Search results for "Adsorbent"
showing 10 items of 11 documents
Sewage Sludge Derived Materials for CO2 Adsorption
2021
The study tried to contribute to solving two serious environmental issues: CO2 reducing and sewage sludge disposal. Thus, sewage-sludge-derived materials were obtained in order to be evaluated for CO2 adsorption capacity. Therefore, the char resulted after the sewage sludge pyrolysis was subjected to oxidation and chemical activation processes by using different quantities of alkaline hydroxide. One of the obtained materials, activated with a lower quantity of alkaline hydroxide, was also treated with acid chloride. Further, the materials were structural and texturally characterized, and material treated with acid chloride was used for CO2 adsorption tests, due to high surface area and pore…
Ceramic foam supported active materials for boron remediation in water
2015
Due to the narrowrange between boron necessities and toxicity in the environment, there is a high interest in the design of effective boron remediation procedures. We have previously reported a promising boron adsorptionmaterial based on the affinity of boron aqueous species for cis-diol groups that were anchored on differentmesoporous silica matrices.However, the small particle size of these systemsmakes themdifficult to be applied on real remediation situations. In this context we report herein a novel systemfor boron adsorption fromaqueous solutions inwhich the high boron affinity for functionalized mesoporousmaterials is combined with themechanical properties of ceramic foams as macrosc…
Use of Fe and Al containing electrocoagulation sludge as an adsorbent and a catalyst in water treatment
2023
In this study, three different electrocoagulation (EC) sludges were studied as an adsorbent (removal of humic acids) and as a catalyst [catalytic wet peroxide oxidation (CWPO) of bisphenol A (BPA)]. The sludges originated from electrocoagulation process in which aluminum (Al) and iron (Fe) electrodes were used for the treatment of mining industry wastewater. All the materials were used as dried sludge and calcined material. The stability of these materials was studied in neutral and alkaline conditions with analysis of the leached iron content in solution. Based on the EC sludge characterization with X-ray fluorescence (XRF), X-ray diffractometer (XRD), and diffuse-reflectance infrared Four…
Development of iron oxide/activated carbon nanoparticle composite for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution
2018
Iron oxide (Fe3O4) and iron oxide/activated carbon (Fe3O4/AC) were fabricated by co-precipitation method for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution in batch mode. These nanoparticles were characterized by BET, FTIR, XRD, SEM/TEM and VSM. The optimum conditions for the removal of ions were pH = 2 for Cr(VI) and 6 for Cu(II) and Cd(II), initial metal ion concentration = 50 mg L−1, nanoparticle dose = 50 mg/10 mL, temperature = 25 ± 1 °C, shaking speed = 180 rpm and contact time = 3 h. The equilibrium data of ions sorption were well described by Langmuir, Freundlich, Redlich-Peterson and Intraparticle Diffusion model. The R2 values obtained by Langmuir model were h…
Concurrent removal of Cr(III), Cu(II), and Pb(II) ions from water by multifunctional TiO2/Alg/FeNPs beads
2019
Abstract The use of multifunctional materials for water remediation is a modern approach where adsorption phenomena and heterogeneous photocatalysis can be applied for the removal of pollutants. Since the ideal remediation system should be able to remove both organic and inorganic pollutants, a crucial aspect to consider is the knowledge of operational parameters affecting the removal process, especially when heavy metal ions are present in concoction as in real systems. Given the proven efficiency of multifunctional TiO2/Alg/FeNPs magnetic beads for the removal of model organic pollutants, this study investigated the possibility to exploit such system also for the removal of mixed heavy me…
Evaluation of sampling adsorbents and validation of a LC-HRMS method for determination of 28 airborne pesticides
2018
A new strategy for sampling, using a low-volume sampler, and determination of airborne pesticides by liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-HRMS) has been developed. The trapping efficiency of three adsorbents (sandwich PUF-XAD2-PUF; XAD-2 and XAD-4) was tested for 33 currently used pesticides and the first adsorbent (PUF-XAD2-PUF) was selected because it presented the highest retention capacity without breakthrough. Selected PUF-XAD2-PUF had the following design: 5 g of Amberlite XAD-2 sandwiched between two cylinders of PUF (6.87 cm(3), height: 1.4 cm, diameter: 2.5 cm). A validation of the analytical methodology that includes microwave extraction with e…
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
2022
Global climate change ensued by the rise in atmospheric CO2 levels is one of the greatest challenges our planet is facing today. This worldwide distress demands technologies that can contribute to our society toward “negative carbon emissions”. Carbon capture and storage (CCS) technologies are in in important role for capturing CO2 from existing emission sources, such as industrial and energy production point sources, before new more prominent modifications to the energy infrastructure can be implemented. Recently, alongside point source capture, direct air capture (DAC) processes have emerged as highly sought-after technologies that are able to capture CO2 from the ambient air. Alongside t…
Aromātisko sveču un smaržkociņu degšanas rezultātā izdalīto aerosolu daļiņu analīze
2018
Blūma I., zinātniskā vadītāja Dr.ķīm., doc. Osīte A. Maģistra darbs, 66 lappuses, 30 attēli, 24 tabulas, 87 literatūras avoti, 7 pielikumi. Latviešu valodā.Maģistra darbā izskatīta literatūra par aromātisko sveču un smaržkociņu izdalīto aerosolu radīto piesārņojumu iekštelpās un iespējamo kaitējumu cilvēku veselībai. Apskatītas smalko aerosolu daļiņu kvalitatīvas un kvantitatīvas analīzes iespējas, to frakcionēšana un adsorbcija uz cieta adsorbenta. Darbā ievāktas un analizētas aromātisko sveču un smaržkociņu dedzināšanas rezultātā izdalītās aerosolu daļiņas. Noteiktas aerosolu daļiņu un slāpekļa oksīdu masas koncentrācijas paraugu dedzināšanas laikā.
Selection of sampling adsorbents and optimisation and validation of a GC-MS/MS method for airborne pesticides
2017
ABSTRACTA methodology for the sampling and determination of airborne pesticides has been developed. The trapping efficiency of three adsorbents, namely XAD-2,XAD-4 and a sandwich sorbent (PUF-XAD2-PUF), was tested for 34 pesticides and the latter was selected because it presented the highest retention capacity without breakthrough. Pesticides were determined by gas chromatography coupled to an ion trap mass spectrometer in tandem. The method showed recoveries ranging from 70% to 120% with limits of quantification in the range of 16.1–322.6 pg m−3 when 155 m3 were sampled. This analytical strategy was applied to 10 indoor air samples collected in dwellings from the Valencian Region. Six pest…
A comparative study for the removal of methylene blue dye by N and S modified TiO2 adsorbents
2015
Successful removal of methylene blue (MB) dye from aqueous solutions using nitrogen and sulfur modified TiO2(P25) nanoparticles has been demonstrated in this study. The modified adsorbents were characterized using various analytical methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The adsorption potential of S-TiO2, N-TiO2 and TiO2(P25) type adsorbents was tested for the removal of MB dye. The kinetic studies indicated that the adsorption of MB dye followed the pseudo-first order model, while desorption processes followed the second order model. The adsorption capacity of the adsorbent proved to be increasing as a f…