Search results for "Aeration"
showing 10 items of 73 documents
Greenhouse gas emissions from membrane bioreactors: analysis of a two-year survey on different MBR configurations
2018
Abstract This study aimed at evaluating the nitrous oxide (N2O) emissions from membrane bioreactors (MBRs) for wastewater treatment. The study investigated the N2O emissions considering multiple influential factors over a two-year period: (i) different MBR based process configurations; (ii) wastewater composition (municipal or industrial); (iii) operational conditions (i.e. sludge retention time, carbon-to-nitrogen ratio, C/N, hydraulic retention time); (iv) membrane modules. Among the overall analysed configurations, the highest N2O emission occurred from the aerated reactors. The treatment of industrial wastewater, contaminated with salt and hydrocarbons, provided the highest N2O emission…
Low cost-sensors as a real alternative to on-line nitrogen analysers in continuous systems.
2009
This paper is focused on the evaluation of the applicability of low-cost sensors (pH and ORP) versus nutrient analysers for controlling biological nitrogen removal in WWTPs. A nutrient removal pilot plant located in Carraixet WWTP (Valencia, Spain) that is equipped with a significant number of nutrient analysers and low-cost sensors was used. The relations between reliable, cheap on-line sensors such as pH and ORP (located in anaerobic, anoxic and aerobic zones) and the nitrification/denitrification processes are provided. The nitrification process can be evaluated by measuring the pH difference between the first and last aerobic zones. The denitrification process can be evaluated by measur…
Anaerobic on-site black water and kitchen waste treatment using UASB-septic tanks at low temperatures.
2006
Anaerobic on-site treatment of black water (BW) and a mixture of black water and kitchen waste (BWKW) was studied in a two-phased upflow anaerobic sludge blanket septic tank (UASBst) at 10–20 °C. The processes were fed either continuously or discontinuously (twice per weekday). Moreover, BWKW was post-treated for nitrogen removal in an intermittently aerated moving bed biofilm reactor (MBBR) at 20 °C. Removal of total chemical oxygen demand (CODt) was efficient at minimum 90% with all three UASBst at all temperatures. Removal of dissolved COD (CODdis) was also high at approx. 70% with continuously fed BW and discontinuously fed BWKW, while with discontinuous BW feeding it was 20%. Temperatu…
Control of activated sludge settleability using preaeration and preprecipitation
1993
This paper deals with the addition of a preaeration and a preprecipitation stage to a conventional activated sludge process. The experiments were carried out in a pilot plant using wastewater from the city of Valencia (Spain) as feed. The effect of the F/M ratio and sludge age on sludge settleability was established. In both cases, process stability was observed to increase with respect to the conventional process. Good sludge settleability was thus assured in a greater F/M ratio range. A comparative economic study was also carried out.
On the use of a powder rheometer to characterize the powder flowability at low consolidation with torque resistances
2017
The Anton Paar Powder Cell was used to measure the torque necessary to rotate an impeller in beds of glass beads, sand and alumina powders aerated between no aeration to the minimum for fluidization. Measured torque values depend on the material tested, on the air flow rate applied, on the impeller depth and on the height of the impeller blade. The effect of the impeller depth is linear for low impeller depth and is less than linear at high depth values. A model was developed for the interpretation of the experimental results based on the idea that the material is shearing on the surface described by the impeller rotation. The model allows to estimate an effectiveness of the impeller in the…
Aerobic granular sludge treating anaerobically pretreated brewery wastewater at different loading rates.
2020
Abstract In this study, three different aerobic granular sludge (AGS) reactors fed with anaerobically pre-treated brewery wastewater were studied. The AGS reactors were operated under different conditions including organic loading rates (OLR) between 0.8 and 4.1 kg COD m−3 d−1, C:N:P ratios (100:10:1 and 100:6:1) and food to microorganism ratios (F/M) between 0.8 ± 0.6 and 1.2 ± 0.5 and 0.9 ± 0.3 kg-TCOD kg-VSS−1d−1. Stable granulation was achieved within two weeks and the size of the granules increased according to the OLR applied. The results indicated that low C:N:P and F/M ratios were favorable to achieve stable aerobic granules in the long term. The carbon removal rate was load-indepen…
Windrow composting of source separated kitchen biowastes in Finland
2000
All households in the City of Jyväskylä have been required to source-separate their wastes since June 1996. The accumulation of kitchen biowaste was about 60 kg per resident in 1997, with an efficiency of more than 75%. The residents of almost 50% of the detached houses in the city opted for small-scale composting. Ensuing kitchen biowaste was surprisingly pure: the estimated content of non-compostable material was less than 0.1 % by weight. The biowastes were composted at the Mustankorkea waste station in open windrows. Adequate aeration of the windrows was guaranteed when the initial height of the windrow was less than 1.5 m and the blending ratio for biowaste and bulking agent was one t…
Pilot scale experiment with MBR operated in intermittent aeration condition: analysis of biological performance.
2014
The effect of intermittent aeration (IA) on a MBR system was investigated. The study was aimed at ana- lyzing different working conditions and the influence of different IA cycles on the biological performance of the MBR pilot plant, in terms of organic carbon and ammonium removal as well as extracellular poly- meric substances (EPSs) production. The membrane modules were placed in a separate compartment, continuously aerated. This configuration allowed to disconnect from the filtration stage the biological phenomena occurring into the IA bioreactor. The observed results highlighted good efficiencies, in terms of organic carbon and ammonium removal. It was noticed a significant soluble micr…
The role of EPS in the foaming and fouling for a MBR operated in intermittent aeration conditions
2016
Abstract This work investigates the causes of foaming and fouling in an Intermittent Aerated – Membrane BioReactor (IA-MBR) used for wastewater treatment. The experiment was divided into three periods with different aerated regimes expressed with different t aeration /t cycle ratio (Period I: 60 min/180 min, Period II: 80 min/180 min, Period III: 30 min/90 min). The advanced foaming tests used allow the study of the role of extracellular polymeric substances (EPSs) on foaming and fouling. In general, in the Periods I and II, good correlations between the EPSs and the Modified Scum Index without purification (MSI 0 ) and the Foam Power were observed. The results shown that the filamentous mi…
Struvite formation from the supernatants of an anaerobic digestion pilot plant
2009
This work studied the influence of the characteristics of the supernatants on the struvite precipitation process. Eighteen experiments with the supernatants generated in an anaerobic digestion pilot plant were performed in a stirred reactor. In order to obtain the pH control during the crystallization process, a Fuzzy Logic based controller was used. High phosphorus precipitation and recovery efficiencies were obtained. The composition of the supernatants was analyzed in order to study its influence on the solids formed from those solutions. The presence of calcium reduced the percentage of phosphorus precipitated as struvite leading to the formation of amorphous calcium phosphate (ACP), wh…