Search results for "0204 chemical engineering"
showing 10 items of 273 documents
Evaluation of Diethyl Carbonate and Methyl Isobutyl Ketone as Entrainers for the Separation of 1-Hexene and n-Hexane
2017
Diethyl carbonate and methyl isobutyl ketone are tested as possible entrainers for separating 1-hexene and n-hexane by extractive distillation. For this purpose, isobaric vapor–liquid equilibrium (VLE) data at 100 kPa have been obtained for the two ternary systems formed by the two hydrocarbons and one of the selected solvents: 1-hexene + n-hexane + diethyl carbonate and 1-hexene + n-hexane + methyl isobutyl ketone. VLE data for the following constituent binary systems have also been determined: 1-hexene + diethyl carbonate, n-hexane + diethyl carbonate, 1-hexene + methyl isobutyl ketone, and finally n-hexane + methyl isobutyl ketone. All binary systems present moderate positive deviations …
Study of liquid–liquid equilibria at different temperatures of water + ethanol + 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide tern…
2016
Abstract The experimental liquid–liquid equilibria (LLE) data of the water + ethanol + 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([bmp][Tf2N]) system has been measured at different temperatures in this work. The LLE of the system has been measured at between 283 and 333 K. The UNIQUAC and NRTL models were used to correlate the LLE data and good results were obtained in both cases, however UNIQUAC gave a more accurate correlation. In order to apply the UNIQUAC model the volume and surface parameters for [bmp][Tf2N] (r, q) were determined. Finally, in order to obtain ethanol from the aqueous mixture, the solvent capability of the ionic liquid was checked and compared wit…
Separation of the azeotropic mixture 2-propanol + water employing different imidazolium ionic liquids as solvents
2020
Abstract The liquid-liquid equilibria of the ternary systems water (1) + 2-propanol (2) + [emim][Tf2N] (3) and water (1) + 2-propanol (2) + [hmim][Tf2N] (3) at 283.2, 303.2 and 323.2 K and atmospheric pressure were investigated, in order to achieve a better knowledge of the ternary mixture behaviour. The capability of [emim][Tf2N] and [hmim][Tf2N] as solvents in the separation of the azeotropic mixture water + 2-propanol was studied through the distribution coefficient and selectivity, and compared with the results obtained with other ionic liquids in the same azeotropic mixture studied before by our research group. The thermodynamic parameters of both ternary mixtures were calculated by th…
Azeotropic distillation for 1-propanol dehydration with diisopropyl ether as entrainer: Equilibrium data and process simulation
2019
Abstract Azeotropic distillation process is widely used to separate non-ideal binary mixtures into their constituent pure components. 1-Propanol dehydration was used as case study and diisopropyl ether was analysed as possible entrainer in an azeotropic distillation. The separation of some alcohols from their aqueous solution is a challenging task because these aqueous mixture forms minimum boiling azeotrope. In this way, isobaric vapor-liquid and vapour-liquid-liquid equilibrium data were measured for the 1-propanol+ water + diisopropyl ether ternary mixture at 101.3 kPa. The data were correlated by NRTL and UNIQUAC models. A separation sequence (a decanter and a single-feed distillation c…
Capability study of 1-butyl-3- methylimidazolium bis(trifluoromethylsulfonyl)imide and trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phos…
2018
Abstract The liquid-liquid equilibria of the ternary systems water (1) + 1-propanol (2) + 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf2N]) (3) and water (1) + 1-propanol (2) + trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate ([TDTHP][Phosph]) (3) at 283.2, 303.2 and 323.2 K and atmospheric pressure were determined to study their behaviour, determine their thermodynamic parameters and know the capability as solvents of [bmim][Tf2N] and [TDTHP][Phosph] in the separation of the azeotropic mixture water + 1-propanol. The non-random two-liquid (NRTL) and universal quasichemical (UNIQUAC) models were used in the calculation of the thermodynamic par…
Liquid–Liquid Equilibria of the Water + 1-Propanol + 1-Butyl-1-methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide Ternary System: Study of the Abi…
2016
An important problem in the chemical industry is the separation of azeotropes. Their separation by simple distillation is basically impossible, and extractive distillation consumes much more energy than liquid–liquid extraction, so this alternative could be interesting. Recently, researchers have started to explore these option using ionic liquids as the solvent. The remarkable properties of ionic liquids have made them sustainable alternatives to conventional solvents. This work is a continuation of a study developed by our research group on the use of ionic liquids as extractant solvents of alcohol + water mixtures which form azeotropes, using in this case 1-butyl-1-methylpyrrolidinium bi…
Isobaric vapor-liquid equilibria for extractive distillation of 1-propanol + water mixture using thiocyanate-based ionic liquids
2017
Abstract This paper presents vapor-liquid equilibrium (VLE) data at 101.3 kPa for the ternary systems 1-propanol + water + 1-ethyl-3-methylimidazolium thiocyanate [emim][SCN] and 1-propanol + water + 1-butyl-3-methylimidazolium thiocyanate [bmim][SCN] and their constituents binary systems. The experimental data obtained were correlated using the NRTL, eNRTL and UNIQUAC models. It was found that the addition of these ionic liquids enhance the relative volatility of 1-propanol to water, and the separation ability follows the order of [emim][SCN] > [bmim][SCN]. The results obtained were compared with the VLE data of the system containing this azeotropic mixtures with different imidazolium-base…
Simulation of a regeneration plant for spent pickling solutions via spray roasting
2015
Nowadays, pyrohydrolysis techniques are widely applied for regeneration of spent pickling liquors providing an excellent environmental and economical strategy to the problem of waste disposal/recovery, also thanks to the high acid recovery efficiencies (>99%) achieved. In fact, in these processes, iron chlorides are converted into iron oxides and hydrogen chloride at high temperature in spray roasting or fluidized bed reactors. Though the state-of-the-art technologies have been successfully applied only to large-scale plants, the development of small-scale units, able to perform a delocalized regeneration of spent solutions where these latter are actually produced, would be strongly needed …
A Tool for Energy Management and Cost Assessment of Pumps in Waste Water Treatment Plants
2017
Waste Water Treatment Plants (WWTPs) are generally considered energy intensive. Substantial energy saving potentials have been identified by several authors. Pumps consume around 12% of the overall WWTP energy consumption. In this paper we propose a methodology that uses the sensors commonly installed in WWTPs, such as volume and energy sensors, to perform energy benchmarking on pumps. The relationship between energy efficiency and flow rate is used to detect specific problems, and potential solutions are proposed, taking into consideration economical and environmental criteria (cost of externalities in energy production). The methodology integrates energy benchmarking, data-mining, and eco…
Hydroxypropyl Cellulose Films Filled with Halloysite Nanotubes/Wax Hybrid Microspheres
2021
The design of novel nanocomposite films based on hydroxypropyl cellulose (HPC) and wax/halloysite hybrid microspheres has been reported. In particular, we first prepared wax/clay Pickering emulsions which were characterized by thermogravimetric analysis and microscopy. SEM images allowed more detailed insights on the nanotubes disposition at the wax/water interface, acting as an outer stabilizing shell. Therefore, the cellulosic biopolymer was added, and it was found that HPC enhances the colloidal stability of the particles, preventing their coalescence and sedimentation. The preparation of the composite films was carried out by the solvent casting method, which enabled the development of …