Search results for "3D Printing"
showing 10 items of 72 documents
AUGMENTED REALITY FOR CULTURAL HERITAGE: THE REBIRTH OF A HISTORICAL SQUARE
2019
Abstract. The case study, faced in this paper, arises in the context of Interreg Italia-Malta European project named I-Access, dedicated to the improvement of accessibility to Cultural Heritage (CH). Accessibility considered not only as the demolition of physical architectural barriers, but also as the possibility of fruition of CH through technological tools that can increase its perception and knowledge. Last achievements in photogrammetry and terrestrial laser scanner (TLS) technology offered new methods of data acquisition in the field of CH, giving the possibility of monitoring and processing big data, in the form of point clouds. Ever in this field, reverse engineering techniques and …
FROM SFM TO 3D PRINT: AUTOMATED WORKFLOW ADDRESSED TO PRACTITIONER AIMED AT THE CONSERVATION AND RESTAURATION
2017
Abstract. In In the last years there has been an increasing use of digital techniques for conservation and restoration purposes. Among these, a very dominant rule is played by the use of digital photogrammetry packages (Agisoft Photoscan, 3D Zephir) which allow to obtain in few steps 3D textured models of real objects. Combined with digital documentation technologies digital fabrication technologies can be employed in a variety of ways to assist in heritage documentation, conservation and dissemination. This paper will give to practitioners an overview on the state of the art available technologies and a feasible workflow for optimizing point cloud and polygon mesh datasets for the purpose …
COMPUTER AIDED RESTORATION TOOLS TO ASSIST THE CONSERVATION OF AN ANCIENT SCULPTURE. THE COLOSSAL STATUE OF ZEUS ENTHRONED
2017
Abstract. The research focuses on the contribution of the integrated application of Computer Aided Restoration digital procedures as a means to guide the integration measure of an artifact, innovating and implementing the traditional investigation methods. The aim of the study was to provide effective geometrical-formal investigation tools in the frame of the conservation work of Zeus enthroned from Soluntum, conserved in the Archaeological Museum “A. Salinas” of Palermo. The paper describes the workflow of the 3D acquisition and graphical modeling with non-invasive digitalization and high information density techniques to assist the conservation of the legs of the throne, especially the in…
3D Printing : Challenging Existing Business Models
2016
Technologies labelled as “disruptive” challenge conventional business procedures. The development of 3D printing technology and additive manufacturing (AM) is expected to transform product design and manufacturing. 3D printing technology makes it possible to produce complex and unique physical products from digitally designed CAD models. It is estimated that the effects of 3D printing on business will be diverse and far‐reaching. Hence, it is vital for business owners to observe how 3D printing may impact on business models and business networks, considering also the effects on stakeholders’ value propositions and on value creation. This paper reports on the potential impact of 3D printing …
Preconcentration and speciation analysis of mercury : 3D printed metal scavenger-based solid-phase extraction followed by analysis with inductively c…
2021
A selective method for preconcentration and determination of methylmercury (MeHg) and inorganic mercury (iHg) in natural water samples at the ng L−1 level has been developed. The method involves adsorption of Hg species into a 3D printed metal scavenger and sequential elution with acidic thiourea solutions before ICP-MS determination. Experimental parameters affecting the preconcentration of MeHg and iHg such as the sample matrix, effect of the flow rate on adsorption, eluent composition, and elution mode have been studied in detail. The obtained method detection limits, considering the preconcentration factors of 42 and 93, were found to be 0.05 ng L−1 and 0.08 ng L−1 for MeHg and iHg, res…
Genioplasty with surgical guide using 3D-printing technology: A systematic review.
2019
The purpose of this systematic review is to evaluate the current state of the art of making genioplasties using 3D printing technology.
Beneficial Effect of Foot Plantar Stimulation in Gait Parameters in Individuals with Parkinson’s Disease
2020
New treatments based on peripheral stimulation of the sensory-motor system have shown to be promising in rehabilitation strategies for patients with neurological disorders, including Parkinson's disease (PD), especially in regards to reducing gait impairment, and hence, the incidence of falls. The aim of this study was to evaluate the change in several gait parameters measured by sensor inertial measurement in PD patients after acute plantar stimulation, under the distal phalanx of the big toe, and underneath the head of the first metatarsal joint of both feet, using a 3D printing insole. In order to assess whether the effects are selective for PD patients, we compared the effect of the tre…
3D Printing Neuron Equivalent Circuits: An Undergraduate Laboratory Exercise.
2018
The electrical equivalent circuit for a neuron is composed of common electrical components in a configuration that replicates the passive electrical properties and behaviors of the neural membrane. It is a powerful tool used to derive such fundamental neurophysiological equations as the Hodgkin-Huxley equations, and it is also the basis for well-known exercises that help students to model the passive (Ohmic) properties of the neuronal membrane. Unfortunately, as these exercises require basic knowledge of electronics, they are generally not physically conducted in biomedical courses, but remain merely conceptual exercises in a book or simulations on a computer. In such manifestations, they l…
Feedback and Communication in Active Hydrogel Spheres with pH Fronts: Facile Approaches to Grow Soft Hydrogel Structures
2021
Abstract Compartmentalized reaction networks regulating signal processing, communication and pattern formation are central to living systems. Towards achieving life‐like materials, we compartmentalized urea‐urease and more complex urea‐urease/ester‐esterase pH‐feedback reaction networks into hydrogel spheres and investigate how fuel‐driven pH fronts can be sent out from these spheres and regulated by internal reaction networks. Membrane characteristics are installed by covering urease spheres with responsive hydrogel shells. We then encapsulate the two networks (urea‐urease and ester‐esterase) separately into different hydrogel spheres to devise communication, pattern formation and attracti…
Selective Laser Sintering of Metal-Organic Frameworks: Production of Highly Porous Filters by 3D Printing onto a Polymeric Matrix.
2019
Metal‐organic frameworks (MOFs) have raised a lot of interest, especially as adsorbing materials, because of their unique and well‐defined pore structures. One of the main challenges in the utilization of MOFs is their crystalline and powdery nature, which makes their use inconvenient in practice. Three‐dimensional printing has been suggested as a potential solution to overcome this problem. We used selective laser sintering (SLS) to print highly porous flow‐through filters containing the MOF copper(II) benzene‐1,3,5‐tricarboxylate (HKUST‐1). These filters were printed simply by mixing HKUST‐1 with an easily printable nylon‐12 polymer matrix. By using the SLS, powdery particles were fused t…