Search results for "1105"
showing 10 items of 459 documents
Masonry columns confined with fabric reinforced cementitious matrix (FRCM) systems: A round robin test
2021
Abstract The conservation and the preservation of existing masonry buildings, most of them recognized as cultural heritage, require retrofitting techniques that should reduce the invasiveness and assure reversibility and compatibility with the substrate. In this perspective, the strengthening system should be able to improve the bearing capacity of the structural member and, at the same time, to assure mechanical and material compatibility. The use of Fabric Reinforced Cementitious Matrix (FRCM) composites is now recognized to be suitable for these purposes. Indeed, the inorganic matrix has comparable properties with respect to the existing historical mortars while the fabric has relevant t…
Stainless steel grids for confinement of clay brick masonry columns
2016
This work presents the results of an experimental investigation on the behavior of 21 solid clay brick columns internally strengthened by stainless steel grids placed in the horizontal joints of mortar. This reinforcing technique can be applied as a constructive technique for new construction or as a retrofitting technique for existing structures (old structures to be reconstructed by original constructive method and internal reinforcement). Monotonic compressive loading tests were carried out under concentric and eccentric load. The effects of different numbers of steel grids and eccentricity of the external load were examined. Also, a detailed characterization of the constituent materials…
Computational Study of Failure of Hybrid Steel Trussed Concrete Beams
2017
This study investigates the failure behavior of hybrid steel trussed concrete beams (HSTCBs) under three-point bending through a series of finite-element (FE) simulations. The FE model employs well-established constitutive relations of concrete and steel with a simplified contact condition between the concrete and steel truss. The numerical model is compared with existing experimental data as well as a FE model that uses a more sophisticated concrete-steel interfacial model. The comparison shows that the present model is able to capture various failure mechanisms of the beam and its peak load capacity. The model is applied to investigate the behavior of a set of HSTCBs of different sizes, w…
A strategy for the finite element modeling of FRP-confined concrete columns subjected to preload
2018
Abstract Compressive behavior of columns strengthened by means of an outer elastic confinement provided e.g. by fiber-reinforced polymer (FRP) jackets has become a main topic in the field of structural retrofitting. In details, the problem of the response assessment of strengthened columns is still under study. Many analytical formulations have been proposed to describe the compressive behavior of confined concrete under both monotonic and cyclic loads. However, the effect of a stress/strain level in the columns already present prior to apply the confinement has been generally neglected until now, also because of the lack of well defined strategies of modeling. In this frame, here, (1) a FE…
Analytical stress-strain law of FRP confined masonry in compression: Literature review and design provisions
2017
Abstract The use of Fibre Reinforced Polymer (FRP) wraps has become common in practical applications to retrofit existing columns with poor structural features. Wrapping the member with one or more FRP sheets makes it possible to induce confinement action and enhance strength and ductility. This application has been widely studied and adopted in reinforced concrete members for about twenty years, while its suitability to masonry columns and piers has been investigated during the last decade. The results of several studies were summarized in different design expressions for calculating effective confinement pressure, ultimate compressive stress and strain, and the overall trend of the stress…
Evolution of grain-size distribution of pumice sands in 1-D compression
2016
Abstract Crushing is one of the micromechanisms that govern the mechanical behaviour of sands at medium-high stresses. It depends on mineralogy, form and strength of single particle, mean stress level, coordination number, time, etc.. It causes changes of grain-size distribution, porosity, number and type of grain contacts, fabric, structure of the material, etc.. Results of an experimental research on the crushing of pumice sands compressed under 1-D conditions to vertical effective stresses σ′v up to 100MPa are reported here. They show marked crushing already at σ′v of about 200kPa. The evolution of the grain-size distribution can be represented by ΔDi= h/(K(1+C exp(–hlgσ′v))) in which ΔD…
Asphalt surface mixtures with improved performance using waste polymers via dry and wet processes
2017
"Published online: June 29, 2017"
Time dependent viscoelastic rheological response of pure, modified and synthetic bituminous binders
2016
Bitumen is a viscoelastic material that exhibits both elastic and viscous components of response and displays both a temperature and time dependent relationship between applied stresses and resultant strains. In addition, as bitumen is responsible for the viscoelastic behaviour of all bituminous materials, it plays a dominant role in defining many of the aspects of asphalt road performance, such as strength and stiffness, permanent deformation and cracking. Although conventional bituminous materials perform satisfactorily in most highway pavement applications, there are situations that require the modification of the binder to enhance the properties of existing asphalt material. The best kn…
Influence of orthophosphate ions on the dissolution of tricalcium silicate
2008
International audience; Tricalcium silicate dissolution in the presence of orthophosphate ions was monitored by measuring the concentrations of calcium and silicate ions in dilute suspensions using a special dissolution cell coupled to an optical emission spectrometer. Results show that increasing adsorption of orthophosphate ions slows down the dissolution of Ca3SiO5 and that a calcium-phosphate precipitate may form at certain orthophosphate concentrations. These observations are correlated with results of calorimetric experiments carried out during the hydration of silica-rich cement pastes in the presence of the same salts.
Efficiency of Stress-Strain Models of Confined Concrete With and Without Steel Jacketing to Reproduce Experimental Results
2016
The improvement and the capacity assessment of existing buildings has become the main topic of the last years so that different studies can be found devoted to damaged structures or structures not having a capacity compatible with the safety levels of the actual codes. Reinforced concrete framed structure buildings represent a conspicuous rate of the existing constructions so many efforts are addressed to them. Referring to this type of buildings, a good prediction of strength and deformation capacity requests models able to interpret the constitutive law of concrete confined by internal reinforcement or by eventual external reinforcement applied to increase capacity of cross-sections. Cons…