Search results for "Activated Sludge"
showing 10 items of 143 documents
The role of EPS in fouling and foaming phenomena for a membrane bioreactor
2013
In contraposition to conventional activated sludge processes, the foaming phenomenon in membrane bioreactor (MBR) is still in its infancy. On the other hand, although several studies have been carried out for better understanding the fouling phenomenon in MBR there are still some gaps in the up-to-date knowledge. The extracellular polymeric substances (EPSs) may have a primary role in fouling and foaming phenomena which in turn can be crucial for MBRs. The aim of this study is to detect a possible relationship that EPSs may have with fouling and foaming in an MBR for wastewater treatment. Foaming phenomenon is monitored by performing specific foam-tests: Foam Power, Scum Index, Foam Rating …
Design and performance of BNR activated sludge systems with flat sheet membranes for solid-liquid separation
2007
The use of immersed membranes for solid-liquid separation in biological nutrient removal activated sludge (BNRAS) systems was investigated at lab scale. Two laboratory-scale BNR activated sludge systems were run in parallel, one a MBR system and the other a conventional system with secondary settling tanks. Both systems were in 3 reactor anaerobic, anoxic, aerobic UCT configurations. The systems were set up to have, as far as possible, identical design parameters such as reactor mass fractions, recycles and sludge age. Differences were the influent flow and total reactor volumes, and the higher reactor concentrations in the MBR system. The performances of the two systems were extensively mo…
Trimeprazine is enantioselectively degraded by an activated sludge in ready biodegradability test conditions
2018
[EN] A great number of available pharmaceuticals are chiral compounds. Although they are usually manufactured as racemic mixtures, they can be enantioselectively biodegraded as a result of microbial processes. In this paper, a biodegradability assay in similar conditions to those recommended in OECD tests of enantiomers of trimeprazine (a phenothiazine employed as a racemate) is carried out. Experiments were performed in batch mode using a minimal salts medium inoculated with an activated sludge (collected from a Valencian Waste Water Treatment Plant, WWTP) and supplemented with the racemate. The concentration of the enantiomers of trimeprazine were monitored by means of a chiral HPLC metho…
Pilot-scale comparison of thermophilic aerobic suspended carrier biofilm process and activated sludge process in pulp and paper mill effluent treatme…
2004
Thermophilic aerobic treatment of settled pulp and paper mill effluent was studied under mill premises with two comparative pilot processes; suspended carrier biofilm process (SCBP) and activated sludge process (ASP). Full-scale mesophilic activated sludge process was a reference treatment. During the runs (61 days) hydraulic retention times (HRTs) were kept 13 ± 5 h and 16 ± 6 h for SCBP and ASP, respectively. Corresponding volumetric loadings rates (VLR) were 2.7 ± 0.9 and 2.2 ± 1.0 kg CODfilt m-3d-1. Temperatures varied between 46 to 60°C in both processes. Mesophilic ASP was operated with HRT of 36 h, corresponding VLR of 0.7 kg CODfilt m-3d-1. Both SCBP and ASP achieved CODfilt (GF/A f…
Hybrid activated sludge/biofilm process for the treatment of municipal wastewater in a cold climate region: a case study.
2011
A hybrid activated sludge/biofilm process was investigated for wastewater treatment in a cold climate region. This process, which contains both suspended biomass and biofilm, usually referred as IFAS process, is created by introducing plastic elements as biofilm carrier media into a conventional activated sludge reactor. In the present study, a hybrid process, composed of an activated sludge and a moving bed biofilm reactor was used. The aim of this paper has been to investigate the performances of a hybrid process, and in particular to gain insight the nitrification process, when operated at relatively low MLSS SRT and low temperatures. The results of a pilot-scale study carried out at the…
Comparative study of laboratory-scale thermophilic and mesophilic activated sludge processes.
2005
Laboratory-scale mesophilic (20-35 degrees C) and thermophilic (55 degrees C) activated sludge processes (ASPs) treating diluted molasses wastewater were compared in effluent quality, removal of different COD fractions, sludge yield, floc size, and sludge settleability. The effect of polyaluminium chloride (PAC) with high cationic charge on sludge settleability and effluent quality was also studied. In the ASPs, the hydraulic retention time was 12h in both processes, corresponding to a volumetric loading rate of 3.2+/-1.0 kg COD(filt) m(-3)d(-1). The mesophilic ASP gave 79+/-18% and 90+/-2% and the thermophilic ASP gave 50+/-6% and 67+/-11% total COD (COD(tot)) and GF/A-filtered COD (COD(fi…
A new plant wide modelling approach for the reduction of greenhouse Gas emission from wastewater treatment plants
2017
Recent studies about greenhouse gas (GHG) emissions show that sewer collection systems and wastewater treatment plants (WWTPs) are anthropogenic GHG potential sources. Therefore, they contribute to the climate change and air pollution. This increasing interest towards climate change has led to the development of new tools for WWTP design and management. This paper presents the first results of a research project aiming at setting-up an innovative mathematical model platform for the design and management of WWTPs. More specifically, the study presents the project’s strategy aimed at setting-up a plant-wide mathematical model which can be used as a tool for reducing/controlling GHG from WWTP.…
Carbon and nutrient biological removal in a University of Cape Town membrane bioreactor: Analysis of a pilot plant operated under two different C/N r…
2016
Abstract The effect of the carbon-to-nitrogen (C/N) ratio variation in a University of Cape Town Membrane bioreactor (UCT-MBR) was investigated. The experimental campaign was divided into two phases, each characterized by a different C/N ratio (namely, 10 and 5, Phase I and Phase II, respectively). The UCT-MBR pilot plant was analysed in terms of carbon and nutrients removal, biomass respiratory activity, activated sludge features and membrane fouling. The results highlighted that the nutrients removal was significantly affected by the decrease of the C/N ratio during the Phase II. The biological carbon removal was also affected by the low C/N value during the Phase II. Indeed, the average …
Evaluation of activated sludge model no.2 at high phosphorus concentrations
2001
This paper presents laboratory scale experimentation carried out to study enhanced biological phosphorus removal at high phosphorus concentrations in a sequencing batch reactor. Four series of data obtained in a sequencing batch reactor are examined in light of the Activated Sludge Model No. 2. This model was calibrated using data from the first and second series working at low phosphorus concentrations. The Activated Sludge Model No. 2 successfully characterised the enhanced biological phosphorus removal performance of the sequencing batch reactor at low phosphorus concentrations. The calibrated model was then used to adjust experimental results of the other series working at high phosphor…
Inoculum of Indigenous Microalgae/Activated Sludge for Optimal Treatment of Municipal Wastewaters and Biochemical Composition of Residual Biomass for…
2022
In this work, municipal wastewater was treated with microalgal/activated sludge consortia. We aimed at obtaining a positive interaction between the microalgae and the heterotrophic bacteria and identifying the best combination for bioremediation purposes. A strain of Chlorella sp CW2 employed in this work was isolated from AS and molecularly characterised in this work for the first time. This strain and another previously isolated strain (Chlorella sp Pozzillo) were inoculated alone and in combination with AS in different ratios in wastewaters. Microalgae/activated sludge growth curves were obtained by using a UV–vis spectrophotometer and a fluorimeter to distinguish the contribution of the…