Search results for "Amplitude"
showing 10 items of 1169 documents
All-fiber lasers actively modelocked by acousto-optic modulation
2010
The development of all-fiber lasers is of high interest because of the intrinsic robustness, compactness and energy efficiency. In-fiber amplitude modulators based on acousto-optic modulation of fiber Bragg gratings (FBG) permit the implementation of novel all-fiber actively modelocked lasers. Using either traveling or standing longitudinal acoustic waves, optical pulses between 500 and 100 mW peak powers and ∼ 700 ps temporal width were obtained at 4.1 and 9 MHz repetition rates, respectively. Implementing a simultaneous active Q-switching, we have demonstrated a doubly active Q-switching and mode-locking of two different all-fiber laser configurations. In the case of the laser based on tr…
Non-contact ultrasonic inspection of skin/core bond in honeycomb with lamb waves
2003
The assessment of skin/core bond in honeycomb samples was carried out by a bistatic ultrasonic non-contact system. Lamb waves were generated by a Nd:YAG pulsed laser and detected by an air-coupled capacitance transducer located in pitch-catch configuration. Periodically spaced line sources, generated on the sample surface using a four element lenticular array, allowed generation of narrow-band directional Lamb waves. Changes in amplitude of the transmitted signal permitted detection of skin/core disbonds.
Long-cavity all-fiber ring laser actively mode locked with an in-fiber bandpass acousto-optic modulator.
2013
We demonstrate low-frequency active mode locking of an erbium-doped all-fiber ring laser. As the mode locker, we used a new in-fiber bandpass acousto-optic modulator showing 74% modulation depth, 3.7 dB power insertion losses, 4.5 nm of optical bandwidth, and 20 dB of nonresonant light suppression. The laser generates 330 ps mode-locked pulses over a 10 ns pedestal, at a 1.538 MHz frequency, with 130 mW of pump power. Fil: Cuadrado Laborde, Christian Ariel. Universidad de Valencia; España. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Centro de Investigaciones Opticas (i); Argentina. Provincia de Buenos Aires. Gobernación. Comisión de In…
Photorefractive and photochromic effects in Sn2P2S6 at various temperatures
2013
Abstract Photochromic effect in nominally pure and doped Sn 2 P 2 S 6 photorefractive crystals is investigated in the temperature range 120–310 K. This effect determines a mechanism of the amplitude hologram formation at low temperatures, and we show that a competition between the photorefractive (phase) and the amplitude gratings occurs at increasing temperature.
Optical tuning of dielectric nanoantennas for thermo-optically reconfigurable nonlinear metasurfaces
2021
We demonstrate optically tunable control of second-harmonic generation in all-dielectric nanoantennas: by using a control beam that is absorbed by the nanoresonator, we thermo-optically change the refractive index of the radiating element to modulate the amplitude of the second-harmonic signal. For a moderate temperature increase of roughly 40 K, modulation of the efficiency up to 60% is demonstrated; this large tunability of the single meta-atom response paves the way to exciting avenues for reconfigurable homogeneous and heterogeneous metasurfaces.
Doubly active Q switching and mode locking of an all-fiber laser
2009
Simultaneous and independent active Q switching and active mode locking of an erbium-doped fiber laser is demonstrated using all-fiber modulation techniques. A magnetostrictive rod attached to the output fiber Bragg grating modulates the Q factor of the Fabry-Perot cavity, whereas active mode locking is achieved by amplitude modulation with a Bragg-grating-based acousto-optic device. Fully modulated Q-switched mode-locked trains of optical pulses were obtained for a wide range of pump powers and repetition rates. For a Q-switched repetition rate of 500 Hz and a pump power of 100 mW, the laser generates trains of 12-14 mode-locked pulses of about 1 ns each, within an envelope of 550 ns, an o…
Damage accumulation under variable amplitude loading of welded medium- and high-strength steels
2004
Abstract The paper presents the calculation of cumulative damage for two types of welded joints (butt weld and transverse stiffeners) of four steels (medium to high strength): S355N, S355M, S690Q and S960Q. This calculation is based on experimental data obtained under axial loading and bending with constant and variable amplitudes (Gaussian distribution and Gauss with overload spectrum). The experiments were performed under fully reversed ( R =−1) and pulsating ( R =0) loading. The fatigue life is calculated using the modifications of the Palmgren–Miner–Original rule, according to the Palmgren–Miner–Elementary method, as well as to Haibach’s suggestion. The fatigue life does not depend on t…
Assessment of multiaxial fatigue behaviour of welded joints under combined bending and torsion by application of a fictitious notch radius
2004
Abstract A major problem in the assessment of the multiaxial fatigue behaviour in welded joints is the determination of local notch stresses, since the real local radii in most cases are not known. This can be circumvented by introducing a fictitious notch radius, according to Neuber and Radaj. The calculations of local equivalent stress amplitudes for welded joints (tube–tube and flange–tube) under pure bending, pure torsion and combined in- and out-of-phase bending with torsion can then be carried out by stress-based and strain energy density-based criteria. Among the investigated methods, the most reliable results are obtained with the effective equivalent stress hypothesis, an integral …
Actively mode-locked fiber laser with an acousto-optic in-fiber superlattice modulator
2009
All-fiber lasers permit the development of efficient, robust and compact coherent light sources. However, all-fiber active mode-locking is a challenging objective and very few all-fiber techniques have been published [1–3]. The development of a low-insertion-loss acoustically-induced superlattice modulator that works in the MHz range has demonstrated its suitability to perform active mode-locking of an all-fiber laser. While travelling extensional acoustic waves launched along a fiber Bragg grating (FBG) produce stationary side bands and a frequency shift [4,5], we found that the excitation of a standing extensional acoustic wave should produce no frequency shift, but the amplitude modulati…
Actively mode-locked fibre ring laser based on in-fibre acousto-optic amplitude modulation
2011
Recent advances in the development of all-fibre amplitude modulators have led to the implementation of a series of different actively mode-locked fibre lasers [1–4]. In-fibre acousto-optic modulation based on intermodal coupling induced my a standing flexural acoustic wave permits the implementation of broad bandwidth (1.5 nm), high modulation depth (0.72), low-insertion-loss (0.75 dB) all-fibre amplitude modulators that operate in the MHz frequency range. The experimental characterization of a laser with the configuration depicted in Fig. 1 (a) as a function of the radio frequency voltage that controls the modulator (see Fig. 1 (b)), the length of the Erbium doped fibre (EDF), and the opti…