Search results for "Analytical model"
showing 10 items of 33 documents
Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling
2014
Abstract The structural behaviour of concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix under an uniaxial load was investigated. Medium size specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression, to investigate the efficiency of a p-Phenylene BenzobisOxazole (PBO) Fibre Reinforced Cementitious Mortar (FRCM) system in increasing both strength and ductility. The experimental results show that the confinement system adopted produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardeni…
Shear resistance analytical evaluation for RC beams with transverse reinforcement with two different inclinations
2020
An analysis-oriented mechanical model for shear strength evaluation of Reinforced Concrete (RC) beams with transverse reinforcement with two different inclinations, which required a numerical analysis, is turned into a design-oriented analytical model that can easily be utilized for practical purposes. The model assessed the shear resistance, according to the “lower-bound solution”, employing a numerical procedure that maximizes the element shear strength varying the stresses in the two sets of transverse reinforcement and the magnitude and inclination of the web concrete compressive stress field. The model is formulated with the aim of representing an extension of Eurocode 2 framework to R…
Stress transfer and failure mechanisms in steel-concrete trussed beams: Experimental investigation on slab-thick and full-thick beams
2018
Abstract This study presents the results of an experimental investigation on semi-precast Hybrid Steel Trussed-Concrete Beams (HSTCBs) for analyzing the failure modes and the stress transfer mechanism between concrete and embedded steel elements (plate and truss). The available literature presents previous studies carried out by the authors mainly focused on the understanding of the local transfer mechanism by means of push-out tests. Conversely, in this paper original the results of laboratory tests conducted on six specimens of full-size HSTCBs subjected to four-point bending, with variation in the shear span, are reported on. From these results, the authors are able to assess the failure…
An Analytical Step-by-Step Procedure to Derive the Flexural Response of RC Sections in Compression
2013
This paper proposes an analysis procedure able to determine the flexural response of rectangular symmetrically reinforced concrete sections subjected to axial load and uniaxial bending. With respect to the usual numerical approaches, based on the fibre decomposition method, this procedure is based on the use of analytical expressions of the contributions to the equilibrium given by the longitudinal reinforcement and the concrete region in compression, which depend on the neutral axis depth and the curvature at each analysis step. The formulation is developed in dimensionless terms, after a preliminary definition of the geometrical and mechanical parameters involved, so that the results are …
TOWARD A DESIGN METHOD FOR METAL-COMPOSITE CO-CURED JOINT BASED ON THE G-SIFs
2013
Abstract In this work, a systematic study of the singular stress field in the zone where the interface intersects the free edge surfaces of bonded metal-composite co-cured joints, has been performed. The obtained theoretical, numerical and experimental results have permitted to detect the relationships between the joint configuration and the singular stress field, as well as to implement a new design method based on the so called generalised stress intensity factors. Such a proposed method allows the user to predict the static strength of a generic metal-composite co-cured joint, vs. the main influence parameters as the elastic modulus of the coupled materials, the overlap length, the taper…
Strength and ductility of confined concrete columns under axial load and biaxial bending
2012
The behaviour of prismatic reinforced concrete columns under increasing eccentric compression load was experimentally investigated and analytically modelled. Columns with distributed longitudinal reinforcement and closely spaced transverse reinforcement were tested up to failure, considering different values and directions of eccentricity. Preliminary tests were carried out under concentric compression in order to validate the choice of the stress-strain laws adopted for the confined concrete and the longitudinal steel bars in compression. In the paper, closed form expressions able to approximate the experimental results in the case of uniaxial bending are presented. Finally, a fibre numeri…
Indagine sperimentale su nodi di tralicci in acciaio di travi reticolari miste
2009
Results of experimental tests on welded joints of steel truss of encased composite steel-concrete beams are presented. The welding of the inclined web bars to top bars, both of steel type B450C, and to bottom steel plate, the latter made of S355 steel type, are tested. Two analytical expressions for prediction of welding strength are derived: the one based on a resistance criterion and the other based on a limit domain of the welding section. Guidelines for choosing the effective dimensions of the fillet weld, necessary to determine the strength, are provided. A high precision digital scanner is used to validate the suggested guidelines to determine the geometrical characteristics of the fi…
ANALISI TEORICO-SPERIMENTALE DEL COMPORTAMENTO A TAGLIO DI TRAVI PREFABBRICATE RETICOLARI MISTE
2014
An experimental campaign of three-point bending tests on specimens of Hybrid Steel Trussed Concrete Beams (HSTCBs) is presented. The scope of the experiments is the evaluation of the shear strength in the structural typology object of study. Two series of specimens are tested, subjected to positive and negative bending moment, respectively, with the aim to reproduce, in the first case, the condition in the midspan of a beam belonging to a framed structure and, in the second case, the behavior of the beam next to the column where the sign of the bending moment is reversed. The obtained experimental results are interpreted by means of an analytical model for the prediction of the shear resist…
Comparative analysis of shear resisting models for hybrid steel trussed concrete beams
2018
The hybrid steel trussed concrete beams represent a structural solution widely adopted in the industrial constructions thanks to the numerous advantages due to their use, such as economic convenience, high performances and constructional speed de-riving from the partial prefabrication process and from the self load-carrying capacity of the beam in the first operative phase, prior to the in-site casting of concrete. The hybrid steel trussed concrete beams examined in the present study are constituted by two prin-cipal components, i.e. a steel joist with inclined rebars, realized in industry, which is welded to a smooth steel plate and then embed-ded within the concrete material cast in situ.…
Numerical Calibration of a Simplified Model for FRP Confinement of Columns
2018
This paper presents the calibration of a simplified analytical model for concrete columns confined by fiber reinforced polymer (FRP) jackets. The model allows evaluating the increase of strength, ductility and dissipated energy without defining the lateral confinement pressure and it can be easily extended for the assessment of FRP confinement in design applications. This model was obtained by a simplified procedure based on the best fit of experimental data available in the literature and the coefficient of determination (R2) was evaluated in order to estimate the accuracy of the regression analysis. A numerical database resulting from finite element (FE) analyses was compiled and reported…