Search results for "AMOR"

The interdependence of structural and electrical properties in TiO2/TiO/Ti periodic multilayers

2013

International audience; Multilayered structures with 14-50 nm periods composed of titanium and two different titanium oxides, TiO and TiO2, were accurately produced by DC magnetron sputtering using the reactive gas pulsing process. The structure and composition of these periodic TiO2/TiO/Ti stacks were investigated by X-ray diffraction and transmission electronic microscopy techniques. Two crystalline phases, hexagonal close packed Ti and face centred cubic TiO, were identified in the metallic-rich sub-layers, whereas the oxygen-rich ones comprised a mixture of amorphous TiO2 and rutile phase. DC electrical resistivity rho measured for temperatures ranging from 300 to 500 K exhibited a meta…

3D magnetic and thermal fields for in the transformer with homogenised amorphous C-core under high frequency

2017

Evaluation and Comparison of Novel Precursors for Atomic Layer Deposition of Nb2O5 Thin Films

2012

Atomic layer deposition (ALD) of Nb2O5 thin films was studied using three novel precursors, namely, tBuN═Nb(NEt2)3, tBuN═Nb(NMeEt)3, and tamylN═Nb(OtBu)3. These precursors are liquid at room temperature, present good volatility, and are reactive toward both water and ozone as the oxygen sources. The deposition temperature was varied from 150 to 375 °C. ALD-type saturative growth modes were confirmed at 275 °C for tBuN═Nb(NEt2)3 and tBuN═Nb(NMeEt)3 together with both oxygen sources. Constant growth rate was observed between a temperature regions of 150 and 325 °C. By contrast, amylN═Nb(OtBu)3 exhibited limited thermal stability and thus a saturative growth mode was not achieved. All films we…

Impact of the molecular structure of an indandione fragment containing azobenzene derivatives on the morphology and electrical properties of thin fil…

2016

Abstract The solution casting method is low-cost processing method. Moreover, it is possible to prepare amorphous thin films by using this method, and thus, both optical quality and electrical properties could be improved in compare to polycrystalline films made by thermal evaporation in vacuum. Therefore, low-molecular-weight compounds that form amorphous structure from solution could be promising in organic electronics. In this work film morphology, molecule energy levels, and charge carrier mobility in thin films of indandione fragment containing azobenzene derivatives were studied. Deep charge carrier trapping states that drastically influenced charge carrier mobility were observed for …

Mixed-Mode Operation of Hybrid Phase-Change Nanophotonic Circuits

2016

Phase change materials (PCMs) are highly attractive for nonvolatile electrical and all-optical memory applications because of unique features such as ultrafast and reversible phase transitions, long-term endurance, and high scalability to nanoscale dimensions. Understanding their transient characteristics upon phase transition in both the electrical and the optical domains is essential for using PCMs in future multifunctional optoelectronic circuits. Here, we use a PCM nanowire embedded into a nanophotonic circuit to study switching dynamics in mixed-mode operation. Evanescent coupling between light traveling along waveguides and a phase-change nanowire enables reversible phase transition b…

Spark Plasma Sintering of Metallic Glasses

2019

Spark plasma sintering (SPS) of metallic glasses (MG) can be quite different from sintering crystalline metallic alloys. Indeed, MG behave differently with increasing temperature, as they encounter a glass transition and devitrification. Their shaping can thus be compared to what can be performed on thermoplastic polymers. SPS is a promising way to prepare bulk parts from amorphous powders, since it allows very fast heating and cooling rates. It gives an advantage to avoid or limit devitrification of the amorphous phase upon the thermal cycle. However, diffusion mechanisms, which generally control densification, are activated at temperatures that are not compatible with MG structural integr…

Hierarchical Beta zeolites obtained in concentrated reaction mixtures as catalysts in tetrahydropyranylation of alcohols

2020

Abstract Hierarchical zeolites consisting of Beta nanoparticles (15–40 nm) were obtained via hydrothermal treatment of a concentrated zeolite gel-precursor (H2O/Si = 2.5–14) without utilization of complex SDAs. The proposed approach is based on the formation of a large number of zeolite nuclei under particular crystallization conditions, followed by their agglomeration resulting in the dense packing of the particles preventing their further growth. The micelles of cetyltrimethylammonium bromide (CTAB) can be used to additionally limit the growth of zeolite nanoparticles during hydrothermal treatment of concentrated reaction mixtures. Such deceleration of crystallization promotes the formati…

Non‐subduction origin for 3.2 Ga high‐pressure metamorphic rocks in the Barberton granitoid‐greenstone terrane, South Africa

2019

The occurrence of high-pressure (HP) garnet-bearing metamorphic rocks in the southern Barberton granitoid-greenstone terrane (BGGT), South Africa, has been proposed as a key indicator of the onset of modern plate tectonics at ca. 3.2 Ga. Here, we report new zircon/titanite U-Pb ages of garnet-bearing HP metamorphic rocks and associated granitoids in the BGGT that argue against such an interpretation. The results show that HP metamorphism occurred synchronously with granitoid magmatism in the Stolzburg domain, the supposed subducted plate, during two episodes at 3.4 and 3.2 Ga, and that these two episodes of magmatism occurred on both sides of the assumed suture zone, a feature that cannot e…

Subduction or sagduction? Ambiguity in constraining the origin of ultramafic–mafic bodies in the Archean crust of NW Scotland

2016

Abstract The Lewisian Complex of NW Scotland is a fragment of the North Atlantic Craton. It comprises mostly Archean tonalite–trondhjemite–granodiorite (TTG) orthogneisses that were variably metamorphosed and reworked in the late Neoarchean to Paleoproterozoic. Within the granulite facies central region of the mainland Lewisian Complex, discontinuous belts composed of ultramafic–mafic rocks and structurally overlying garnet–biotite gneiss (brown gneiss) are spatially associated with steeply-inclined amphibolite facies shear zones that have been interpreted as terrane boundaries. Interpretation of the primary chemical composition of these rocks is complicated by partial melting and melt loss…

Early Neoproterozoic crustal growth and microcontinent formation of the north–central Central Asian Orogenic Belt: New geological, geochronological, …

2021

Abstract In this study, new geological, geochronological, geochemical, and Nd–Hf isotopic data are presented for the Melange Zone within the Zavkhan terrane, Mongolia, and the terrane structure, early Neoproterozoic continental crust growth, and microcontinent formation in the north–central part of the Central Asian Orogenic Belt (CAOB) are discussed. The Melange Zone separates high-grade complexes of the northwestern part of the Zavkhan terrane and unmetamorphosed Neoproterozoic Zavkhan Formation covered by Cryogenian–Cambrian shelf deposits of the southwestern part. Zone consist of a lower-grade association of basalts, basaltic andesites, rarely felsic volcanic rocks, trondhjemites of the…