Search results for "Alum"
showing 10 items of 1303 documents
The anodic and cathodic dissolution of Al and Al–Cu–Mg alloy
2010
Abstract Atomic emission spectroelectrochemistry (AESEC) was used to monitor the release of Al from 99.99% aluminum (1199 alloy) and Al, Mg, and Cu from 2024 Al alloy in 30 g/l NaCl electrolyte as a function of pH. The cathodic dissolution of Al was demonstrated and attributed to an increase in the pH at the interface due to the water reduction reaction. The dissolution of Mg was also observed but was a more complex function of current probably depending on the interfacial pH and the Al dissolution rate. The detachment of copper-rich particles was observed as very rapid spectroscopic emission transients (peak width
Synthesis of micro-mesoporous aluminosilicates on the basis of ZSM-5 zeolite using dual-functional templates at presence of micellar and molecular te…
2017
Abstract Micro-mesoporous aluminosilicates consisting of agglomerates of the ZSM-5 nanoparticles were obtained using dual-functional templates [C6H13–N+(CH3)2–C6H12–N+(CH3)2–C6H13](Br−)2 (C6–6–6Br2), [C8H17–N+(CH3)2–C6H12–N+(CH3)2–C8H17](Br−)2 (C8–6–8Br2). Aluminosilicates with randomly oriented flake-like particles built from ZSM-5 layers were obtained using [C16H33–N+(CH3)2–C6H12–N+(CH3)2–C6H13](Br−)2 (C16–6–6Br2). Use of С8–6–8Br2 and additive of cetyltrimethylammonium bromide CTAB (CTAB concentration is lower than the first critical micelle concentration, CMC1) leads to an increase of the total specific surface area, mesopore surface area and the mesopore size uniformity in the product,…
Ancillary Ligand Effect on Single-Site Styrene Polymerization: Isospecificity of Group 4 Metal Bis(phenolate) Catalysts
2003
Styrene is polymerized isospecifically by group 4 metal complexes that contain a C2-symmetrically coordinated 1,4-dithiabutane-linked bis(phenolato) ligand activated by methylaluminoxane.
Über die Inhibitoren der Korrosion IV(1). Versuche zur Unterdrückung der Auflösung von Aluminium durch organische Substanzen in saurer und alkalische…
1965
Oniumsalze oder potentielle Oniumsalze sind wirksame Inhibitoren der Auflosung von Aluminium in Salzsaure. Ihr Schutz ist im alkalischen Medium geringer. Corrosion Inhibitors IV. Investigations into the suppression of the dissolution of aluminium by organic substances in acid and alkaline solution Onium salts or potential onium salts are effective inhibitors in respect of the dissolution of aluminium in hydrochloric acid. In the alkaline medium, the protective effect is less marked.
Gold catalysts supported on CeO2 and CeO2–Al2O3 for NO reduction by CO
2006
Abstract The reduction of NO x by CO was studied over gold catalyst supported on ceria and ceria–alumina. The mixed supports with different CeO 2 /Al 2 O 3 ratios were prepared by co-precipitation. The catalysts were characterized by means of XRD, TPR, XPS and Raman spectroscopy. The addition of alumina led to a slight enlargement of the gold particles, while the ceria particle size was decreased. Deeper oxygen vacancies formation in the presence of alumina was detected by TPR, XPS and Raman spectroscopy, compared to the pure ceria support. The samples exhibited a high and stable activity and 100% selectivity towards N 2 was reached at 200 °C.
Spectrophotometric determination of fluoride in fluoride-bearing minerals after decomposition by fusion with sodium hydroxide
1984
The decomposition of highly insoluble minerals (fluorspar and cryolite) by fusion with molten alkali-metal hydroxides is studied. The introduction of additives such as aluminium compounds or sodium peroxide to obtain total liberation of fluoride from calcium fluoride samples, is tested. The fusion is done in a silver crucible with a Bunsen burner. The cooled melt is easily soluble, giving solutions suitable for spectrophotometric fluoride determination by the Zr(IV)-fluoride-Erichrome Cyanine R method.
Novel synthesis of spherical MCM-48
1999
Abstract A novel synthesis route was developed for the cubic member of the M41S family, MCM-48, with a three-dimensional pore system allowing the formation of submicrometre- to micrometre-sized beads with a narrow pore-size distribution. The synthesis is based on the modified Stober method applying tetraethoxysilane, ethanol, water, ammonia and n -hexadecyltrimethylammonium bromide as template. The specific surface area, the specific pore volume and the average pore diameter were varied in the following ranges: 900–1600 m 2 g −1 , 0.5–0.9 cm 3 g −1 and 2–3 nm. Aluminium-, chromium-, gallium-, niobium- and vanadium-MCM-48 were also synthesized following this procedure.
Modelling of the cation motions in complex system: case of Na-mordenites
2002
Abstract Semi-empirical inter-atomic potentials and Monte Carlo algorithms are proposed to predict the evolution of the interaction energy between sodium ions and a mordenite type aluminosilicate network as a function of Si/Al ratio. This result is favourably compared with the activation energy barriers for Na + `jumps' responsible for the polarization change, measured by thermally stimulated current (TSC) spectroscopy, for Na-mordenites characterized by Si/Al ratios ranged from 5.5 to 12. Finally, we propose a possible mechanism for the cation motions, which involves activation barriers within the same order of magnitude than those measured by TSC.
Determination of metal inventory and current efficiency in commercial aluminum reduction cells
1971
A method for the determination of the metal inventory in commercial aluminum reduction cells, based on radioisotope dilution, has been developed, employing a198Au tracer. By taking a large number of samples from the cells, the current efficiency is evaluated from the slope of the cumulative metal inventory vs time data. The method allows a determination of the current efficiency over a period of 2 to 3 days with a relative precision of approximately 1 pct. The paper gives a thorough discussion of the sources of error inherent in the procedure suggested.
Effect of the Al/Si atomic ratio on surface and structural properties of sol-gel prepared aluminosilicates
2003
Abstract A series of aluminosilicates with an Al/Si ratio ranging from 0 to ∞ (0 for pure silica and ∞ for pure alumina) was prepared by sol–gel process and characterized by surface and structure techniques. Aluminum tri sec butoxide and tetramethylorthosilicate were used as precursors for the sol–gel synthesis. The acidic properties of the oxides were studied by determination of the zero point charges, through mass titration method, and, for selected samples, by FT-IR spectroscopy of adsorbed pyridine used as a probe for both Bronsted and Lewis acidity. A dependence of the acidity on the Al/Si atomic ratio was found. According to the X-ray diffraction patterns, all the oxides have an amorp…