Search results for "Activated Sludge"
showing 10 items of 143 documents
Potential of interactive multiobjective optimization in supporting the design of a groundwater biodenitrification process
2019
The design of water treatment plants requires simultaneous analysis of technical, economic and environmental aspects, identified by multiple conflicting objectives. We demonstrated the advantages of an interactive multiobjective optimization (MOO) method over a posteriori methods in an unexplored field, namely the design of a biological treatment plant for drinking water production, that tackles the process drawbacks, contrarily to what happens in a traditional volumetric-load-driven design procedure. Specifically, we consider a groundwater denitrification biofilter, simulated by the Activated Sludge Model modified with two-stage denitrification kinetics. Three objectives were defined (nitr…
Modelling anaerobic biomass growth kinetics with a substrate threshold concentration.
2004
Abstract Many bacteria have been observed to stop growing below a certain substrate threshold concentration. In this study, a modification of the Monod kinetics expression has been proposed to take into account this substrate threshold concentration observed in bacterial growth. Besides the threshold concentration no additional parameters have been added to the kinetic expression and so, only the substrate threshold concentration and the half-saturation constant have to be estimated for model calibration purposes. Furthermore, for parameter estimation purposes, practical identifiability of this new function has been studied and the results have been satisfactory. The new model has been appl…
Energy intensity modeling for wastewater treatment technologies.
2018
Wastewater treatment plants (WWTPs) are energy intensive facilities; therefore increased pressure has been placed on managers and policy makers to reduce the facilities' energy use. Several studies were conducted to compare the energy intensity (EI) of WWTPs, which showed large dispersion in EI among the facilities. In the present study, the degree EI influenced WWTPs was tested using a set of technical variables by modeling the EI of a 305 WWTP sample grouped into five secondary treatment technologies. Results indicated the following two major findings: i) WWTPs using conventional activated sludge, extended aeration, trickling biofilters, and biodisks exhibited significant economies of sca…
DEGRADATION OF MATER-BI /WOOD FLOUR BIOCOMPOSITES IN ACTIVE SEWAGE SLUDGE
2009
The mechanical properties of Mater-Bi® are, in general, not adequate for certain applications and the addition of a filler is therefore necessary. Among the different fillers, natural fibres are particularly interesting because they potentially allow improving the performance of the material without compromising its biodegradability. In order to improve the basic mechanical properties of a Mater-Bi grade and to obtain a new, fully biodegradable material, wood flour based composites were prepared by different processing methods. To simulate actual and not laboratory bacterial attack on the prepared materials, in this work we studied the biodegradation of the composites in a real active sewag…
Modelling biological and chemically induced precipitation of calcium phosphate in enhanced biological phosphorus removal systems
2011
The biologically induced precipitation processes can be important in wastewater treatment, in particular treating raw wastewater with high calcium concentration combined with Enhanced Biological Phosphorus Removal. Currently, there is little information and experience in modelling jointly biological and chemical processes. This paper presents a calcium phosphate precipitation model and its inclusion in the Activated Sludge Model No 2d (ASM2d). The proposed precipitation model considers that aqueous phase reactions quickly achieve the chemical equilibrium and that aqueous-solid change is kinetically governed. The model was calibrated using data from four experiments in a Sequencing Batch Rea…
A practical protocol for calibration of nutrient removal wastewater treatment models
2011
Activated sludge models can be very useful for designing and managing wastewater treatment plants (WWTPs). However, as with every model, they need to be calibrated for correct and reliable application. Activated sludge model calibration is still a crucial point that needs appropriate guidance. Indeed, although calibration protocols have been developed, the model calibration still represents the main bottleneck to modelling. This paper presents a procedure for the calibration of an activated sludge model based on a comprehensive sensitivity analysis and a novel step-wise Monte Carlo-based calibration of the subset of influential parameters. In the proposed procedure the complex calibration i…
Comparison between kinetics of autochthonous marine bacteria in activated sludge and granular sludge systems at different salinity and SRTs.
2019
Biological nutrient removal performances and kinetics of autochthonous marine biomass in forms of activated sludge and aerobic granular sludge were investigated under different salinity and sludge retention time (SRT). Both the biomasses, cultivated from a fish-canning wastewater, were subjected to stepwise increases in salinity (+2 gNaCl L−1), from 30 gNaCl L−1 up to 50 gNaCl L−1 with the aim to evaluate the maximum potential in withstanding salinity by the autochthonous marine biomass. Microbial marine species belonging to the genus of Cryomorphaceae and of Rhodobacteraceae were found dominant in both the systems at the maximum salinity tested (50 gNaCl L−1). The organic carbon was remove…
Expert control of DO in the aerobic reactor of an activated sludge process
2000
Abstract An expert control structure is proposed for the control of dissolved oxygen (DO) in a Nitrification Denitrification Biological Excess Phosphorus Removal (NDBEPR) plant to account for the several processes that are influenced by the DO concentration in the aerator. In the scheme a supervisory fuzzy controller determines the set point of an inner DO control loop where an Adaptive Robust Generic Model Control (ARGMC) controller is used. The fuzzy supervisory control has a hierarchical structure. Off-line measurements of biological parameters of influent and effluent streams can be used to periodically update the set points of the fuzzy controllers. The complete control scheme has been…
Biokinetic Behaviour of Autochthonous Halophilic Biomass at Different Salinity: Comparison Between Activated Sludge and Granular Sludge Systems
2017
The main goal of this study was the evaluation of the impact of increasing salinity on halophilic biomass in forms of flocculent and granular sludge for the treatment of hypersaline fish-canning wastewater, focusing on the metabolic behavior of autotrophic biomass. For this purpose, two sequencing batch reactors, one with aerobic granular sludge (GSBR) and the other with flocculent activated sludge (SBR) were monitored. In both reactors, a halophilic biomass was cultivated from a real saline wastewater collected from a fish-canning industry. The salt concentration was stepwise increased (2 gNaCl L-1) from 30 gNaCl L-1 to 50 gNaCl L-1. Therefore, ammonia and nitrite uptake rates for granular…
Greenhouse Gas Emissions from Membrane Bioreactors
2017
Nowadays, it is widely accepted that wastewater treatment plants (WWTPs) are significant sources of greenhouse gas (GHG) emission, contributing to the anthropogenic sources. Among the GHG emitted from WWTPs, nitrous oxide (N2O) has been identified of having the major interest/concern, since its high global warming potential (GWP), is 298 times higher than that of CO2 and also to its capability to react with stratospheric ozone causing the layer depletion. Up to now, most of the experimental investigations have been carried out on conventional activated sludge (CAS) processes. The knowledge of N2O emission from advanced technologies such membrane bioreactors (MBRs) is still very limited. The…