Search results for "Access network"
showing 10 items of 32 documents
UMTS radio networks
2006
Publisher Summary This chapter reviews the contributions to the UMTS radio network planning, with the optimization being provided from COST 273 and the real-time tuning, which is related to RRM. The results on UTRAN performance evaluation by the means of simulation tools are also discussed. The UMTS planning includes processes like: the propagation and traffic models, the aspects of parameter planning, and the automatic planning algorithms. An accurate ray-tracing model integrated in a UMTS-capable planning tool allows the radio network planner to reach optimal numbers for the BS deployment and configuration while meeting the service level requirements. Ray tracing can identify the problem …
Ultra-Wideband Radio Signals Distribution in FTTH Networks
2008
[EN] The use of an ultra-wideband (UWB) radio technique is proposed as a viable solution for the distribution of high-definition audio/video content in fiber-to-the-home (FTTH) networks. The approach suitability is demonstrated by the transmission of standards-based UWB signals at 1.25 Gb/s along different FTTH fiber links with 25 km up to 60 kin of standard single-mode fiber length in a laboratory experiment. Experimental results suggest that orthogonal frequency-division-multiplexed UWB signals exhibit better transmission performance in FFTH networks than impulse radio UWB signals.
Combined Analysis of OFDM-UWB Transmission in Hybrid Wireless-Optical Access Networks
2009
[EN] The hybrid wireless-optical transmission of ultra-wideband signals employing orthogonal frequency-division multiplexing modulation (OFDM) ultra-wideband (UWB) as defined in the ECMA-368 standard is experimentally analyzed in this letter. The OFDM-UWB signals provide 400 Mb/s per user at optical distances from 5 to 50 km on standard single-mode fiber (SSMF). The analysis includes the wireless radiation from 0 to 3 m after optical transmission. The results indicate a maximum error-vector-magnitude degradation of 2.5 dB measured at 1.5-m radio after 50-km SSMF optical transmission for the first two UWB channels. This degradation translates to 1-m maximum wireless-reach penalty.
Analyses of Dual Polarization WDM and SCM Radio over Fiber and Radio over FSO for C-RAN Architecture
2016
En este trabajo se simulan y verifican experimentalmente los esquemas de transmisión para una Arquitectura de Red de Acceso Radio Centralizada (C-RAN) basados en la combinación de dos tecnologías: Radio sobre Fibra (RoF) y Radio sobre FSO (RoFSO). Las configuraciones propuestas se optimizan para la evolución a largo plazo (LTE) con un ancho de banda de 20 MHz utilizando una modulación de amplitud en cuadratura de 64-QAM en términos de magnitud de vector de error (EVM). En primer lugar, se comparan las mediciones de la multiplexación por división de polarización mediante la combinación de RoF y RoFSO (PDM-RoF/FSO) con los modelos de simulación. Esto se amplía con la combinación de PDM-Multip…
CVS: Using VLANs to Counteract the Effect of Topology Changes in Quasi-Static Mesh Access Networks
2006
Mesh networks are candidate to play the role of switched Ethernet LANs over extended areas and with a sensibly higher flexibility. Actually, mesh networks can exploit both Ethernet and wireless technologies, e.g. Wi-Fi and/or free-space optical links, to provide a high degree of redundancy in an access network, and to provide users with powerful means to connect with each other. By using such technologies, the mesh topology remains stable for hours, so that the mesh topology can be considered quasi-static. However, large meshes require a heavy overhead in the network control plane as for the management of end-to-end paths, which can change due to mobility of users and due to occasional fail…
CADWAN – A Control Architecture for Dense Wi-Fi Access Networks
2018
The growing demands of ubiquitous computing are leading towards the densification of wireless access networks. The challenges of high density deployments can be addressed by network- wide centralized control. To this end we propose CADWAN – a Control Architecture for efficient management of Dense Wi-Fi Access Networks. Its main advantages are: flexibility (it supports software- defined wireless networking), scalability (it uses a three-tier optimization framework), and extendibility (it exploits a unified control interface with support for heterogeneous devices). Furthermore, CADWAN is complementary to ongoing developments in IEEE 802.11, especially 802.11ax.
Scheduling solution for the IEEE 802.16 base station
2008
The IEEE 802.16 standard defines a wireless broadband access network technology called WiMAX. It introduces several advantages, one of which is the support for QoS at the MAC level. To ensure meeting the QoS requirements, the 802.16 base station must run some algorithm to allocate slots between connections. This algorithm is not defined in the 802.16 specification but rather is open for alternative implementations. We propose a simple, yet efficient, solution that is capable of allocating slots based on the QoS requirements, bandwidth request sizes, and the 802.16 network parameters. To test the proposed solution, we have implemented the 802.16 MAC and PHY layers in the NS-2 simulator. Seve…
Handover performance in the IEEE 802.16 mobile networks
2012
The IEEE 802.16 standard provides a full mobility support for stations moving across cell borders. In addition, the WiMAX Forum Network Working Group defines a set of procedures to support handovers in the mobile access network. One of the main characteristics of mobility support is fully controlled and optimized handover (HO), in which a mobile station (MS) migrates from the air interface of one base station (BS) to another one. It is vital to keep the BS transition phase as short as possible to decrease delays and data loss, which is especially crucial for real-time applications, such as VoIP. In this paper we analyze ASN-anchored mobility performance and provide advisable handover relate…
On-body and off-body transmit power control in IEEE 802.15.6 scheduled access networks
2014
Wireless Body Area Networks (WBANs) have received much attention due to the possibility to be used in healthcare applications. For these applications, energy saving is a critical issue, as in many cases, batteries cannot be easily replaced. A transmit power control scheme, able to adapt to the variations of the wireless body channel, will allow consistent energy saving and longer battery life. In this paper we propose a transmit power control scheme suitable for IEEE 802.15.6 narrowband scheduled access networks, in which the transmission power is modulated frame by frame according to a run-time estimation of the channel propagation conditions. A simple and effective line search algorithm i…
Modelling Mobile Encounter Networks
2006
This article presents mobile encounter networks, which emerge when mobile devices come across each other and form a temporary connection between them using a common short-range radio technology. Local information exchanges between mobile devices results in a broadcast diffusion of information to other users of the network with a delay. In addition to presenting the concept of mobile encounter networks, we also provide an abstract method for describing the information diffusion process inside them. peerReviewed