Search results for "0204 chemical engineering"
showing 10 items of 273 documents
Particle Suspension in Vortexing Unbaffled Stirred Tanks
2016
Three-phase processes in which particle suspension has to be achieved in conjunction with gas dispersion are traditionally carried out in sparged, baffled stirred tanks. The operation of such tanks can suffer, however, from particles tending to block the sparger holes. A viable alternative might be provided by uncovered unbaffled stirred tanks (UUSTs), where gas self-injection can occur when the free-surface vortex reaches the impeller blades and gas bubbles begin to be ingested by the liquid. In this work, the particle suspension and liquid aeration performances in three-phase UUSTs were experimentally investigated and compared with relevant literature correlations concerning baffled syste…
Combined membrane and thermal desalination processes for the treatment of ion exchange resins spent brine
2019
Abstract The disposal of industrial wastewater effluents represents a critical environmental issue. This work focuses on the treatment of the spent brine produced by the regeneration of ion exchange resins employed for water softening. For the first time, a comprehensive techno-economic assessment and an analysis of the energy requirements of the treatment chain are carried out, via the simulation of ad hoc implemented models. The chain is composed of nanofiltration, double-stage crystallization and multi-effect distillation. The valuable product is the brine produced by the multi-effect distillation, which can be re-used for the regeneration. Therefore, the treatment chain’s economic feasi…
Techno-economic assessment of multi-effect distillation process for the treatment and recycling of ion exchange resin spent brines
2019
Abstract A treatment chain including nanofiltration, crystallization and multi-effect distillation (MED) is for the first time proposed for the treatment of an effluent produced during the regeneration of Ion Exchange resins employed for water softening. The goal is to recover the minerals and to restore the regenerant solution to be reused in the next regeneration cycle. MED is the most crucial unit of the treatment chain from an economic point of view. A techno-economic analysis on the MED unit was performed and a novel performance indicator, named Levelized Brine Cost, was introduced as a measure of the economic feasibility of the process. Different scenarios were analysed, assuming diff…
New considerations for modelling a MED-TVC plant under dynamic conditions
2019
Abstract The multiple-effect distillation (MED) technology is nowadays the most promising desalination process to be coupled with variable heat sources, thus leading to a more sustainable way to produce water. In order to prove the potential of this, it is of major interest to develop powerful modelling tools to predict the performance of this coupling. Only a few models have been presented so far. They show promising results but were based on some simplifying assumptions and non-physical constraints that could limit the analysis of the dynamic behaviour of a MED plant. This paper presents new considerations for the dynamic modelling of a MED plant associated with a thermal vapour compressi…
Fluid-structure interaction and flow redistribution in membrane-bounded channels
2019
The hydrodynamics of electrodialysis and reverse electrodialysis is commonly studied by neglecting membrane deformation caused by transmembrane pressure (TMP). However, large frictional pressure drops and differences in fluid velocity or physical properties in adjacent channels may lead to significant TMP values. In previous works, we conducted one-way coupled structural-CFD simulations at the scale of one periodic unit of a profiled membrane/channel assembly and computed its deformation and frictional characteristics as functions of TMP. In this work, a novel fluid&ndash
A Thermochromic Liquid Crystals Image Analysis technique to investigate temperature polarization in spacer-filled channels for Membrane Distillation
2013
The analysis of flow fields and temperature distributions is of paramount importance in the development and optimization of new spacer-filled channel geometries for Membrane Distillation modules. The literature reports only few studies on the experimental characterization of such channels and, to the authors’ knowledge, none of them presents local information concerning the temperature distribution on the membrane surface. In the present work, a non-intrusive experimental technique named TLC-IA-TP is presented: it is based on the use of Thermochromic Liquid Crystals (TLCs) and digital Image Analysis (IA) and it is applied here for the first time to the analysis of Temperature Polarization (…
Modelling and cost analysis of hybrid systems for seawater desalination: Electromembrane pre-treatments for Reverse Osmosis
2019
Abstract The need to reduce energy consumption in seawater Reverse Osmosis (RO) process has pushed research towards the development of new hybrid systems in which, for example, other membrane processes can be used to pre-treat seawater. Electrodialysis (ED) and Reverse Electrodialysis (RED) can act as a pre-desalting step before seawater enters the RO unit, thus leading to an important energy saving in RO. In this work, two coupled models are proposed for the RED-RO and ED-RO systems. Each process model was validated. Then a sensitivity analysis was performed to assess the effect of the integration on the overall process cost saving. The analysis was performed by changing ED or RED voltage …
Diffusion Dialysis for Separation of Hydrochloric Acid, Iron and Zinc Ions from Highly Concentrated Pickling Solutions
2020
Acid recovery from pickling waste solutions is an important step to enhance hot-dip-galvanizing industry process sustainability. Diffusion dialysis (DD) can be used to separate acids and heavy metals (e.g., iron and zinc) from pickling waters, promoting the circular use of such raw materials. In the present study, a laboratory scale unit operating in batch and a continuous large scale unit, both equipped with Fumasep anionic exchange membranes, were tested. Results obtained show that zinc and iron concentration affect the HCl recovery in opposite ways. Iron chlorides enhance acid recovery, while zinc chlorides considerably tend to diffuse through the membrane because of negatively charged c…
Towards 1 kW power production in a reverse electrodialysis pilot plant with saline waters and concentrated brines
2017
Abstract Reverse electrodialysis (RED) is a promising technology to extract energy from salinity gradients, especially in the areas where concentrated brine and saline waters are available as feed streams. A first pilot-scale plant was recently built in Trapani (Italy), and tested with real brackish water and brine from saltworks. The present work focuses on the scale-up of the pilot plant, reaching more than 400 m 2 of total membrane area installed and representing the largest operating RED plant so far reported in the literature. With a nominal power capacity of 1 kW, the pilot plant reached almost 700 W of power capacity using artificial brine and brackish water, while a 50% decrease in …
On some issues in the computational modelling of spacer-filled channels for membrane distillation
2017
Abstract This study addresses issues which arise in the computational and experimental modelling of flow and heat/mass transfer in membrane distillation and other processes adopting spacer-filled channels (either planar or spiral wound), but have not been sufficiently clarified in the literature so far. Most of the argumentations presented are based on original computational results obtained by the authors by finite volume simulations; some literature results are also considered. The questions addressed regard the choice of scales for the reduction of data and the definition of dimensionless numbers ( Re , f , Nu , Sh ); the definition of average heat or mass transfer coefficients; the comb…