforced concrete structural elements. As described in a companion paper, the adopted retrofitting method is alternative to traditional techniques of reinforced concrete retrofitting, being easy to install and usually reversible, and charac…
Advanced Strategies and Materials for Reinforcing Normal and Disturbed Regions in Brick Masonry Columns
2016
This work presents the results of an experimental investigation on the behavior of 42 solid clay brick masonry columns internally strengthened by fiber-reinforced polymer (FRP) fabrics or stainless steel grids placed in horizontal mortar joints. In some cases, every course, and in other cases, alternate courses were reinforced with steel grids, carbon, and basalt FRP fabrics. Monotonic compressive loading tests were carried out under concentric and eccentric loads. Eccentric tests were carried out by loading the specimens on a reduced area with respect to the entire cross section, producing a disturbed region (D-region). A detailed characterization of the constituent materials was made expe…
Ultrasonic inspection for the detection of debonding in CFRP-reinforced concrete
2017
Fibre-reinforced plastic (FRP) composites are extensively used to retrofit civil structures. However, the quality and the characteristics of the bond between the FRP and the structure are critical to ensure the efficacy of the retrofit. For this reason, effective non-destructive evaluation (NDE) methods are often necessary to assess the bonding conditions. This article presents an ultrasonic technique for detecting defects at the FRP-substrate interface. The technique uses the Akaike Information Criterion, to detect automatically the onset of the ultrasonic signals, and the novel Equivalent Time Lenght (ETL) parameter, to quantify the energy of the propagating ultrasonic signals along the i…
Fatigue and Healing Properties of Low Environmental Impact Rubberized Bitumen for Asphalt Pavement
2017
The addition of recycled tyre rubber as a modifier to enhance the mechanical properties of bitumen has proven to provide asphalt mixtures with better mechanical performance. However the rubberised bitumen presents the limitation of requiring higher manufacturing and compaction temperatures. This could be solved by subjecting the tyre rubber to sort of pre-treatments such as: Adding warm-mix additives and/or using partial devulcanisation. These solutions have the potential of lowering the overall environmental impact of the asphalt pavement, however it is still not clear whether these can be detrimental for the rubberized asphalt binder mechanical properties. This paper investigates the effe…
Stress transfer and failure mechanisms in steel-concrete trussed beams: Experimental investigation on slab-thick and full-thick beams
2018
Abstract This study presents the results of an experimental investigation on semi-precast Hybrid Steel Trussed-Concrete Beams (HSTCBs) for analyzing the failure modes and the stress transfer mechanism between concrete and embedded steel elements (plate and truss). The available literature presents previous studies carried out by the authors mainly focused on the understanding of the local transfer mechanism by means of push-out tests. Conversely, in this paper original the results of laboratory tests conducted on six specimens of full-size HSTCBs subjected to four-point bending, with variation in the shear span, are reported on. From these results, the authors are able to assess the failure…
Brick Masonry Columns Externally Wrapped with Steel Wires under Concentric and Eccentric Loads
2017
This paper discusses an experimental investigation of clay brick columns that are externally strengthened by steel wire collars wrapping the horizontal mortar joints. The study aims to prove the effectiveness of the proposed strengthening technique and detect the efficiency of different numbers of steel collars. Additionally, the effect of eccentric loading is investigated. This paper proves that an analytical expression available in the previous literature can be modified to provide the strength of the equivalent homogeneous cross section in simple compression. To this aim, the biaxial strength domain of the bricks is modified to account for the lateral pressure exerted by the steel collar…