Search results for "ACOUSTIC"

Acoustically driven arrayed waveguide grating.

2015

We demonstrate compact tunable phased-array wavelength-division multiplexers driven by surface acoustic waves (SAWs) in the low GHz range. The devices comprise two couplers, which respectively split and combine the optical signal, linked by an array of single-mode waveguides (WGs). Two different layouts are presented, in which multi-mode interference couplers or free propagating regions were separately employed as couplers. The multiplexers operate on five equally distributed wavelength channels, with a spectral separation of 2 nm. A standing SAW modulates the refractive index of the arrayed WGs. Each wavelength component periodically switches paths between the output channel previously asi…

Actively mode-locked fiber laser with an acousto-optic in-fiber superlattice modulator

2009

All-fiber lasers permit the development of efficient, robust and compact coherent light sources. However, all-fiber active mode-locking is a challenging objective and very few all-fiber techniques have been published [1–3]. The development of a low-insertion-loss acoustically-induced superlattice modulator that works in the MHz range has demonstrated its suitability to perform active mode-locking of an all-fiber laser. While travelling extensional acoustic waves launched along a fiber Bragg grating (FBG) produce stationary side bands and a frequency shift [4,5], we found that the excitation of a standing extensional acoustic wave should produce no frequency shift, but the amplitude modulati…

Focusing of surface-acoustic-wave fields on (100) GaAs surfaces

2003

Focused surface-acoustic waves (SAWs) provide a way to reach intense acoustic fields for electro- and optoacoustic applications on semiconductors. We have investigated the focusing of SAWs by interdigital transducers (IDTs) deposited on (100)-oriented GaAs substrates. The focusing IDTs have curved fingers designed to account for the acoustic anisotropy of the substrate. Different factors that affect focusing, such as the aperture angle and the configuration of the IDT fingers, were systematically addressed. We show that the focusing performance can be considerably improved by appropriate choice of the IDT metal pads, which, under appropriate conditions, create an acoustic waveguide within t…

Compact acousto-optic multimode interference device in (Al,Ga)As.

2020

Multimode interference (MMI) devices are key components in modern integrated photonic circuits. Here, we present acoustically tuned optical switches on an (Al,Ga)As platform that enable robust, compact and fast response systems improving on recently demonstrated technology. The device consists of a 2 × 2 MMI device fine-tuned in its center region by a focused surface acoustic wave (SAW) beam working in the low GHz range. In this way, we can tune the refractive index profile over a narrow modulation region and thus control the optical switching behaviour via the applied SAW intensity. Direct tuning of the MMI device avoids losses and phase errors inherent to arrayed waveguide based switches,…

Ultrasonic phased array inspection of wire plus arc additive manufacture samples using conventional and total focusing method imaging approaches

2019

In this study, three aluminium samples produced by wire + arc additive manufacture (WAAM) are inspected using ultrasonic phased array technology. Artificial defects are machined using a centre drill, ø 3 mm, and electrical discharge machining (EDM), ø 0.5-1 mm, in a cylindrical through-hole topology. The samples are first inspected using a single-element wheel probe mounted on a KUKA robot in order to investigate the feasibility of using a conventional ultrasonic transducer approach. Unfortunately, the wheel probe is found to be unsuitable for scanning the WAAM specimens and ultrasonic phased arrays are employed next. The set-up includes 5 MHz and 10 MHz arrays (128 elements) in direct cont…

Investigation on fracture of epoxy-filled composites by acoustic emission

2016

Acoustic emission (AE) technique is widely used to monitor failure processes in composite materials includ-ing development of cracks and plastic deformations within the polymer matrix, fracture and debonding of inclusions, etc. In this study, the AE technique was applied investigating failure character of epoxy polymers with different content of nanofiller – fine polyethersulfone (PES) powder. Variation of material properties of the epoxy with 0, 5%, 7.5%, 10%, and 12.5% concentration (by weight) of the PES was assessed experimentally. Correlation between the PES content and the modulus of elasticity was found negligible. The same was characteristic for the tensile strength. Whereas, such a…

Evaluation of Nanoparticles as Contrast Agent for Photoacoustic Imaging in Living Cells

2010

Time‐Domain Integration of Broadband Terahertz Pulses in a Tapered Two‐Wire Waveguide

2021

In this work, the time-domain integration of broadband terahertz (THz) pulses via a tapered two-wire waveguide (TTWWG) is reported. Such a guiding structure consists of two metallic wires separated by a variable air gap that shrinks down to a subwavelength size as the movement takes from the waveguide input to its output. It is shown that while an input THz pulse propagates toward the subwavelength output gap, it is reshaped into its first-order time integral waveform. In order to prove the TTWWG time integration functionality, the THz pulse is detected directly within the output gap of the waveguide, so as to prevent the outcoupling diffraction from altering the shape of the time-integrate…

On the Accuracy and Efficiency of Transient Spectral Element Models for Seismic Wave Problems

2016

This study concentrates on transient multiphysical wave problems for simulating seismic waves. The presented models cover the coupling between elastic wave equations in solid structures and acoustic wave equations in fluids. We focus especially on the accuracy and efficiency of the numerical solution based on higher-order discretizations. The spatial discretization is performed by the spectral element method. For time discretization we compare three different schemes. The efficiency of the higher-order time discretization schemes depends on several factors which we discuss by presenting numerical experiments with the fourth-order Runge-Kutta and the fourth-order Adams-Bashforth time-steppin…

A numerical method for imaging of biological microstructures by VHF waves

2014

Imaging techniques give a fundamental support to medical diagnostics during the pathology discovery as well as for the characterization of bio-medical structures. The imaging methods involve electromagnetic waves in a frequency range that spans from some Hz to GHz and over. Most of these methods involve ionizing waves and scanning of a large human body area even if only a focused inspection is needed. In this paper, a numerical method to evaluate the shape of microstructures for application in the medical field, with a very low invasiveness for the human body, is proposed. In particular, the tooth’s root canal is considered. In fact, this is one of the hot topics in the endodontic procedure…