Search results for "Adhesive"
showing 10 items of 299 documents
On the mechanical behavior of BFRP to aluminum AA6086 mixed joints
2013
The aim of this work is to analyze the possibility to join aluminum alloy AA6086 and composite laminates reinforced with basalt fibers, an innovative material which use is growing in several applications as an alternative to glass fibers. To this goal, three joining techniques were investigated: mechanical by Self Piercing Riveting (in the next called SPR), adhesive by co-curing technique and mixed in which the joining techniques (i.e. adhesive and mechanical) were combined. Two manufacturing technologies (i.e. hand lay-up and vacuum bagging) were used both to produce composite substrates and to realize co-curing adhesion between the substrates to be joined. Mixed joints were realized by in…
Impact of maize mucilage on atrazine mineralization andatzC abundance
2005
Soil was amended with maize mucilage, a major rhizodeposit, to study its role on the number of culturable soil micro-organisms, the structure of the bacterial community, atrazine mineralization and atzC abundance. The maximal percentage of atrazine mineralization was lower for mucilage-amended than for water-amended soil. Total culturable soil bacteria and 16S rDNA copy number, measured by RT-PCR, presented similar values and were not significantly (P < 0.05) different among treatments. Mucilage applied at a rate of 70 mu g C g(-1) dry soil day(-1) over two weeks did not modify the abundance of the total soil microflora. Global structure of soil bacterial communities revealed by RISA analys…
Influence of the adhesive strategy in the sealing ability of resin composite inlays after deep margin elevation
2021
Background The aim of this study was to determine the influence of the gingival margin position and the adhesive strategy selected to perform deep margin elevation (DME) in marginal sealing of resin composite inlays by a nanoleakage test. Material and Methods 12 sound third molars were selected and expulsive MOD cavities for inlays were prepared. Experimental groups were established according to gingival margin location (enamel: 1 mm above cemento-enamel junction (CEJ), dentin: 1 mm below CEJ, or DME, and the adhesive strategy used to lute inlays and elevate the gingival margin. Therefore, the six experimental groups were: 1) Enamel + etch-and-rinse adhesive (ERA) Adper Scotchbond 1XT (SB1X…
An in vitro evaluation of two dentine adhesive systems to seal the pulp chamber using a glucose penetration model
2010
Objectives: To evaluate the sealing capability of Cavit TM G with or without Clearfil TM S3 Bond and Prime & Bond NT placed in the pulp chamber. Study Design: Forty single rooted premolars, extracted for orthodontic and periodontal reasons, with intact coronal surface and mature apices, were standardized to a length of 15 mm. The teeth were instrumented, filled with a gutta-percha master cone and divided into three groups to obturate the pulp chambers: Cavit TM G; Clearfil TM S3 Bond plus Cavit TM G and Prime & Bond® NT plus Cavit TM G. A glucose leakage model was used for evaluating the coronal microleakage. The Mann-Whitney test was used to evaluate the differences in the means of the glu…
In vitro comparison of the retention capacity of new aesthetic brackets.
1999
Tensile bond strength and bond failure location were evaluated in vitro for two types of aesthetic brackets (non-silanated ceramic, polycarbonate) and one stainless steel bracket, using bovine teeth as the substrate and diacrylate resin as the adhesive. The results show that metallic bracket had the highest bond strength (13.21 N) followed by the new plastic bracket (12.01 N), which does not require the use of a primer. The non-silanated ceramic bracket produced the lowest bond strength (8.88 N). Bond failures occurred mainly between bracket and cement, although a small percentage occurred between the enamel-cement interface with the metal and plastic brackets and within the cement for the …
Disinclusion of unerupted teeth by mean of self-ligating brackets: Effect of blood contamination on shear bond strength
2012
Objectives: The aim of this study was to assess the effect of blood contamination on the shear bond strength and failure site of three different orthodontic self-ligating brackets. Study Design: 240 bovine permanent mandibular incisors were randomly divided into 12 groups of 20 specimens each. Orthodontic self-ligating brackets were tested under four different enamel surface conditions: a) dry, b) blood contamination before priming, c) blood contamination after priming, d) blood contamination before and after priming. Brackets were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bond strength values and adhesive failure rate were recorded. Statis…
Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement
1998
The retention forces of a newly developed compomer cement (Dyract Cem), a glass ionomer cement (Ketac Cem Aplicap), and a resin cement (F21) were examined.Cemented cast gold crowns were removed along the path of insertion with a Zwick universal testing device. The impact of both a cured and a noncured additional bonding layer that were applied to the inner surface of the crowns was examined across the Dyract Cem group.The mean adhesive strength was measured at 2.36 +/- 0.69 N/mm2 in the Ketac Cem group, at 0.60 +/- 0.28 N/mm2 in the F21 group, and at 1.85 +/- 0.94 N/mm2 in the Dyract Cem group, respectively. The application of an additional bonding layer to the inner surface of the crowns d…
Antibacterial Properties of Nanoparticles in Dental Restorative Materials. A Systematic Review and Meta-Analysis
2020
Background and Objectives: Nanotechnology has become a significant area of research focused mainly on increasing the antibacterial and mechanical properties of dental materials. The aim of the present systematic review and meta-analysis was to examine and quantitatively analyze the current evidence for the addition of different nanoparticles into dental restorative materials, to determine whether their incorporation increases the antibacterial/antimicrobial properties of the materials. Materials and Methods: A literature search was performed in the Pubmed, Scopus, and Embase databases, up to December 2018, following PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) …
Improved technique for quantitative EDXRF analysis of powdered plant samples
1998
An improved technique for energy-dispersive x-ray fluorescence analysis of powdered plant samples is presented. It is based on the use of a special rotating and moveable sample holder (RMSH). This sample holder provides both controlled rotation and lateral transfer movements of the sample while a measurement is carried out, consequently simulating homogeneous excitation conditions over the sample. In this way it compensates for effects caused by the typical inhomogeneous distribution of intensity within the x-ray beam exciting the elements in the sample. The sample consists of powdered dry plant material deposited in an easy way on an adhesive tape, providing a stable layer of plant particl…
Mechanical Behavior of Steel Fiber-Reinforced Concrete Beams Bonded with External Carbon Fiber Sheets
2017
This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip-off failure of the concrete cover. The CFRP sheets were fixed to the concrete surface by epoxy adhesive as well as combined with various configurations of small-diameter steel pins for mechanical fastening to form a hybrid connection. Such hybrid jointing techniques were found to be particularly adva…