Search results for "ACOUSTIC"

Complete band gap in a pillar-based piezoelectric phononic crystal slab

2016

In this paper we have shown that it is possible to obtain the complete phononic band gaps in a square lattice of pillar-based phononic crystal. Bigger phononic band gap width can be obtained by increasing the height of pillar and it filling fraction, f. It is shown that the gap-to-mid-gap ratio of pillar at h/a = 0.5 has increased by 21.2% when it height increased to 1.25 and the gap-to-mid-gap ratio has increased by 12% when the filling fraction is increased from r/a = 0.3 to 0.45. The study also shows bigger band gap width and higher central frequency can be obtained by increasing the filling fraction of pillar.

Epoxy Resin/Carbon Black Composites Below the Percolation Threshold

2013

International audience; A set of epoxy resin composites filled with 0.25-2.0 wt.% of commercially available ENSACO carbon black (CB) of high and low surface area (CBH and CBL respectively) has been produced. The results of broadband dielectric spectroscopy of manufactured CB/epoxy below the percolation threshold in broad temperature (200 K to 450 K) and frequency (20 Hz to 1 MHz) ranges are reported. The dielectric properties of composites below the percolation threshold are mostly determined by alpha relaxation in pure polymer matrix. The glass transition temperature for CB/epoxy decreases in comparison with neat epoxy resin due to the extra free volume at the polymer-filler interface. At …

Dynamics of human cancer cell lines monitored by electrical and acoustic fluctuation analysis.

2010

Early determination of the metastatic potential of cancer cells is a crucial step for successful oncological treatment. Besides the remarkable progress in molecular genomics- or proteomics-based diagnostics, there is a great demand for in vitro biosensor devices that allow rapid and selective detection of the invasive properties of tumor cells. Here, the classical cancer cell motility in vitro assays for migration and invasion relying on Boyden chambers are compared to a real-time biosensor that analyzes the dynamic properties of adherent cells electro-acoustically with a time resolution on the order of seconds. The sensor relies on the well-established quartz crystal microbalance technique…

Detection and monitoring of carbon monoxide using cobalt corroles film on Love wave devices with delay line configuration

2011

Among specific sensitive materials synthesized for chemical sensor development, cobalt corrole have shown attractive capabilities for CO detection [1, 2]. In this paper, we investigate the possibility to exploit such materials to develop surface acoustic wave (SAW)-based sensors. We actually demonstrate that SAW devices using delay line configuration allow investigating the molecular recognition occurring in non-conductive sensing layers of cobalt corroles. We have monitored phase variations of SAW devices versus various CO concentrations. Moreover, a specific testing setup has been developed to precisely dose CO at low concentrations, to avoid any CO leakage in the environment, to systemat…

Experimental evidence of high spatial confinement of elastic energy in a phononic cantilever

2021

We report on experimental high spatial confinement of elastic energy in a silicon phononic cantilever for which the quality factor of a higher-order flexural resonance is increased by a factor of 27 (from Q ∼ 80 to Q ∼ 2130) with the use of a three-row phononic crystal (PnC) strip. As shown by numerical simulations performed with the finite element method, the PnC both reduces anchor loss and confines elastic energy inside the cantilever. The PnC and the cantilever are fabricated with standard clean room techniques on a silicon on insulator substrate. Optical measurements of the out-of-plane displacements are performed with a laser scanning interferometer in a frequency range around 2 MHz.

Acoustic Emission-Based Condition Monitoring and Remaining Useful Life Prediction of Hydraulic Cylinder Rod Seals

2021

The foremost reason for unscheduled maintenance of hydraulic cylinders in industry is caused by wear of the hydraulic seals. Therefore, condition monitoring and subsequent estimation of remaining useful life (RUL) methods are highly sought after by the maintenance professionals. This study aimed at investigating the use of acoustic emission (AE) sensors to identify the early stages of external leakage initiation in hydraulic cylinders through run to failure studies (RTF) in a test rig. In this study, the impact of sensor location and rod speeds on the AE signal were investigated using both time- and frequency-based features. Furthermore, a frequency domain analysis was conducted to investig…

Design of a 1 kW output power Folded Waveguide TWT operating in ka-band

2019

A Ka-band Serpentine Folded Waveguide Travelling Wave Tube (TWT) has been designed. The imposed design parameters values in terms of high power, high load, wide bandwidth, low weight, along with a structure manufactured with planar technique or by means of a micro milling process, have been obtained. Small signal simulations have been carried out with an in-house software for interaction impedance evaluation. The commercial electromagnetic simulation code CST Suite has been used for dispersion diagram prediction. An optimization of the one-dimensional software, normally used for large-signal simulation in coupled cavity TWTs (“Computer Program for Analysis of Coupled-cavity Travelling-wave-…

2021

Controlling thermal transport at the nanoscale is vital for many applications. Previously, it has been shown that this control can be achieved with periodically nanostructured two-dimensional phononic crystals for the case of suspended devices. Here, we show that thermal conductance can also be controlled with three-dimensional phononic crystals, allowing the engineering of the thermal contact of more varied devices without the need for suspension in the future. We show the experimental results obtained at sub-Kelvin temperatures for two different period three-dimensional crystals and for a bulk control structure. The results show that the conductance can be enhanced with the phononic cryst…

Influence of oxygen ion elementary diffusion jumps on the electron current through the conductive filament in yttria stabilized zirconia nanometer-si…

2021

Abstract The structure of the electron current through an individual filament of a nanometer-sized virtual memristor consisting of a contact of a conductive atomic force microscope probe to an yttria stabilized zirconia (YSZ) thin film deposited on a conductive substrate is investigated. Usually, such investigation is performed by the analysis of the waveform of this current with the aim to extract the random telegraph noise (RTN). Here, we suggest a new indirect method, which is based on the measurement of the spectrum of the low-frequency flicker noise in this current without extracting the RTN, taking into account the geometrical parameters of the filament. We propose that the flicker no…

Solvent-tuned ultrasonic synthesis of 2D coordination polymer nanostructures and flakes

2021

Highlights • Combined ultrasound and solvent assisted synthesis of 2D coordination polymers. • Role of interstitial solvent molecules in the delamination of 2D-CPs. • Influence of the sonication time in delamination and nanostructuration processes. • Morphological and supramolecular transformations in 2D-CPs.